Apex arc 8 in black

[dcgolfdr]

Anyone in the area that wants to swap OEM 18's or 19's with tires for a set of Apex arc 8 in black. 18x10 up front and 18x10.5 in the rear. Mounted up to Hankook RS3 275/35/18 front and 285/35/18 in the back. Trade straight up, need this weekend since my car is going to be sold next week.

[M3SQRD]

Originally Posted by dcgolfdr

Anyone in the area that wants to swap OEM 18's or 19's with tires for a set of Apex arc 8 in black. 18x10 up front and 18x10.5 in the rear. Mounted up to Hankook RS3 275/35/18 front and 285/35/18 in the back. Trade straight up, need this weekend since my car is going to be sold next week.

I might be interested. How much tread is left on the RS3s? Condition of wheels? Do the wheels currently have TPMS mounted? I have a set of OEM 18" (Gunmetal, no damage, no curb rash) with PS2s (~60+% tread remaining).

[dcgolfdr]

Wheels are free of all blemishes, 2011 TPMS mounted, at least 60% tread left, hell I will throw in two more rears for $150 bucks

[dcgolfdr]

These were track wheels that I used for 3 days, I bought them from another member, I never took out the wrong year TPMS for the correct year

[M3SQRD]

Originally Posted by dcgolfdr

These were track wheels that I used for 3 days, I bought them from another member, I never took out the wrong year TPMS for the correct year

That's one issue - I have a '09 that uses the pre-2010 TPMS. If I do the swap I'd have to get my brother-in-law to swap TPMS. Would that cause you a problem because now your car will show a TPMS error?

[dcgolfdr]

I have another set of wheels that I could break down and get 08 TPMS, I could get them out and put them in apex, I have a guy that can do that but I want to make sure you are serious before doing that

[M3SQRD]

Originally Posted by dcgolfdr

I have another set of wheels that I could break down and get 08 TPMS, I could get them out and put them in apex, I have a guy that can do that but I want to make sure you are serious before doing that

The front wheel has an offset of 27 mm, correct? I'm running an aftermarket suspension with short damper bodies so my only concern is a 10" wide et27 wheel with a 275 tire may end up rubbing on the locking collars and/or sway bar mount (threaded onto the damper). Ideally, I'd like to perform a fit check but I don't want to create any problems or incovienence you.

[dcgolfdr]

25 up front

[dcgolfdr]

I do have some RACs 19x9 and 19x10 I'd you wanted those, I would ask for some cash on top though, those have 2008 TPMS

[MDIAU]

Originally Posted by dcgolfdr

I do have some RACs 19x9 and 19x10 I'd you wanted those, I would ask for some cash on top though, those have 2008 TPMS

How much cash in addition to my OEM 19's 220 w/ tires

[M3SQRD]

Originally Posted by dcgolfdr

I do have some RACs 19x9 and 19x10 I'd you wanted those, I would ask for some cash on top though, those have 2008 TPMS

I just spent a decent amount of money on new wheels so it would be a difficult to convince my wife to let me purchase another set of wheels!

I definitely want them but I also do not want to get stuck with a set of wheels I can't use! Give me until tomorrow to see if I can figure something out (test fit some other wheels, etc). One other possibility...My brother-in-law is a tech at BMW of Alexandria - if I let him take my car in any chance you could meet him there and let him do a fit check? Feel free to send me PM if you like to communicate that way.

BTW, if you can't find an axle-back exhaust I have my stock exhaust sitting in my basement.

[joker_20_02]

want to do a straight up sale? If so how much?

[dcgolfdr]

Originally Posted by joker_20_02

want to do a straight up sale? If so how much?

PM sent, also no longer need to swap wheels.