|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
03-29-2013, 12:52 PM | #1 |
Private
18
Rep 96
Posts |
PSS fitment help!
Hi Everyone,
I'm hoping you can help me out. I have 19" Morr's Front Et 20 Back Et 22 Lowered on H&R springs I have 10mm spacers on the front 8mm on the back. I was running Coniti's DW 245/35/19 and 275/35/19 with no rubbing but I want to get the PSS's. But will PSS 255/35/19 front and 275/35/19's rub with this setup? Thanks for your help! Last edited by bzoo; 03-29-2013 at 01:05 PM.. |
03-29-2013, 06:08 PM | #4 |
First Lieutenant
27
Rep 313
Posts |
I have Morr wheels myself and tried this very tire setup. The front PSS in 255/35 rubbed slightly when the wheel was turned approximately 1/3 - 1/2. I am not currently lowered, so I'm not sure if lowered would be different. I was lucky that the local Discount Tire was willing to order both 245 and 255 sizes, and try the larger first and test it in the bay before going back to 245s. Since you are also using spacers, I think it will rub more.
|
Appreciate
0
|
03-29-2013, 06:57 PM | #5 |
Colonel
84
Rep 2,792
Posts |
A 255/35 will rub when you turn the wheel as mentioned above. It's very slight though. Once the tire and fender liner wore down, mine doesn't do it anymore.
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|