" \\\M " laser engrave on tips (performance style)

[OMRITIME]

hi
i just ordered from eas the 80 mm tips for the oem exhaust
ive been playing with the idea of engrave the m logo
on the tips like the performance exhaust
i did some research and found someone who can do it for me
my only problem is i need to send him the logo as pdf file
and give him dimensions
this is close up pics
if anyone can chime in.....


*i know some of u guys may think its ricy or wannabe but
i dont mind to check it and see how it will look

thanks

[ProdigyM]

i like it, because its not over the top, i say go for it.

[OMRITIME]

Somone can help with that PDF logo?

[OMRITIME]

Update

I manage to make the logo
And have Someone that engrave on the tips.
Anyone can help me with the size of the logo on the tips???

Here is the logo

[Semi-Poor]

I am sure someone in China can help you. I will not. Buy the MPE if you want the logo otherwise leave it blank.

[1SerieStud]

Originally Posted by OMRITIME

Update

I manage to make the logo
And have Someone that engrave on the tips.
Anyone can help me with the size of the logo on the tips???

Here is the logo

I just received my M performance exhaust 2 days ago. I'll take some measurements for you...stay tuned.

[OMRITIME]

Originally Posted by 1SerieStud

I just received my M performance exhaust 2 days ago. I'll take some measurements for you...stay tuned.

thanks
im waiting

[1SerieStud]

Originally Posted by OMRITIME

thanks
im waiting

35mm wide by 10mm high. I put a transparent plastic bag over it and marked the corners (since the emblem is curved), then on a flat surface took the measurements.

[1SerieStud]

By the way, the width I measured at the bottom (widest part of the emblem), and the height I measured on the right hand side of the emblem (the last leg of the letter M since it provides a straight vertical edge). Just make sure everything else remains proportionate.

[OMRITIME]

Originally Posted by 1SerieStud

By the way, the width I measured at the bottom (widest part of the emblem), and the height I measured on the right hand side of the emblem (the last leg of the letter M since it provides a straight vertical edge). Just make sure everything else remains proportionate.

great
many thanks
will post pics soon

[1SerieStud]

Originally Posted by OMRITIME

great
many thanks
will post pics soon

You're welcome! Let me know how it goes. I'm slapping my exhaust on this weekend. While the exhaust is off you may want to do the perforated pipes mod (it will make it sound close to the M performance exhaust) - I was going to do this but then the opportunity to buy an M performance exhaust presented itself.

By the way, I should have checked while I was home for lunch, but I believe the M tips are larger in diameter, so I'm curious as to how the engraving will look on the smaller tips? I'm assuming you're not going to scale them down? The easy way to do it would be to calculate the sticker dimension to tip diameter ratio, and scale down the sticker accordingly for the regular exhaust tips.

[OMRITIME]

Originally Posted by 1SerieStud

You're welcome! Let me know how it goes. I'm slapping my exhaust on this weekend. While the exhaust is off you may want to do the perforated pipes mod (it will make it sound close to the M performance exhaust) - I was going to do this but then the opportunity to buy an M performance exhaust presented itself.

By the way, I should have checked while I was home for lunch, but I believe the M tips are larger in diameter, so I'm curious as to how the engraving will look on the smaller tips? I'm assuming you're not going to scale them down? The easy way to do it would be to calculate the sticker dimension to tip diameter ratio, and scale down the sticker accordingly for the regular exhaust tips.

exhaust mod will be great
but i'm running test pipe
and everyone here told me that combo will rasp
and i hate that raspiness
so i thought i leave it until i find good deal on akra or mpe

about the tips
i made now blank paper cuted to the size 10X35
and tape it to the tip
it looks a bit small to me but idk
i think i will do some test before engrave on it and than will see

[1SerieStud]

Originally Posted by OMRITIME

exhaust mod will be great
but i'm running test pipe
and everyone here told me that combo will rasp
and i hate that raspiness
so i thought i leave it until i find good deal on akra or mpe

about the tips
i made now blank paper cuted to the size 10X35
and tape it to the tip
it looks a bit small to me but idk
i think i will do some test before engrave on it and than will see

Small? Those are the measurements right off one of the tips of my MPE. The logo isn't as big as most people envision, it's rather small compared to the tips...I guess once engraved, since they curve, they may look better, as you would expect. I actually thought they would look slightly big on what I think are smaller tips, but I could be wrong and they may be the same size.

[Semi-Poor]

[OMRITIME]

Originally Posted by Semi-Poor

Please...
go f**k yourself somewhere else

If u don't like what I'm trying to do fine by me
But don't spam with your worthless posts

[mPlasticDesign]

Originally Posted by OMRITIME

....so i thought i leave it until i find good deal on akra or mpe.....

Can't beat $2,200 shipped US48!

http://www.m3post.com/forums/showthread.php?t=989482

[OMRITIME]

Originally Posted by Mr.Metak2you

Can't beat $2,200 shipped US48!

http://www.m3post.com/forums/showthread.php?t=989482

I wish
I'm living in israel and the shipping price is the problem....
Good luck

[Semi-Poor]

Originally Posted by OMRITIME

Please...
go f**k yourself somewhere else

If u don't like what I'm trying to do fine by me
But don't spam with your worthless posts

Not worthless you steal what others pay for so right back at you. I am done enjoy.

[1SerieStud]

Originally Posted by Mr.Metak2you

Can't beat $2,200 shipped US48!

http://www.m3post.com/forums/showthread.php?t=989482

Heck of a deal...I just paid $50 more for one that only has a total of 80 miles on it

Someone should jump on this!!

[mPlasticDesign]

Originally Posted by 1SerieStud

Heck of a deal...I just paid $50 more for one that only has a total of 80 miles on it

Someone should jump on this!!

Thanks.

[Mdriv3r]

Eisenmann

[OMRITIME]

Originally Posted by premo

Eisenmann

They will not rasp paired with the test pipe?

I heard dinan cat back
Also can do the work