NEW DESIGN - VMR | Wheels

VMRWheels · 02-25-2009, 12:37 AM

Here at VMR, we are continually striving to bring you new designs and fitments. It didn't stop with the 19x10 VB3 (CSL). Nor will it stop with this newest iteration of what a concave wheel should be.

We are pleased to announce the arrival of our newest model wheel, the VMR Wheels V713. Combining a concave face with a wide split-5 design, the V713 delivers that aggressive yet classy look for your luxury European vehicle. Similar to our other recent designs, the lip depth has also been increased to add a deeper overall dimension to the wheel. The increased concavity also allows for fitment with most, if not all aftermarket big brake kits.

The V713 features an exclusive powdercoated Hypersilver finish, allowing for greater shine and durability. Normally, powdercoating costs up to $100 per wheel. However, there will be no surcharge for wheels powdercoated at the factory.

Currently available in the 19x8.5 and 19x9.5 fitment, the V713 will be compatible with the E90, E92, E90M3, E92M3, E46, E46 M3, E60, and many others. With bolt pattern, offset & centerbore machined specifically to factory specs, there will be no need for hub rings or adaptors. New colors & fitments will be offered in the coming months.

On to the photos....

doba_s · 02-25-2009, 12:43 AM

looks good ! long why is your trunk all black ?

MrHarris · 02-25-2009, 03:05 AM

These look real sexy.

Kev · 02-25-2009, 06:05 AM

Quote:

Originally Posted by doba_s

looks good ! long why is your trunk all black ?

That's probably the prototype E90 VRS trunk on Long's car

chris s · 02-25-2009, 08:15 AM

Very nice....similar design to the HRE P43. Why only a 19x9.5 though and not a 10 or an 11?

FStop7 · 02-25-2009, 09:13 AM

weight?

CeeBoogie · 02-25-2009, 09:27 AM

I like, question though. How come all of your rims have the middle cap part out? Why not make them more like HRE wheels so the the center is deeper in? They would look much better like that if you ask me!!!

Loseit · 02-25-2009, 02:31 PM

now those look tough!! nice!

!Xoible · 02-25-2009, 03:01 PM

how big are the spacers you guys used with long's car?

noxredna · 02-25-2009, 03:29 PM

weight?
When are the other finishes going to be released? pre-orders?

gthirtyfizle · 02-25-2009, 03:49 PM

Its a good looking wheel but for some reason something just doesnt look right

cipher5 · 02-25-2009, 09:08 PM

Quote:

Originally Posted by gthirtyfizle

Its a good looking wheel but for some reason something just doesnt look right

I agree, needs to be 20". Any chance you guys will make a 20" variety of your wheels?

boostedtwin · 02-25-2009, 09:37 PM

20's x 10 or 10.5 with an aggressive offset and this will be a hit.

nmulax · 02-25-2009, 10:34 PM

So if they fit the E46 M3, should be good for the Z4M coupe too right?
Powdercoated black, and I think I have my next wheel.

positiveions · 02-25-2009, 11:08 PM

nice nice. yepe yepe. i approve

bigjae1976 · 02-26-2009, 12:24 PM

YES! Hopefully, they'll come out with a 19x10.5 rear fitment!

nvk · 02-27-2009, 01:07 AM

Nice! That looks awesome

EOE90 · 02-27-2009, 02:54 AM

please make both these and the v710 in 20 inch, pretty pretty please

VMRWheels · 02-27-2009, 06:43 PM

Quote:

Originally Posted by chris s

Very nice....similar design to the HRE P43. Why only a 19x9.5 though and not a 10 or an 11?

If your looking into a 10", take a look our newly released VB3's in 19x10 +25 offset.

http://www.m3post.com/forums/showthread.php?t=202923

Quote:

Originally Posted by FStop7

weight?

Weights will be announced once they arrive to our warehouse on Mar. 19th.

Quote:

Originally Posted by CeeBoogie

I like, question though. How come all of your rims have the middle cap part out? Why not make them more like HRE wheels so the the center is deeper in? They would look much better like that if you ask me!!!

We opted for the raised center cap because we felt like it would flow better with the smooth concaved face just like our VB3's and V710's. We designed the bore to use OEM BMW spec caps.

Quote:

Originally Posted by !Xoible

how big are the spacers you guys used with long's car?

These were the prototype set and he was running E90 offsets. Final fitment will NOT require any spacers.

Quote:

Originally Posted by nmulax

So if they fit the E46 M3, should be good for the Z4M coupe too right?
Powdercoated black, and I think I have my next wheel.

Thats right! 19x8.5 +35 19x9.5 +22.

-Charles@VMRWheels

chompino · 02-27-2009, 07:23 PM

These wheels look great!

!Xoible · 02-27-2009, 07:37 PM

Quote:

Originally Posted by VMRWheels

If your looking into a 10", take a look our newly released VB3's in 19x10 +25 offset.

http://www.m3post.com/forums/showthread.php?t=202923

Weights will be announced once they arrive to our warehouse on Mar. 19th.

We opted for the raised center cap because we felt like it would flow better with the smooth concaved face just like our VB3's and V710's. We designed the bore to use OEM BMW spec caps.

These were the prototype set and he was running E90 offsets. Final fitment will NOT require any spacers.

Thats right! 19x8.5 +35 19x9.5 +22.

-Charles@VMRWheels

that's awesome! keep it up yo... no pun intended

michaeldorian · 02-27-2009, 10:36 PM

Wow. Nice job. Excellent design.

02-25-2009, 12:37 AM	#1
VMRWheels General 2038 Rep 25,989 Posts Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA iTrader: (4) Garage List 2013 BMW M3 [10.00] 2015 BMW M4 [0.00] 2013 BMW F30 [0.00] 2014 BMW F22 [0.00] 2013 BMW F06 [0.00]	NEW DESIGN - VMR \| Wheels - V713 Here at VMR, we are continually striving to bring you new designs and fitments. It didn't stop with the 19x10 VB3 (CSL). Nor will it stop with this newest iteration of what a concave wheel should be. We are pleased to announce the arrival of our newest model wheel, the VMR Wheels V713. Combining a concave face with a wide split-5 design, the V713 delivers that aggressive yet classy look for your luxury European vehicle. Similar to our other recent designs, the lip depth has also been increased to add a deeper overall dimension to the wheel. The increased concavity also allows for fitment with most, if not all aftermarket big brake kits. The V713 features an exclusive powdercoated Hypersilver finish, allowing for greater shine and durability. Normally, powdercoating costs up to $100 per wheel. However, there will be no surcharge for wheels powdercoated at the factory. Currently available in the 19x8.5 and 19x9.5 fitment, the V713 will be compatible with the E90, E92, E90M3, E92M3, E46, E46 M3, E60, and many others. With bolt pattern, offset & centerbore machined specifically to factory specs, there will be no need for hub rings or adaptors. New colors & fitments will be offered in the coming months. On to the photos.... __________________ VMR\|Wheels \| 714.442.7916 \| sales@velocitymotoring.com \| www.velocitymotoring.com \| facebook \| flickr \| Instagram
	Appreciate 0 Tweet Quote

02-25-2009, 12:43 AM	#2
doba_s Major General 405 Rep 6,107 Posts Drives: X7 l Cayenne l 997.2RS Join Date: Sep 2006 Location: Danville iTrader: (26)	looks good ! long why is your trunk all black ?
	Appreciate 0 Quote

02-25-2009, 03:05 AM	#3
MrHarris yodog 197 Rep 5,025 Posts Drives: '86 Corolla Join Date: Jun 2007 Location: Diamond Bar, Ca iTrader: (5) Garage List 2009 BMW [10.00]	These look real sexy. __________________ 2009 E92 M3 \| Alpine White \| Black Extended \| Advan RS \| Turner Test Pipes \| Dinan Axle-Back \| OETuning \| Eibach Springs \| UUC SSK \| VRS Front Lip \| VRS Type I Diffuser \| Matte Black \| RPi Scoops \| MS Filter \| Yokohama AD08 \| F1 Pinnacle Special Thanks: Gintani \| OETuning \| eAs
	Appreciate 0 Quote

02-25-2009, 08:15 AM	#5
chris s Major General 1250 Rep 6,912 Posts Drives: 2022 Dravit G80 M3 Join Date: Oct 2008 Location: New York iTrader: (12)	Very nice....similar design to the HRE P43. Why only a 19x9.5 though and not a 10 or an 11? __________________ 2022 Dravit/Fiona M3cx - Dinan midpipe w/VC, NW Carbonhaus CF, AST Springs, FC Spacers...more to come! 2016 Indi F80 M3 - SMB\|Amaro \| Mode Carbon \| ESS \| Akra EVO \| KW HAS...SOLD 2012 MR e92 M3 DCT, ESS SC, Brembo BBK, BBS FI... GONE but not forgotten! 2008 AW e92 M3 6MT, ESS SC, BBS LM's...SOLD!
	Appreciate 0 Quote

02-25-2009, 09:13 AM	#6
FStop7 I like cars 329 Rep 5,052 Posts Drives: M6 Join Date: Oct 2008 Location: Newbury Park, CA iTrader: (3)	weight? __________________ My photostream: http://www.flickr.com/photos/racelap/
	Appreciate 0 Quote

02-25-2009, 09:27 AM	#7
CeeBoogie Private First Class 16 Rep 109 Posts Drives: E46 M3 Join Date: May 2008 Location: Long Island NY iTrader: (0)	I like, question though. How come all of your rims have the middle cap part out? Why not make them more like HRE wheels so the the center is deeper in? They would look much better like that if you ask me!!!
	Appreciate 0 Quote

02-25-2009, 02:31 PM	#8
Loseit Second Lieutenant 11 Rep 237 Posts Drives: 2008 AW/CR/CF E92 M3 Join Date: Dec 2007 Location: Chicago iTrader: (4)	now those look tough!! nice! __________________ 2008 AW/FR/CF E92 M3 Retired: 2008 BSM/Saddle/Al 335Coupe Retired: 2001 Acura CL-S
	Appreciate 0 Quote

02-25-2009, 03:01 PM	#9
!Xoible Banned 832 Rep 46,029 Posts Drives: .... Join Date: Nov 2006 Location: . iTrader: (4) Garage List 2008 M3 [4.00] 2007 335i [9.00] 2008 528i [8.00] 2006 Infiniti - G35 ... [8.00]	how big are the spacers you guys used with long's car?
	Appreciate 0 Quote

02-25-2009, 03:29 PM	#10
noxredna Captain 63 Rep 672 Posts Drives: E92 M3, E30 M3, 1M, F10 M5 Join Date: Sep 2008 Location: Singapore & San Fransisco iTrader: (0)	weight? When are the other finishes going to be released? pre-orders?
	Appreciate 0 Quote

02-25-2009, 03:49 PM	#11
gthirtyfizle Colonel 191 Rep 2,867 Posts Drives: E92 M3 AW Join Date: Jul 2008 Location: NYC iTrader: (4)	Its a good looking wheel but for some reason something just doesnt look right
	Appreciate 0 Quote

02-25-2009, 09:37 PM	#13
boostedtwin Sheriff 109 Rep 1,481 Posts Drives: spyder, Macan GTS, 4xe Rubicon Join Date: Mar 2007 Location: Orlando iTrader: (10) Garage List 07 335i [0.00] 07 335i [0.00]	20's x 10 or 10.5 with an aggressive offset and this will be a hit. __________________ 2023 Porsche Spyder, 2024 Porsche Macan GTS, 4Xe Rubicon & 2021 BMW X5 M Package
	Appreciate 0 Quote

02-25-2009, 10:34 PM	#14
nmulax Brigadier General 378 Rep 4,320 Posts Drives: '07 Z4 M Coupe Join Date: May 2006 Location: Metro-Detroit iTrader: (5) Garage List 2007 Z4M Coupé [7.66]	So if they fit the E46 M3, should be good for the Z4M coupe too right? Powdercoated black, and I think I have my next wheel. __________________
	Appreciate 0 Quote

02-25-2009, 11:08 PM	#15
positiveions Lieutenant General 961 Rep 11,722 Posts Drives: 19 Tacoma, 16 Golf wagon Join Date: Sep 2007 Location: Upland, CA iTrader: (2) Garage List 2019 Toyota Tacoma [0.00] 2016 VW Golf Sports ... [0.00] 1998 BMW M3 [0.00] 1990 BMW 325is [0.00]	nice nice. yepe yepe. i approve
	Appreciate 0 Quote

02-26-2009, 12:24 PM	#16
bigjae1976 Major General 1570 Rep 8,075 Posts Drives: 11 E90 M3 Individual Join Date: Mar 2006 Location: Houston, TX iTrader: (22) Garage List 2004 BMW M3 [4.50] 2011 BMW E90 M3 [5.25] 2013 BMW 328i [5.00]	YES! Hopefully, they'll come out with a 19x10.5 rear fitment! __________________ 2018 F30 320iX Melbourne Red 2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue
	Appreciate 0 Quote

02-27-2009, 01:07 AM	#17
nvk Private 0 Rep 68 Posts Drives: 2003 Ford Mondeo Join Date: Sep 2008 Location: New Delhi, India iTrader: (0)	Nice! That looks awesome __________________ Previous rides: 1999 Yamaha R6 1996 Audi A4 2000 Audi A4 1.8tqm 2003 BMW M3 w/SMG
	Appreciate 0 Quote

02-27-2009, 02:54 AM	#18
EOE90 Colonel 129 Rep 2,429 Posts Drives: F15 Join Date: Mar 2006 Location: Laker City iTrader: (0) Garage List 2006 3 [0.00]	please make both these and the v710 in 20 inch, pretty pretty please __________________ E90 M3 -> F15 X5 M-Sport
	Appreciate 0 Quote

02-27-2009, 07:23 PM	#20
chompino First Lieutenant 50 Rep 372 Posts Drives: 08 AW M3 Join Date: Apr 2006 Location: Santa Monica, CA iTrader: (0) Garage List 2008 M3 [0.00]	These wheels look great! __________________
	Appreciate 0 Quote

02-27-2009, 10:36 PM	#22
michaeldorian Major 238 Rep 1,125 Posts Drives: M2 CS Join Date: Jan 2008 Location: Currently North Carolina iTrader: (0)	Wow. Nice job. Excellent design.
	Appreciate 0 Quote