Mode Carbon GTS Lip: V1 or V2?

[tbone28]

I've installed the Mode Carbon V1 GTS lip. I also have the splitter that goes underneath to make it a V2.

Place your vote: Keep it a V1, or turn it into a V2?

V1






V2

[W///]

V1 for me. I prefer lips that don't stick too far out to the front. Not to mention V1 is probably more practical and less likely to get destroyed.

[Grail05]

i like the V1 unless you go GT4 ;(

but if the extension goes out more then ill make pull it out as far as i can shouldnt be that bad.

[IND-Distribution]

Not voting till you wash those beautiful wheels.

I say V1

[foam]

I'd say V2 so that it protects the upper lip on the bottom

[M3ANMACHINE]

Originally Posted by foam

I'd say V2 so that it protects the upper lip on the bottom

this.

[chich]

I run the V1 and love it. It looks a little cleaner than the V2 IMO. Either one would look good on your car though

[tbone28]

Originally Posted by W///

V1 for me. I prefer lips that don't stick too far out to the front. Not to mention V1 is probably more practical and less likely to get destroyed.

To play devil's advocate, the splitter would protect the V1. If the spliiter gets damaged, V1 still pristine.

Originally Posted by Sean05

i like the V1 unless you go GT4 ;(

but if the extension goes out more then ill make pull it out as far as i can shouldnt be that bad.

GT4 would be too low for my car I think. In the pic I posted, the splitter should come out a bit more. I didn't line it up well. You can see how the ends of the lip and splitter aren't lined up. Never thought about pulling it out even further though. Wonder how that'd look...

Originally Posted by Jesal@IND

Not voting till you wash those beautiful wheels.

I say V1

I hear ya buddy

Originally Posted by foam

I'd say V2 so that it protects the upper lip on the bottom

Yeah that's what Sam@ModeCarbon was telling me. Hey, are you still interested in my arkym lip?

Originally Posted by M3ANMACHINE

this.

Yeah, good point. The V1 does sit lower than the arkym lip I previously ran.

Originally Posted by chich

I run the V1 and love it. It looks a little cleaner than the V2 IMO. Either one would look good on your car though

I do like how clean the V1 looks, but also like how the V2 makes it look a bit more aggressive. #1stWorldProblems

[dozaiya]

v1, looks way cleaner

[slicer]

V2

[MRG Race Co]

Tbone doing polls??? I know you already know what you want so no need to ask all of these people who's opinions are useless 😜 ...

[tbone28]

haha, you know me well. Yes, I'll ultimately decide on my own, but am curious what others think. You know, sometimes others spin an angle you've never considered

[e92livin]

V2

[Exclusivs]

V1

[Blindside_137]

V1

[Sebringjetta]

Originally Posted by e92livin

V2

[Detroit M3]

both

[M3-S65]

V1 looks like a OEM BMW part. Clean and complete.
V2 not feelin the gap between the two, looks too busy.
Stick with the V1...

[tbone28]

To be fair to Mode Carbon, the gap you see in the V2 pics is due to the spliiter being held in place by just the blue tape.

[dozaiya]

the only dual lip that looks good is the gts lip

[emac08]

V1