Oil separator block off and catch can brackets

Vedubin01 · 08-27-2022, 07:17 AM

BIMMERPOST / Classifieds

Asking Price:

USD 400.00

Shipping Costs Included

Item Interest

Hello everyone, if you have been following my thread in the general section I have been working on a catch can system for the s65 NA and Boosted cars. The prototype is complete and is fully functional and ready to go into production for a limited run. I have a pre sale going that will end Sept 16th. They are $400 shipped to your door, lower 48. If you are interested feel free to PM me and we can discuss further. I'm only doing a limited run and that will be it.

Vedubin01 · 09-01-2022, 01:15 PM

Have already started production on the block off plates. We are so far 2.5 weeks ahead. Once presale closes you will have to pre drill brackets to fit your catch can. Hit me up if you have questions. Pre sale closes sept 16 2022.

DrFerry · 09-01-2022, 01:40 PM

An engineering labor of love, AND a work of art! Well done Vedubin01 I'm thinking demand may require more than a limited run. Great job. Are the Nuke-Performance catch can and braided lines included?

Vedubin01 · 09-01-2022, 02:26 PM

Quote:

Originally Posted by DrFerry

An engineering labor of love, AND a work of art! Well done Vedubin01 I'm thinking demand may require more than a limited run. Great job. Are the Nuke-Performance catch can and braided lines included?

No the Nuke Performance Carbon can runs anywhere from $258-300 depending on where you look for it. I'm not a business and can't see up charging on parts you can find yourself. Like AN fitting etc are on the buyer. But will provide list of parts needed either NA or boosted

Zero Signal · 09-15-2022, 05:33 PM

What all is included?

Vedubin01 · 09-15-2022, 06:26 PM

Quote:

Originally Posted by Zero Signal

What all is included?

The 2 block off plates and relocation bracket that holds the catch can and the bracket for the ESS supercharger to move the coolant reservoir closer to the plenum. Working with a company to help provide a discount for all other parts. Well known company with great feed back. Pre sale closes tomorrow. Message me for more info

MaximusB · 09-16-2022, 12:58 AM

I’m interested, but have a few questions:

- does it include the plugs to close off the ports on the plenum?
- how is it plumbed? Both valve covers goes to one catch can?
- is the bracket only made to fit that particular catch can? Can I use a different catch can, such as the radium engineering catch can?

Thanks

Vedubin01 · 09-16-2022, 07:31 AM

Pm sent

maestrodevil · 09-16-2022, 12:20 PM

Quote:

Originally Posted by Vedubin01

Hello everyone, if you have been following my thread in the general section I have been working on a catch can system for the s65 NA and Boosted cars. The prototype is complete and is fully functional and ready to go into production for a limited run. I have a pre sale going that will end Sept 16th. They are $400 shipped to your door, lower 48. If you are interested feel free to PM me and we can discuss further. I'm only doing a limited run and that will be it.

Hi, I'm new to working on cars, and was wondering if you have a video or something about this? What's included, how to install, and how it helps? Thanks!

Vedubin01 · 09-16-2022, 07:14 PM

Quote:

Originally Posted by maestrodevil

Quote:

Originally Posted by Vedubin01

Hello everyone, if you have been following my thread in the general section I have been working on a catch can system for the s65 NA and Boosted cars. The prototype is complete and is fully functional and ready to go into production for a limited run. I have a pre sale going that will end Sept 16th. They are $400 shipped to your door, lower 48. If you are interested feel free to PM me and we can discuss further. I'm only doing a limited run and that will be it.

Hi, I'm new to working on cars, and was wondering if you have a video or something about this? What's included, how to install, and how it helps? Thanks!

The pre sale closes today then we go into production on Monday. I've documented the build in the general section. You can search by my name. Once the kits are produced I'm sure you will see several posts of their installs. Any questions feel free to ask

Zero Signal · 09-17-2022, 11:18 AM

You box is full

Vedubin01 · 09-17-2022, 01:27 PM

Quote:

Originally Posted by Zero Signal

You box is full

Fixing that now.

tlrid3r · 09-20-2022, 10:17 PM

Quick question how is the ports under the intake plenum gets sorted if they no longer fit into the factory oil separator.

amrazM · 09-21-2022, 05:04 AM

Quote:

Originally Posted by tlrid3r

Quick question how is the ports under the intake plenum gets sorted if they no longer fit into the factory oil separator.

They get capped off, the port is just there to recirc what comes out of the oil seperators.

Vedubin01 · 09-21-2022, 08:58 AM

Quote:

Originally Posted by tlrid3r

Quick question how is the ports under the intake plenum gets sorted if they no longer fit into the factory oil separator.

I did the caps in red just for visualization but like stated they are just capped off.

Vedubin01 · 09-21-2022, 02:51 PM

For you supercharged guys this one is for you

Vedubin01 · 10-23-2022, 05:27 PM

Updating this as both supercharged and NA kits have been fully tested and validated. Feel free to DM with questions.

patroklai · 10-27-2022, 08:40 PM

Slick kit!

08-27-2022, 07:17 AM	#1
Vedubin01 Banned 943 Rep 635 Posts Drives: 2013 E92 M3 Join Date: Dec 2019 Location: Orlando iTrader: (0)	Oil separator block off and catch can brackets BIMMERPOST / Classifieds Asking Price: USD 400.00 Shipping Costs Included Item Interest Hello everyone, if you have been following my thread in the general section I have been working on a catch can system for the s65 NA and Boosted cars. The prototype is complete and is fully functional and ready to go into production for a limited run. I have a pre sale going that will end Sept 16th. They are $400 shipped to your door, lower 48. If you are interested feel free to PM me and we can discuss further. I'm only doing a limited run and that will be it. Attached Images
	Appreciate 1 DrFerry6728.50 Tweet Quote

09-01-2022, 01:15 PM	#2
Vedubin01 Banned 943 Rep 635 Posts Drives: 2013 E92 M3 Join Date: Dec 2019 Location: Orlando iTrader: (0)	Have already started production on the block off plates. We are so far 2.5 weeks ahead. Once presale closes you will have to pre drill brackets to fit your catch can. Hit me up if you have questions. Pre sale closes sept 16 2022.
	Appreciate 0 Quote

09-01-2022, 01:40 PM	#3
DrFerry Field Marshal 6729 Rep 1,829 Posts Drives: '08 E92 M3 Join Date: Jul 2010 Location: Greenville, SC iTrader: (5) Garage List 2008 BMW M3 [5.25] 2015 BMW X5 [4.50]	An engineering labor of love, AND a work of art! Well done Vedubin01 I'm thinking demand may require more than a limited run. Great job. Are the Nuke-Performance catch can and braided lines included? __________________ '08 E92 M3 DCT Melbourne Red/Bamboo Beige Leather/EDC/SSP Spec-R DCT clutch discs/SSP Pro-Gold DCT Fluid/Quaife LSD/3:45 Final Drive by Diffs Online/BE Bearings & ARP Bolts/Vibra Technics Engine Mounts/M3 World HFC X-Pipe/LUX H8 180/BPM Sport DCT Tune/PFC Z-Rated Pads/ECS Brass Brake Caliper Bushings/Alex Shop Solid Sub-frame Bushings/Motul 600/Tint
	Appreciate 1 ///M Power-Belgium63358.00 Quote

09-15-2022, 05:33 PM	#5
Zero Signal Enlisted Member 12 Rep 38 Posts Drives: E90 M3 Join Date: Dec 2018 Location: DFW iTrader: (0)	What all is included?
	Appreciate 0 Quote

09-16-2022, 12:58 AM	#7
MaximusB Major 1394 Rep 1,292 Posts Drives: 13 Frozen White E92 Join Date: Apr 2016 Location: Vancouver iTrader: (0)	I’m interested, but have a few questions: - does it include the plugs to close off the ports on the plenum? - how is it plumbed? Both valve covers goes to one catch can? - is the bracket only made to fit that particular catch can? Can I use a different catch can, such as the radium engineering catch can? Thanks
	Appreciate 0 Quote

09-16-2022, 07:31 AM	#8
Vedubin01 Banned 943 Rep 635 Posts Drives: 2013 E92 M3 Join Date: Dec 2019 Location: Orlando iTrader: (0)	Pm sent
	Appreciate 0 Quote

09-17-2022, 11:18 AM	#11
Zero Signal Enlisted Member 12 Rep 38 Posts Drives: E90 M3 Join Date: Dec 2018 Location: DFW iTrader: (0)	You box is full
	Appreciate 0 Quote

09-20-2022, 10:17 PM	#13
tlrid3r just another M3 514 Rep 1,150 Posts Drives: e92 M3 Join Date: Dec 2007 Location: San Jose, ca iTrader: (6)	Quick question how is the ports under the intake plenum gets sorted if they no longer fit into the factory oil separator. __________________ ///M3... Don't want more power, Just want it to turn sharper one step closer each time. -Ohlins TTX Raceline, PolePostions seats, Akrapovic EVO, ARC-8, 1/2 Cage, Seat Delete, Stoptech BBK, solid Subframe and diff bushing, spherical bearing on everything.
	Appreciate 0 Quote

09-21-2022, 02:51 PM	#16
Vedubin01 Banned 943 Rep 635 Posts Drives: 2013 E92 M3 Join Date: Dec 2019 Location: Orlando iTrader: (0)	For you supercharged guys this one is for you Attached Images
	Appreciate 0 Quote

10-23-2022, 05:27 PM	#17
Vedubin01 Banned 943 Rep 635 Posts Drives: 2013 E92 M3 Join Date: Dec 2019 Location: Orlando iTrader: (0)	Updating this as both supercharged and NA kits have been fully tested and validated. Feel free to DM with questions. Attached Images
	Appreciate 3 nwn5423.00 Frostynorth432.50 Pappas Fritas61.50 Quote

10-27-2022, 08:40 PM	#18
patroklai Major 222 Rep 1,254 Posts Drives: Camaro SS \| e92 M3 Join Date: Jul 2011 Location: STL iTrader: (10)	Slick kit!
	Appreciate 1 Vedubin01942.50 Quote