|
|
10-04-2013, 01:48 PM | #309 | |
Second Lieutenant
18
Rep 293
Posts |
Quote:
I was thinking 245/285 or 255/295 but again they're very agressive. |
|
Appreciate
0
|
10-04-2013, 01:59 PM | #310 |
Major General
2739
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
I would absolutely run 275's on your fronts if they are 10". I have 275's on my 10" fronts et18 without any rubbing (none at full lock, none on dips in the road). My tire is a few mm away from my coilovers on the inside and perfect in relation to the outer fender. I have just under 2 degrees of negative camber. A 275 in the front is a much better match to a 295 in the rear. Running 245 or 255 in the front will just add understeer plus too much of a stretch on a 10" wide wheel.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
10-04-2013, 06:20 PM | #311 |
Captain
230
Rep 646
Posts
Drives: IG: khanhdom
Join Date: Dec 2011
Location: Houston, TX
|
hey guys, just got m3 last week. Looking for some wheels now, and I was wondering, if you guys can tell me how this would fit on our e92 m3? Going through the thread now also. BTW I have KW V3 coils also
http://www.m3post.com/forums/showthread.php?t=896748 18x10.5 +15 18x12 +22 Rears ( Hankook 245/35/18 and 285/30/18 |
Appreciate
0
|
10-07-2013, 10:12 PM | #312 | |
Captain
206
Rep 836
Posts |
Quote:
|
|
Appreciate
0
|
10-07-2013, 10:25 PM | #313 | |
Lieutenant Colonel
163
Rep 1,790
Posts |
Quote:
Your wheels are just SEXY!! I know what I want now instead of saving up for BBS's that I would cry if I curb rashed.. (Love at first site)
__________________
Stupid Photobucket
|
|
Appreciate
0
|
10-23-2013, 08:42 PM | #314 |
Crazy!
1180
Rep 1,440
Posts |
I am trying to figure out the most agressively fitted e92/93 M3 out there.. with fender mods i mean with poke and stretch.. if there is any..
My friend did 20x10+18 and 20x11+11 with light rear fender mods. I have seen a 19x12 in the rear..with minor mods to rear too but i still think there is rooom for more than that. I have a set of Leon Hadiritt Ordens at 19x10/19x12 with negative offsets, i dream of fitting on my car after i redrill the holes..I am not afraid of cutting and modifying the rear and adding camber if necessary Exhibit a: This is 20x10 20x11.5 unknown offset but you can tel there is poke. this is probably the most agressive I have seen next to my friends...I think it would look much better if he flattened and pulled his rear fender about a 1/4 or 1/2 inch.... ....any one seen more agressive mayeb with a pull and modified fenders? Last edited by GabeS; 10-23-2013 at 08:55 PM.. |
Appreciate
0
|
10-24-2013, 12:06 AM | #315 |
First Lieutenant
38
Rep 303
Posts |
Here are some photos of my 2011 sedan on Volk TE37SL's
Front: 19x9.5 et +22 and a 12.5mm spacer to make et +9.5 245/35/r19 Rear: 19x10.5 et +22 no spacer 295/30/r19 Only get a little bit of rub over bumps in the rear with passengers. DSC_0056-Edit by ARO6ANT, on Flickr DSC_0037-Edit by ARO6ANT, on Flickr DSC_0024-Edit by ARO6ANT, on Flickr DSC_0023-Edit by ARO6ANT, on Flickr DSC_0014-Edit by ARO6ANT, on Flickr DSC_0008-Edit by ARO6ANT, on Flickr DSC_0006-Edit by ARO6ANT, on Flickr |
Appreciate
0
|
10-24-2013, 05:07 PM | #317 |
BimmerPost Supporting Vendor
733
Rep 10,105
Posts |
|
Appreciate
0
|
10-30-2013, 10:50 PM | #318 | |
Second Lieutenant
18
Rep 293
Posts |
Quote:
In the front even with KW clubsports (linear springs) are about 1-2mm away from hitting the wheel, so I need a 5mm spacer up front. Luckily for me, I have the macht schnell bullet tip studs to install, so spacer is no issue. Rears are going to need some fender love to fit the 285/30 outside, and inside just some trimming to the plastic liner. The rear has plenty of inner strut clearance. Ideally I didn't want to go with too much stretch, but also wanted to fit a big wheel. I did 245/35/19 up front on 10" and 285/30/19 on 12". The stretch is almost identical and sidewall heights are spot on (F 85.75mm R 85.5mm) In my perfect world I would have loved a 295/30 rear but I also wanted to build a wheel wider then most (Thanks for all the help SERG!!!) and have a 5.5" rear lip. More pics coming soon. Last edited by little_meech; 10-30-2013 at 11:00 PM.. |
|
Appreciate
0
|
10-31-2013, 07:22 AM | #319 | |
BimmerPost Supporting Vendor
733
Rep 10,105
Posts |
Quote:
Quote:
|
|
Appreciate
0
|
10-31-2013, 03:39 PM | #321 | |
Crazy!
1180
Rep 1,440
Posts |
Quote:
my outers are 6.5" and inners 5.5" so I gain 1 " of inner clearance, at the same time your disk seems to be mid disk? or is it hi? mine is low, it's like the part that hits the hub is flat with the spokes, so Io also gain outer clearance, it was a custom wheel build, for another car/S14 but I have a light feeling I can make the rear work with some tlc...then again if I cant I am more then rear to cut up the metal and flare them out very nicely... like the VIP guys do.. the fronts are what worries me.. ahahha |
|
Appreciate
0
|
10-31-2013, 09:38 PM | #322 |
Second Lieutenant
18
Rep 293
Posts |
What size fronts do you want to run?
The problem in the rear would not be inner clearance, it would be outter. Id say in negative offset you will stick out past the body 1.5 to 2" lol Liberty walk cars run negative offset 12" rear. I have a pic of my 12 +25 and thats poking quite a bit in the rear. Also keep in mind you need to clear the brakes too. Leon orditt wheel has a flat face so idk how well thats going to work with the brake clearance. I had these wheels built in mind to clear the brakes. Last edited by little_meech; 10-31-2013 at 09:43 PM.. |
Appreciate
0
|
11-01-2013, 02:58 PM | #323 |
Crazy!
1180
Rep 1,440
Posts |
10.5 fronts,super neg offset.. ill do another test fit this week.
yeah i gotta double check that they will clear the brakes. QUOTE=little_meech;14906169]What size fronts do you want to run? The problem in the rear would not be inner clearance, it would be outter. Id say in negative offset you will stick out past the body 1.5 to 2" lol Liberty walk cars run negative offset 12" rear. I have a pic of my 12 +25 and thats poking quite a bit in the rear. Also keep in mind you need to clear the brakes too. Leon orditt wheel has a flat face so idk how well thats going to work with the brake clearance. I had these wheels built in mind to clear the brakes.[/QUOTE]
__________________
First "real" widebody M3 ever thread.[url]http://www.m3post.com/forums/showthread.php?p=17461963
|
Appreciate
0
|
11-01-2013, 05:41 PM | #324 |
Second Lieutenant
18
Rep 293
Posts |
|
Appreciate
0
|
11-04-2013, 07:22 AM | #325 |
Second Lieutenant
18
Rep 293
Posts |
Here is a couple until my photoshoot is done. No rubbing at all. I max'd out the kw clubsports but i want to go lower, so im going to look into custom springs/aircups. 12" rear is max'd out. 1 pink gap on inner fender liner, and pokes in rear. Front i am convinced i can build a 10.5 +5 with a 255/35. Right now mine are 10" +10 but im adding mach schnell competition spacers for a little extra inner clearance. Lmk if anyone needs help! The numbers are dialed in to the t! |
Appreciate
0
|
11-04-2013, 10:08 AM | #326 | |
First Lieutenant
38
Rep 303
Posts |
Quote:
|
|
Appreciate
0
|
11-04-2013, 10:40 AM | #327 |
Second Lieutenant
18
Rep 293
Posts |
Thanks! Ill report back monday after alignment. I didnt touch any arms in rear and left the kw clubsport plates even, so it's "natural" camber right now.
19x10 +5 245/35/19 nitto invo 19x12 +25 285/30/19 nitto invo I didnt touch the rear quarters at all. Im so pumped that bmw manufacturers the cars with flat fender lips and widened rear bumpers with no exposed tabs. This car was easy to fit lol |
Appreciate
0
|
11-04-2013, 05:43 PM | #328 | |
Crazy!
1180
Rep 1,440
Posts |
Wow, it looks amazing ..super good job.
Quote:
__________________
First "real" widebody M3 ever thread.[url]http://www.m3post.com/forums/showthread.php?p=17461963
|
|
Appreciate
0
|
11-05-2013, 04:55 PM | #330 | |
Private First Class
6
Rep 197
Posts |
Quote:
Last edited by SUBFRAMERIPPER; 11-05-2013 at 04:56 PM.. Reason: edit text |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|