E92 M3 Alignment setting After installed KW HAS kit

Wordy29 · 09-02-2018, 10:39 AM

Have any of you guys do the alignment after installed the kw has kit? Any alignment specs recommend? Thanks

6ixSpd · 09-03-2018, 05:28 PM

Same as any other alignment that is used for our cars unless you want to accomplish something outside factory specs...

youngtimer55 · 09-05-2018, 12:10 AM

I'm running -1.5 degrees of camber in the front and -1.9 in the rear. For the toe, I'm running .1 degrees toe in for the rear. I have an aggressive drop on mine, so if you're not slamming the car like I did, then I think the stock alignment should be fine. I could be wrong though. But, I hope this helps!

M43S7RO · 09-06-2018, 01:34 PM

-2.1 front and -1.8 rear on ground control conversion kit.

Teufel_Hunden · 09-07-2018, 08:01 AM

I've done a great deal of searching and cannot find a DIY (specifically) for the KW HAS kit.

Anyone know of one? Thanks!!

M43S7RO · 09-07-2018, 09:13 AM

I used the front and rear spring removal diys to get the oem suspension off. My GC kit came with a diagram that showed how the parts stacked together.

If you didn't get a diagram maybe some one can take a pic of their suspension for you to use as a reference.

Quote:

Originally Posted by Teufel_Hunden

I've done a great deal of searching and cannot find a DIY (specifically) for the KW HAS kit.

Anyone know of one? Thanks!!

OneSickM · 09-08-2018, 09:34 PM

Quote:

Originally Posted by Wordy29

Have any of you guys do the alignment after installed the kw has kit? Any alignment specs recommend? Thanks

Quote:

Originally Posted by Teufel_Hunden

I've done a great deal of searching and cannot find a DIY (specifically) for the KW HAS kit.

Anyone know of one? Thanks!!

I have KW HAS installed on my car and I am not having comfort mode at all even when I set EDC to comfort level. Are you guys experiencing this? Do you have OEM ride quality after KW install?

Teufel_Hunden · 09-10-2018, 07:23 PM

Quote:

Originally Posted by M43S7RO

I used the front and rear spring removal diys to get the oem suspension off. My GC kit came with a diagram that showed how the parts stacked together.

If you didn't get a diagram maybe some one can take a pic of their suspension for you to use as a reference.

Quote:

Originally Posted by Teufel_Hunden

I've done a great deal of searching and cannot find a DIY (specifically) for the KW HAS kit.

Anyone know of one? Thanks!!

Thanks. I've looked over the instructions, just want to make sure I have them assembled correctly.

09-02-2018, 10:39 AM	#1
Wordy29 New Member 1 Rep 16 Posts Drives: E92 m3 Join Date: Aug 2018 Location: AZ iTrader: (0)	E92 M3 Alignment setting After installed KW HAS kit Have any of you guys do the alignment after installed the kw has kit? Any alignment specs recommend? Thanks
	Appreciate 0 Tweet Quote

09-03-2018, 05:28 PM	#2
6ixSpd Save the manuals! 6012 Rep 6,740 Posts Drives: '16 M3, '23 718 Spyder Join Date: Feb 2016 Location: 416 iTrader: (4)	Same as any other alignment that is used for our cars unless you want to accomplish something outside factory specs... __________________ '16 M3 \| '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc
	Appreciate 0 Quote

09-05-2018, 12:10 AM	#3
youngtimer55 "Cool Prius" - Nobody 28 Rep 32 Posts Drives: E92 M3 ZCP, E39 M5, Prius Join Date: Nov 2017 Location: Orange County, CA iTrader: (0)	I'm running -1.5 degrees of camber in the front and -1.9 in the rear. For the toe, I'm running .1 degrees toe in for the rear. I have an aggressive drop on mine, so if you're not slamming the car like I did, then I think the stock alignment should be fine. I could be wrong though. But, I hope this helps!
	Appreciate 0 Quote

09-06-2018, 01:34 PM	#4
M43S7RO Major 502 Rep 1,055 Posts Drives: Jerez Black E92 M3 Join Date: Sep 2015 Location: Peoria, AZ iTrader: (13)	-2.1 front and -1.8 rear on ground control conversion kit.
	Appreciate 0 Quote

09-07-2018, 08:01 AM	#5
Teufel_Hunden Banned 8355 Rep 2,963 Posts Drives: 2013 M3 6MT LMB ZCP Join Date: Feb 2012 Location: Maryland iTrader: (3)	I've done a great deal of searching and cannot find a DIY (specifically) for the KW HAS kit. Anyone know of one? Thanks!!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search