Interior LED dome/map lights error, Please help

[werly]

I just recently purchased a set of interior LEDs, and everything works fine besides the front dome/map lights.

I believe other members experienced the same issue but it ended without a solution. So here I am again...

I installed the kit and after driving for couple days I discovered that the front map/dome lights will not work after driving for a random period of time (that sounds odd but it is happening to me)

After restarting the engine the front map/dome lights work
again. Then, the front dome/map lights have no response again by pushing the buttons while driving for a extended moment (most likely 5 mins)

Basically they are repeating the cycle: not working while driving for
5 mins --> work again after restarting engine --> not working while
driving for 5 mins

I checked the connection of the front map/dome lights to make sure
they are firmly in place and yes they all are.

I switched back the OEM bulbs and the front map/dome lights work just
fine with any error even when driving.

Could it be the design of the bulb? Or other issues that cause this error?

[THE TECH]

Interesting. When I installed my kit, the map lights worked fine. I have yet to actually try to use them while driving though. Guess I should see if I have any similar issues.

[werly]

Originally Posted by THE TECH

Interesting. When I installed my kit, the map lights worked fine. I have yet to actually try to use them while driving though. Guess I should see if I have any similar issues.

When the car is not moving the lights work well; the problem surfaces during drive but not all the time. I will say about 70% of the time when I try to push the buttons and they will not respond. 70% is enough to bother me

[werly]

Originally Posted by THE TECH

Interesting. When I installed my kit, the map lights worked fine. I have yet to actually try to use them while driving though. Guess I should see if I have any similar issues.

Did you get to try yours? How are they behaving?

[THE TECH]

Originally Posted by werly

Did you get to try yours? How are they behaving?

I did try briefly and there were no issues, but I haven't had a chance to try for a longer period yet.

[THE TECH]

FYI, I tried leaving the map light on while driving last night and it never turned off. Had it on for 10 mins straight.

[Dynamico]

Anyone found a solution for this problem? I am getting the same thing...

[BIGW0RM]

Originally Posted by Dynamico

Anyone found a solution for this problem? I am getting the same thing...

Yea, you need canbus style LED lights. Whatever you have is probably not canbus style.