F**k Me! - They're almost here! E9X Harnesses!

[E92M356789]

Too late, I already purchased the Mini a while back and they work great.

[DB]

Originally Posted by socrates42

Where did you mound the outside front anchor on the sedan? All the instructions I found are only for the E92 and they use the seatbelt slider floor location.

I know this is pretty old, but is there an answer to this? I installed last night to the same spot as the standard seatbelt (under the cover on driver's seat), but the anchor digs into the seat bolster badly. Wondering if it is ok to bend the anchor away from the seat?

[surlynkid]

Bend the tab as necessary but no more than 90 degrees in any direction. I remove the outboard seat mounting bolt just under the driver seat. Slip the stubby end Schroth piece under the rail, and bolt it back down. It rubs nothing.

[socrates42]

Originally Posted by surlynkid

Bend the tab as necessary but no more than 90 degrees in any direction. I remove the outboard seat mounting bolt just under the driver seat. Slip the stubby end Schroth piece under the rail, and bolt it back down. It rubs nothing.

Thanks that incredibly helpful! (I still haven't installed mine but now that I know I will)

[zmans3]

Originally Posted by DB

I know this is pretty old, but is there an answer to this? I installed last night to the same spot as the standard seatbelt (under the cover on driver's seat), but the anchor digs into the seat bolster badly. Wondering if it is ok to bend the anchor away from the seat?

How did you get the side panel off the seat to reach the bolt? Do you have pictures, by chance?

I found a link to the TIS removal instructions here: <http://www.e90post.com/forums/showthread.php?t=794807>, but a) the diagrams are not terribly clear, b) they're for an E92 so may not be accurate for E90.

[longbow0404]

Originally Posted by LiM3y

http://www.hmsmotorsport.com/

http://www.hmsmotorsport.com/search/id/3287

We'll have to find something else to bitch and laugh about!

nice..