 |
|
 |
|
|
|
|
  KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
|||||||||
Post Reply |
|
|
Thread Tools | Search this Thread |
| 11-28-2014, 02:42 PM | #1 |
|
Registered
0
Rep 1
Posts |
Squared style 220
New to forums and I have searched....
I have an E90 M3, running H&R "race?" (They used to be the Turner version) springs, Bilstein Sports. About a -2.2 negative camber. I am currently running 255/35 and 275/35 PSS on the stock staggered wheels, no spacers. I WANT to run a square set up using the rear wheels. My current rears with the 275/35 are just slightly outside the fender, and rubbed a good hole through the inner fender liner behind the front wheel. My question is do anyone of you guys run, or know of someone who runs, the style 220 square? What size tires are you running? What size spacer did you end up running on the back axle? My goal is to run a very low tread wear rated square setup for the street...AD08R. I drive the car often and autox, it has not been to a track, but will next year. Thanks in advance for your responses and advice. |
Post Reply |
| Bookmarks |
|
|
