19x10.5 et22 all four corners?

TRY...M3 · 07-19-2012, 08:21 PM

Is it possible to run that set up, just H&R springs or do I need to adjust the camber?

THE TECH · 07-19-2012, 08:23 PM

I know that 10 +25 front and 11 +25 rear fits on H&R.

TRY...M3 · 07-19-2012, 08:29 PM

Quote:

Originally Posted by THE TECH

I know that 10 +25 front and 11 +25 rear fits on H&R.

Me too, thats what my VMR's are.

THE TECH · 07-19-2012, 08:31 PM

I think camber adjustment may come down to tire size.

TRY...M3 · 07-19-2012, 08:48 PM

Quote:

Originally Posted by THE TECH

I think camber adjustment may come down to tire size.

I was thinking 265/30/19 or 275/30/19 whatever works

THE TECH · 07-19-2012, 08:55 PM

Quote:

Originally Posted by TRY...M3

I was thinking 265/30/19 or 275/30/19 whatever works

Not very wide so I would see no issue.

TRY...M3 · 07-19-2012, 09:04 PM

Quote:

Originally Posted by THE TECH

Quote:

Originally Posted by TRY...M3

I was thinking 265/30/19 or 275/30/19 whatever works

Not very wide so I would see no issue.

Thanks bro well see

Malek@MRF · 07-19-2012, 09:05 PM

If you have any form of coil-over suspension, this will not fit. The wheel/tire will hit the shock and spring.

TRY...M3 · 07-19-2012, 09:19 PM

Quote:

Originally Posted by Malek@MRF

If you have any form of coil-over suspension, this will not fit. The wheel/tire will hit the shock and spring.

Im just on H&R springs....This is why I didnt order the GC kit from you yet

chuxdelux · 07-20-2012, 04:05 AM

I don't see why it shouldn't fit. Check this thread out.
http://www.m3post.com/forums/showthread.php?t=720343
I know these are 18's but you get the picture.

Grail05 · 07-20-2012, 08:24 AM

It will work as long as you dont put wide tires in the front...

I suggest to get a staggered set up due to extra weight that you dont need. Plus if you are using 265 front it will look stretch on a 10.5 wheel...

I like running tires that over lap a bit on the wheels to avoid wheel rub.... with the set up your looking for it will rub on turns... since all M3 are built differently some will only rub at full lock.

TRY...M3 · 07-20-2012, 11:08 AM

Quote:

Originally Posted by chuxdelux

I don't see why it shouldn't fit. Check this thread out.
[intlink]720343;Feeler: Volk TE37 18x10.5 ET22 All Around w/Hankook R-S3[/intlink]
I know these are 18's but you get the picture.

I spoke to him and he adjusted the camber..

TRY...M3 · 07-20-2012, 11:09 AM

Quote:

Originally Posted by Sean05

It will work as long as you dont put wide tires in the front...

I suggest to get a staggered set up due to extra weight that you dont need. Plus if you are using 265 front it will look stretch on a 10.5 wheel...

I like running tires that over lap a bit on the wheels to avoid wheel rub.... with the set up your looking for it will rub on turns... since all M3 are built differently some will only rub at full lock.

Thanks, I was thinking 265 just so it didn't rub. I was afraid a 275 would be too much.

Grail05 · 07-20-2012, 12:45 PM

Quote:

Originally Posted by TRY...M3

Thanks, I was thinking 265 just so it didn't rub. I was afraid a 275 would be too much.

I was running 275 30 19 before and even on 30 i was rubbing on full lock badly... ... if your going to run 275 35 19 that will kill it specially with a 10.5 wheels.

yea i would run 265.. but with 10.5 on a 265 is a bit small though...

TRY...M3 · 07-20-2012, 05:42 PM

Quote:

Originally Posted by Sean05

Quote:

Originally Posted by TRY...M3

Thanks, I was thinking 265 just so it didn't rub. I was afraid a 275 would be too much.

I was running 275 30 19 before and even on 30 i was rubbing on full lock badly... ... if your going to run 275 35 19 that will kill it specially with a 10.5 wheels.

yea i would run 265.. but with 10.5 on a 265 is a bit small though...

I know a 265 might be too much of a stretch.

07-19-2012, 08:21 PM	#1
TRY...M3 Major 85 Rep 1,430 Posts Drives: Depends on the day Join Date: Nov 2010 Location: PA iTrader: (2)	19x10.5 et22 all four corners? Is it possible to run that set up, just H&R springs or do I need to adjust the camber?
	Appreciate 0 Tweet Quote

07-19-2012, 08:23 PM	#2
THE TECH BimmerPost Supporting Vendor 307 Rep 13,093 Posts Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas iTrader: (45) Garage List 2013 Nissan GTR [0.00] 2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00]	I know that 10 +25 front and 11 +25 rear fits on H&R.
	Appreciate 0 Quote

07-19-2012, 08:31 PM	#4
THE TECH BimmerPost Supporting Vendor 307 Rep 13,093 Posts Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas iTrader: (45) Garage List 2013 Nissan GTR [0.00] 2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00]	I think camber adjustment may come down to tire size.
	Appreciate 0 Quote

07-19-2012, 09:05 PM	#8
Malek@MRF BimmerPost Supporting Vendor 731 Rep 3,735 Posts Drives: E92 M3, E46 M3, G82 M4 Join Date: Jan 2008 Location: Irvine, California iTrader: (5)	If you have any form of coil-over suspension, this will not fit. The wheel/tire will hit the shock and spring. __________________ BMW PERFORMANCE SPECIALISTS. Race Engines. Suspension. F/I. Brakes. Race Preparation. Factory Service. Alignments. OFFICIAL PARTNERS: KW. MOTON. Brembo. AP Racing. BBS Motorsport. iND. HRE. Turner Motorsport. VAC. BMW Motorsport. Facebook \| Instagram \| Yelp! \| Flikr Phone: 949-233-0448 \| E-Mail: info@mrfengineering.com
	Appreciate 0 Quote

07-20-2012, 04:05 AM	#10
chuxdelux Captain 15 Rep 646 Posts Drives: 1988/1998/2005 M3 Join Date: Jul 2011 Location: Scottsdale, AZ iTrader: (1)	I don't see why it shouldn't fit. Check this thread out. http://www.m3post.com/forums/showthread.php?t=720343 I know these are 18's but you get the picture.
	Appreciate 0 Quote

07-20-2012, 08:24 AM	#11
Grail05 Putcha ang ganda... 281 Rep 5,441 Posts Drives: 17 F82 M4 Join Date: Feb 2010 Location: Los Angeles, Brea CA. iTrader: (10)	It will work as long as you dont put wide tires in the front... I suggest to get a staggered set up due to extra weight that you dont need. Plus if you are using 265 front it will look stretch on a 10.5 wheel... I like running tires that over lap a bit on the wheels to avoid wheel rub.... with the set up your looking for it will rub on turns... since all M3 are built differently some will only rub at full lock. __________________
	Appreciate 0 Quote