Sponsored by The Tire Rack

[325rider]

in 4 maor pics. Loving this setup so far

[AlexN]

cant wait for the next photoshoot!

[Powerbeast]

Originally Posted by tbone28

I think you should run more aggressive front offsets to match that rear. You can, too. In your pics, the rears are already reverse-mounted, but fronts are not, so it's easy to make your fronts more aggressive by reverse mounting the faces. IIRC, reverse mounting an LM face gives about 6mm, so you'd be at a +19. Will better match the poke you may have in the rear.

Revers mounting the front

Thank you T

[paradocs98]

Originally Posted by paradocs98

Beautiful. CPWINCH did indeed call it--I remember his suggestion from that prior thread.

LMs are so amazing. I had them on my E60 M5, and now chris s is sporting my set on his white E92 M3.

I'm assuming "reverse mounting" the faces just means reassembling the wheel so that the wheel face is now sandwiched between the inner and outer rim halves instead of the wheel face being mounted to the outside of the outer rim half. So offset becomes more aggressive by going inner rim half/wheel face/outer rim half instead of inner half/outer half/wheel face. Does doing this in any way negatively affect the wheel's strength or integrity by changing the load distribution from the original design?

Why yes, paradocs, that is what reverse mounting means, even though it sounds like a bit of a misnomer.

[paradocs98]

Originally Posted by paradocs98

Why yes, paradocs, that is what reverse mounting means, even though it sounds like a bit of a misnomer.

Thanks for the reply, paradocs. I appreciate it.

[Its_lobelt]

Originally Posted by Powerbeast

I'm thinking 255/35 fronts and 285/30 rears

BTW Michelin doesn't make the PSS in 285's so you gotta look into different brands.

[Powerbeast]

Originally Posted by ROB_S2K

BTW Michelin doesn't make the PSS in 285's so you gotta look into different brands.

You sure are correct I'm thinking a P Zero may be in the works

[tbone28]

Good luck trying to get Michelins on with those offsets! P Zeros, T1Rs would be better options. Good to see you're going to reverse mount the front. Not only does it match up the offsets better, but it would look funny to have one axle reverse-mounted and the other axle not.

[Powerbeast]

Originally Posted by tbone28

Good luck trying to get Michelins on with those offsets! P Zeros, T1Rs would be better options. Good to see you're going to reverse mount the front. Not only does it match up the offsets better, but it would look funny to have one axle reverse-mounted and the other axle not.

Your absolutely right. Are you cambered in the rear as well?

[tbone28]

-2 but I'm no where near as aggressive as you will be.

[bmwaddict]

5 days without any info feels like 5 years so...wanna share something new with us?

[NYBulldog]

Just when I thought your car was perfect. Now these?

[Powerbeast]

Originally Posted by bmwaddict

5 days without any info feels like 5 years so...wanna share something new with us?

Updates are coming this week

[Powerbeast]

Originally Posted by bmwaddict

5 days without any info feels like 5 years so...wanna share something new with us?

Raw brush

[tbone28]

oh wow, you went brushed!

[bobs619]

sick! @floss_design is refinishing my LM-Rs as well. It will be similar to urs, tbone28. Thx for the inspiration bro!

[Powerbeast]

Originally Posted by tbone28

oh wow, you went brushed!

[Brian@MWP]

Love the finish. Never can go wrong with BBS!

[bmwaddict]

u r amazing man. you always go above and beyond unexpected with your mods like a boss it

[Powerbeast]

Originally Posted by DavisKujala

There are many types of detectors in the market, so it is really hard to make a decision which one to buy and whee to buy. I searched the internet for a long time and then I bought a gold metal detector, which is really helpful. And when I do metal detecting outside it can really distinguish what kind of the metal that it has detected and give an indication for me. And by using such kind of device I have saved a lot of time and energy. In a word, I love the gold metal detector and have confidence in it.

: :

[datbimmerdoe]

Originally Posted by DavisKujala

There are many types of detectors in the market, so it is really hard to make a decision which one to buy and whee to buy. I searched the internet for a long time and then I bought a gold metal detector, which is really helpful. And when I do metal detecting outside it can really distinguish what kind of the metal that it has detected and give an indication for me. And by using such kind of device I have saved a lot of time and energy. In a word, I love the gold metal detector and have confidence in it.

[Its_lobelt]

Originally Posted by the infamous...

Your posts crack me up lol