New member saying Hi

js2000 · 09-30-2009, 09:57 PM

hi guys,

Just moved here from California. Bought my new m3 from BMW of freehold 3 weeks ago.

After repeated 'searches' on this forum. I also bought the following:

1) MS filter (installed)
2) RPi scoop
3) Lux angel light
4) Rogue pulley
5) Hamann style front lip
6) Eibach springs
7) ACS type III style 19" rims + tires (not mounted)
8) MS 15/12mm spacers

PS. Anyone know where i can get all of the above installed near West Orange? please please PM me!!

I have checked out the recommended install shop, but they are all 25+ min away!

dillon733 · 10-02-2009, 09:00 AM

Welcome!!!.
sorry i cant help you out with an installer in jersey. if you need anyone in NY though i can help u out.
BTW is ur cart jet black or jerez. its tough to tell in the picture

monsta · 10-02-2009, 04:31 PM

You should get the Rogue pulley's installed at ROGUE nothing like having the guys who made the product install it too & I'm sure they could do some of the other stuff but ask the first. Also depending on which way you travel they are about 20-30min away, but worth it IMO

http://www.rogueengineering.com

(201) 444-8150‎

js2000 · 10-02-2009, 05:44 PM

The car is jerez black!

so far..the only place I found that could do it is this little Gas Station automotive shop

working from 9-7pm monday-friday means i cant go to quality shop like rogue engineering....

anyone knew any good shop that is open on saturday please let me (noob) know!

thanks!

M3#3 · 10-03-2009, 01:12 PM

+1 on going directly to Rogue, it's worth the trip.

09-30-2009, 09:57 PM	#1
js2000 Private 12 Rep 72 Posts Drives: 2009 BMW m3 Join Date: Sep 2009 Location: West Orange NJ iTrader: (0)	New member saying Hi hi guys, Just moved here from California. Bought my new m3 from BMW of freehold 3 weeks ago. After repeated 'searches' on this forum. I also bought the following: 1) MS filter (installed) 2) RPi scoop 3) Lux angel light 4) Rogue pulley 5) Hamann style front lip 6) Eibach springs 7) ACS type III style 19" rims + tires (not mounted) 8) MS 15/12mm spacers PS. Anyone know where i can get all of the above installed near West Orange? please please PM me!! I have checked out the recommended install shop, but they are all 25+ min away! Attached Images
	Appreciate 0 Tweet Quote

10-02-2009, 09:00 AM	#2
dillon733 Major 96 Rep 1,196 Posts Drives: Jet Black e92 M3 Join Date: Oct 2007 Location: new york iTrader: (3)	Welcome!!!. sorry i cant help you out with an installer in jersey. if you need anyone in NY though i can help u out. BTW is ur cart jet black or jerez. its tough to tell in the picture
	Appreciate 0 Quote

10-02-2009, 04:31 PM	#3
monsta Brigadier General 218 Rep 3,592 Posts Drives: E92 M3 Join Date: Oct 2006 Location: Bergen County, NJ/Y.O, NY iTrader: (2)	You should get the Rogue pulley's installed at ROGUE nothing like having the guys who made the product install it too & I'm sure they could do some of the other stuff but ask the first. Also depending on which way you travel they are about 20-30min away, but worth it IMO http://www.rogueengineering.com (201) 444-8150‎ __________________ '08 E92 M3 6MT \| IB \| FR \| RAC RG63's \| VRS Ti Exhaust \| Fabspeed HFC & Xpipe '09 X5 35d SG/SB '11 X3 28i AW/CN/FW (wife's car
	Appreciate 0 Quote

10-02-2009, 05:44 PM	#4
js2000 Private 12 Rep 72 Posts Drives: 2009 BMW m3 Join Date: Sep 2009 Location: West Orange NJ iTrader: (0)	The car is jerez black! so far..the only place I found that could do it is this little Gas Station automotive shop working from 9-7pm monday-friday means i cant go to quality shop like rogue engineering.... anyone knew any good shop that is open on saturday please let me (noob) know! thanks!
	Appreciate 0 Quote

10-03-2009, 01:12 PM	#5
M3#3 Private 8 Rep 54 Posts Drives: sold someone else drives it :( Join Date: May 2008 Location: Northern NJ iTrader: (0)	+1 on going directly to Rogue, it's worth the trip.
	Appreciate 0 Quote