Turner Test Pipes

[DopeM3]

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

SOLD

I recently bought these from a forum member here. Unfortunately, something came up forcing me to sell these and a BPM tune which I sold. They are in good condition. Looking for a quick sale.

Here's the original post selling the pipes:

http://www.m3post.com/forums/showthr...highlight=test

Feel free to PM me with any questions. I could take some high quality pictures if needed.


Thanks,

Jay

[THE TECH]

These should sell fast. GLWS.

[DopeM3]

Originally Posted by THE TECH

These should sell fast. GLWS.

Thanks man

[DopeM3]

[DopeM3]

SOLD to 325rider

[325rider]

Originally Posted by AyooooJay

SOLD to 325rider

thanks bud. third forum purchase this week. not sure if compulsive spender

still looking for eibachs ^_^

[DopeM3]

Originally Posted by 325rider

third purchase this week. not sure if compulsive spender

Happens to all of us lol

[325rider]

one pipe was cut on the 02 sensor.

I would also be the fourth owner of these test pipes. Guess i should have looked closely and considered someone may be selling un-usable pipes if I can't get them installed, whether they knew it or not. Im going in tomorrow to have them "installed" but this seems like it may just be a waste of time. LMK.

[325rider]

I hope they can be installed...

[325rider]

no dice. CAN be installed if NEW 2.5" pipe is welded but they have none in house and the install would be as much as new turner pipes almost. Not worth it. Probably won't resell unless someone wants to do that but even welding to it seems no ideal due to the way it was cut and how misshaped the pipe is there where the diameter and shape changes.
**I don't have any negative feelings toward the seller AyooJayy**. All he did was buy and resell. NBD. I have some I suppose to the shop REMOVER or initial reseller. Either way, this sale was provided with pics, i just didn't really notice i admit. I figured they wouldn't have been cut improperly.

Just a message. Look at pics, ask questions, know what you buy. Don't jump the gun. Trolled myself

[///M3THOD]

Originally Posted by 325rider

no dice. CAN be installed if NEW 2.5" pipe is welded but they have none in house and the install would be as much as new turner pipes almost. Not worth it. Probably won't resell unless someone needs it,

I don't have any negative feelings toward the seller AyooJayy. Some I suppose to the shop REMOVER or initial reseller. Either way, this sale was provided with pics, i just didn't really notice i admit. I figured they wouldn't have been cut improperly.

Lol.. WTF?

Refund!

[M3Carbon]

Sorry dude, this totally sucks! Hard to believe welding on a piece of pipe would cost over $300 to do? If you can drive up to Boca my buddy at Euro Auto Tech can probably fix this for a lot less. PM me if you want me to call him.

[DopeM3]

Originally Posted by 325rider

no dice. CAN be installed if NEW 2.5" pipe is welded but they have none in house and the install would be as much as new turner pipes almost. Not worth it. Probably won't resell unless someone wants to do that but even welding to it seems no ideal due to the way it was cut and how misshaped the pipe is there where the diameter and shape changes.
**I don't have any negative feelings toward the seller AyooJayy**. All he did was buy and resell. NBD. I have some I suppose to the shop REMOVER or initial reseller. Either way, this sale was provided with pics, i just didn't really notice i admit. I figured they wouldn't have been cut improperly.

Just a message. Look at pics, ask questions, know what you buy. Don't jump the gun. Trolled myself

Keep me posted with this man

[DopeM3]

Originally Posted by M3Carbon

Sorry dude, this totally sucks! Hard to believe welding on a piece of pipe would cost over $300 to do? If you can drive up to Boca my buddy at Euro Auto Tech can probably fix this for a lot less. PM me if you want me to call him.

I didn't know about this issue at all. Like I explained to 325rider, I bought them and left them sitting in the corner. My plan was to install these in summer, along with a BPM tune I purchase which I had to sell as well. So I just looked inside the box to make sure they were there, but I didn't know this was going to be an issue.

[M3Carbon]

Originally Posted by AyooooJay

I didn't know about this issue at all. Like I explained to 325rider, I bought them and left them sitting in the corner. My plan was to install these in summer, along with a BPM tune I purchase which I had to sell as well. So I just looked inside the box to make sure they were there, but I didn't know this was going to be an issue.

I'm not questioning your integrity bro, just trying to offer help in an unfortunate situation. Ultimately, I think it's the person you bought them from originally who should feel guilty about this.

[325rider]

Yea. Super lame. O well. Ill prob just accept the 275$ loss... -___-

[///M3THOD]

Originally Posted by 325rider

Yea. Super lame. O well. Ill prob just accept the 275$ loss... -___-

Did these come from BLM3.. to him from akh23456?

You should get your money back, the person who removed these or had them removed is at fault here.

[DopeM3]

Originally Posted by ///M3THOD

Did these come from BLM3.. to him from akh23456?

You should get your money back, the person who removed these or had them removed is at fault here.

They were sold to me the way they were. If you look close on BLM3, you could see it's been cut close to the o2 sensor as well, which like 325rider I did not notice until 325rider contacted me saying there was something wrong with them. So the guy that removed them for akh23456 did a terrible job here.

As I said to 325rider, I really wish I could refund but I'm out of luck right now. In reality, all that pipe needs is to have a small piece of 2.5 pipe added, I can't imaging that would cost more than 50 bucks to do.

[325rider]

Originally Posted by AyooooJay

They were sold to me the way they were. If you look close on BLM3, you could see it's been cut close to the o2 sensor as well, which like 325rider I did not notice until 325rider contacted me saying there was something wrong with them. So the guy that removed them for akh23456 did a terrible job here.

As I said to 325rider, I really wish I could refund but I'm out of luck right now. In reality, all that pipe needs is to have a small piece of 2.5 pipe added, I can't imaging that would cost more than 50 bucks to do.

I suppose that is a good point. But the pipe that HASNT been cut slips on or has increasing diameter and a lip. a straight 2.5" wouldn't have that...

[///M3THOD]

Originally Posted by 325rider

I suppose that is a good point. But the pipe that HASNT been cut slips on or has increasing diameter and a lip. a straight 2.5" wouldn't have that...

You could have any exhaust shop put the pipping on a pipe expander to accomplish the male/female mating of the pipe connection.

[325rider]

Originally Posted by ///M3THOD

You could have any exhaust shop put the pipping on a pipe expander to accomplish the male/female mating of the pipe connection.

hmm. I just don't know if its worth the hassle

I suppose id need to go to a good muffler shop as the shop i was at, which did great work on my spring install, didn't recommend I install them