Sponsored by The Tire Rack

[little_meech]

Front poke bump. Lol

[GabeS]

Can you do me a big favor and tell me how much space you have from coilover strut to the top inner wheel lip?
so i can figure out if another half inch can be added on the inside...
and also at full lock front and back of the wheel well...how much free space is there? does it get near hitting the inner walls?
ordering a custom set of work meisters for my gf and trying to max out my usable space in there.

Originally Posted by little_meech

Here is a couple until my photoshoot is done. No rubbing at all. I max'd out the kw clubsports but i want to go lower, so im going to look into custom springs/aircups.

12" rear is max'd out. 1 pink gap on inner fender liner, and pokes in rear.

Front i am convinced i can build a 10.5 +5 with a 255/35. Right now mine are 10" +10 but im adding mach schnell competition spacers for a little extra inner clearance.

Lmk if anyone needs help! The numbers are dialed in to the t!

[little_meech]

Originally Posted by GabeS

Can you do me a big favor and tell me how much space you have from coilover strut to the top inner wheel lip?
so i can figure out if another half inch can be added on the inside...
and also at full lock front and back of the wheel well...how much free space is there? does it get near hitting the inner walls?
ordering a custom set of work meisters for my gf and trying to max out my usable space in there.

No inner rear clearance. Maybe a cc between bead on barrel to fender liner lol

And front?

Not a chance! Im like a hair away on inside and i have liner springs on my coil ers. Im pretty sure the 9.5" meister needs a 15mm spacer to clear the brakes

[GabeS]

bead on barrel to fender liner? on inside or outer? I am trying to figure out the inner clearance only... any pics of clearance between coil strut and rim ?
maybe one showing clearance when wheel is in neutral position and one in full lock ?

a lot of work but would really help...

like this please:::::

Originally Posted by little_meech

No inner rear clearance. Maybe a cc between bead on barrel to fender liner lol

And front?

Not a chance! Im like a hair away on inside and i have liner springs on my coil ers. Im pretty sure the 9.5" meister needs a 15mm spacer to clear the brakes

[little_meech]

What are the specs you are trying to fit? Tell me and ill say yes or no lol

Fyi i was speaking about inner clearance only since thats what you're asking about. You cant compare it unless you tell me what your running first lol

[little_meech]

Im all for helping man, just give me info.

[little_meech]

The rear wheel will not hit any suspension pieces! It will hit the front bubble fender liner on inner rear wheel well. Thats the part where i have a credit card gap lol

For fronts? If you run a higher offset then me in a 12" count on it hitting the spring

[GabeS]

I posted a picture of what i meant below...
I want to see what your avail space is with your specs..and see what i want to do from there, maybe an 11" up front, with different offset plus camber or even just different disk type would free up inner clearance...
btw what disk type are your fronts and rears?hi disk/low disk ?

Originally Posted by little_meech

What are the specs you are trying to fit? Tell me and ill say yes or no lol

Fyi i was speaking about inner clearance only since thats what you're asking about. You cant compare it unless you tell me what your running first lol

[GabeS]

Originally Posted by little_meech

The rear wheel will not hit any suspension pieces! It will hit the front bubble fender liner on inner rear wheel well. Thats the part where i have a credit card gap lol

For fronts? If you run a higher offset then me in a 12" count on it hitting the spring

Cool thats the type of info i wanted..


you said 12" above...?12" or 11"?


still a picture like i posted would probably be the first of its type for our chassis and would be cool to have to go off...

[little_meech]

I can try and take a pic of the rear. Problem is the part thats close is in fro t portion of rear wheel well. I will need it up on a lift to show you. This is the front

[GabeS]

Originally Posted by little_meech

I can try and take a pic of the rear. Problem is the part thats close is in fro t portion of rear wheel well. I will need it up on a lift to show you. This is the front

ok.. i wanted front mostly.. thanks much.. if your able to get a clearer one that shows the gap clearly that would be awesome.!!!

[little_meech]

Im telling you tho lol i know whats there. If i put a credit card in between it will stay. Lol im not kidding when i say there is no more inner clearance

My new wheels will be a 10.5 +0 in the front. Ill come out more and run a little more camber. Im only at -1.7 now

[GreeKon]

Originally Posted by little_meech

My new wheels will be a 10.5 +0 in the front.

You sick bastard. I love it. Lolzzzz

[Hai_Cheo]

heard you guys liked aggressive set ups....lol

ride height



and just parked

[little_meech]

Bmw besties!!!!

[Hai_Cheo]

Originally Posted by little_meech

Bmw besties!!!!

You my boii blue

[rev9k]

Originally Posted by Hai_Cheo

heard you guys liked aggressive set ups....lol

ride height



and just parked

looks good but needs bigger tires ASAP; looks soo tiny. Still don't get why you run the 225/255?? (correct if I wrong??). You can def fit bigger tires on there

[Hai_Cheo]

Originally Posted by rev9k

looks good but needs bigger tires ASAP; looks soo tiny. Still don't get why you run the 225/255?? (correct if I wrong??). You can def fit bigger tires on there

Im re-using the same tires as my last set, i really dont know how much bigger i can go in size and still be this low lol

[kbh]

Riding on KW coilovers and daily driver

[little_meech]

Are those 22's? They look big!!

[giancarlo214]

[giancarlo214]

http://s236.photobucket.com/albums/f...psd5c81c62.jpg