Lux V5 E92 Install

[gobby]

Hi all, this might be a pretty amateur question, and I have tried to search around for the answer: When installing the LUX V5 angel eye LEDs, where do you put the unit with the switches on it? Is it worth double sided tapeing it down to the most inner-ward area in the headlight housing, or does it not really matter/ it doesnt get hot enough in there to really matter if the wire or unit or touching the heatsinks etc?

[BimmerRookie]

Stuff it in the top of the housing and close the lid! At least thats what I thought was acceptable..

[gobby]

Originally Posted by BimmerRookie

Stuff it in the top of the housing and close the lid! At least thats what I thought was acceptable..

Lol ok I won't worry about it then, thanks!

[Jonnykin]

Originally Posted by gobby

Lol ok I won't worry about it then, thanks!

Lots of threads around on this one, but if you can't find anythign specific to that I'd contact Lux. They seem to have really good customer support.

[LuxAngelEyes]

Yes you can drop the power supply right inside the headlight and then close up the headlight to keep it sealed. It will be safe inside there as there is a lot of room in the M3 headlights