▀▄ eas | Macht Schnell

EAS · 09-27-2010, 01:17 PM

In order to give your BMW a much more aggressive stance while increasing handling, we offer our line of Macht Schnell Competition Spacer Kits.

Machined from 6061-T6 aerospace aluminum, these adapters are strong as well as lightweight to limit unsprung/reciprocating weight for maximum performance on or off the track. Spacer edges are also chamfered to allow for easy installation/removal if needed. After machining, the spacers are then anodized for additional strength, anti-corrosion & wear resistance.

Here is a recent article in European car:

-An additional online article in European car's Tech section:

http://www.europeancarweb.com/tech/e...gineering.html

-Macht Schnell spacer reference thread with photos and spec details:

http://www.m3post.com/forums/showthr...schnell+spacer

-Macht Schnell DIY on how to properly install spacers:

http://www.m3post.com/forums/showthread.php?t=272915

A wider track stance increases lateral stability as well as giving your BMW a much more aggressive appearance after installation. Spacers also are used to correct wheel gap normally seen on otherwise stock suspension setups, pushing the wheels outward - filling the fenders.

Included with our Competition Wheel Spacer Kits are a full set of extended lug bolts in black OEM finish. All wheel fasteners are hardened and tempered to strength class 10.9 or 10 according to DIN/ISO standard 898 and meet the statutory requirements of all countries - including the US.

Competition Wheel Spacer kit Features:
- Machined from 6061-T6 aerospace aluminum
- Chamfered edges allows installation & removal quick and easy
- Black anodized finish for additional strength and corrosion/wear resistance
- Improve handling by reducing body roll with a wider wheel base
- Included black extended-length corrosion-resistant wheel fasteners

Macht Schnell - Competition Wheel Spacer kit for BMW - 03mm
http://www.europeanautosource.com/pr...oducts_id=2197

Macht Schnell - Competition Wheel Spacer kit for BMW - 05mm
http://www.europeanautosource.com/pr...oducts_id=2198

Macht Schnell - Competition Wheel Spacer kit for BMW - 10mm
http://www.europeanautosource.com/pr...oducts_id=2199

Macht Schnell - Competition Wheel Spacer kit for BMW - 12mm
http://www.europeanautosource.com/pr...oducts_id=2200

Macht Schnell - Competition Wheel Spacer kit for BMW - 15mm
http://www.europeanautosource.com/pr...oducts_id=2201

Macht Schnell - Competition Wheel Spacer kit for BMW - 18mm
http://www.europeanautosource.com/pr...oducts_id=2202

Models Supported:
2008+ 1-series
1992+ 3-series, including M3 (e36, e46, e90, e92)
2004+ 5-series, including M5 (e60)
2005+ 6-series, including M6 (e63, e64)
2004+ X3 (e83)
2000+ X5 (e53, e70)
2003+ Z4, including M-Roadster/Coupe (e85)
2001-2003 Z8
1996-2002 Z3, including M-Roadster/Coupe

All sizes are currently in stock and available for immediate shipment.

crazycarl16 · 09-27-2010, 10:24 PM

Please PM recommended setup for stock 19s with stock suspension shipped to 20814. Thanks.

david @ eas · 09-28-2010, 11:06 AM

Quote:

Originally Posted by crazycarl16

Please PM recommended setup for stock 19s with stock suspension shipped to 20814. Thanks.

Sending you a PM.

EAS · 10-04-2010, 11:51 AM

Stock vs Macht Schnell 10mm spacer on a e92 M3.

Thanks for the orders!

CarbonAlpine · 10-12-2010, 05:19 PM

Also pm me your choice for 2011 m3 coupe with oem 19's and stock height. Also pm me about installing to prevent vibrations. And is alignment is needed after?

many thanks

EAS · 10-12-2010, 06:13 PM

Quote:

Originally Posted by CarbonAlpine

Also pm me your choice for 2011 m3 coupe with oem 19's and stock height. Also pm me about installing to prevent vibrations. And is alignment is needed after?

many thanks

PM sent

EAS · 10-13-2010, 02:17 PM

Which sizes do YOU need?

Plenty of spacers in stock and ready to ship!

TW0929 · 10-13-2010, 10:59 PM

please pm 2 sets of 20mm to 08904

thx

EAS · 10-14-2010, 11:41 AM

Quote:

Originally Posted by TW0929

please pm 2 sets of 20mm to 08904

thx

Sure, PM coming

EAS · 10-25-2010, 01:19 PM

All orders have been shipped. Enjoy your new aggressive stance!

david @ eas · 11-01-2010, 11:33 AM

Thanks for all the orders over the weekend guys. If you have any further questions, I'm here to help out!

EAS · 11-09-2010, 11:20 AM

All sizes are in stock and ready to ship!

gthirtyfizle · 11-09-2010, 12:48 PM

Do u guys sell 8mm?

EAS · 11-15-2010, 03:01 PM

Quote:

Originally Posted by gthirtyfizle

Do u guys sell 8mm?

Unfortunately we do not carry 8mm spacers.

Weekend orders have been shipped. Thanks for your support!

shane335i · 11-17-2010, 01:31 AM

Would love to get some info on what the recommended setup is for a stock 2011 M3 Coupe w/competition package is? I may also buy some wheels from you but would stick with the OEM size so the spacers should work before and after.
Thanks for any info!
-Shane

EAS · 11-17-2010, 11:31 AM

Quote:

Originally Posted by shane335i

Would love to get some info on what the recommended setup is for a stock 2011 M3 Coupe w/competition package is? I may also buy some wheels from you but would stick with the OEM size so the spacers should work before and after.
Thanks for any info!
-Shane

Hi Shane, I'll send you over a PM on the recommended setup for the ZCP

EAS · 11-19-2010, 01:06 PM

Many sizes in stock, give us a call if you want some Macht Schnell spacers!

EAS · 11-23-2010, 02:57 PM

All PMs have been replied!

edwin_jo · 11-30-2010, 07:45 PM

I am interested in getting spacers for my E92 M3 with Competition Package, what is the recommended size? Thank you.

Edwin

EAS · 12-01-2010, 06:43 PM

Quote:

Originally Posted by edwin_jo

I am interested in getting spacers for my E92 M3 with Competition Package, what is the recommended size? Thank you.

Edwin

Sending you a PM.

bsb · 12-04-2010, 02:51 PM

Hi David,

This is my very first post. What spacers would you recommend for a OEM 19 wheels and OEM PS2 tires and Dinan Stage 3 suspension for a 2008 E90. This is a daily driver and intend to do track and auto x next season.

Also for those seeking the safest setup for track use exceeding 125 mph are spacers really advised? And if so, what are the options for lock bolts instead of extended lugs?

Much thanks!

EAS · 12-06-2010, 11:47 AM

Quote:

Originally Posted by bsb

Hi David,

This is my very first post. What spacers would you recommend for a OEM 19 wheels and OEM PS2 tires and Dinan Stage 3 suspension for a 2008 E90. This is a daily driver and intend to do track and auto x next season.

Also for those seeking the safest setup for track use exceeding 125 mph are spacers really advised? And if so, what are the options for lock bolts instead of extended lugs?

Much thanks!

The most common setup for OEM wheels would be the 15mm and 12mm spacers, but the best way to ensure that the spacers will fit is to measure the clearance between the tire and the fender. There are people that are tracking with spacers on their cars, so there shouldn't be any problems as long as the spacers are installed correctly.

There is an option to purchase RAD lock bolts, which comes in a set of four, when you place the order for Macht Schnell spacers.

09-27-2010, 01:17 PM	#1
EAS BimmerPost Supporting Vendor 547 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	▀▄ eas \| Macht Schnell - Competition Wheel Spacer kits for BMW In order to give your BMW a much more aggressive stance while increasing handling, we offer our line of Macht Schnell Competition Spacer Kits. Machined from 6061-T6 aerospace aluminum, these adapters are strong as well as lightweight to limit unsprung/reciprocating weight for maximum performance on or off the track. Spacer edges are also chamfered to allow for easy installation/removal if needed. After machining, the spacers are then anodized for additional strength, anti-corrosion & wear resistance. Here is a recent article in European car: -An additional online article in European car's Tech section: http://www.europeancarweb.com/tech/e...gineering.html -Macht Schnell spacer reference thread with photos and spec details: http://www.m3post.com/forums/showthr...schnell+spacer -Macht Schnell DIY on how to properly install spacers: http://www.m3post.com/forums/showthread.php?t=272915 A wider track stance increases lateral stability as well as giving your BMW a much more aggressive appearance after installation. Spacers also are used to correct wheel gap normally seen on otherwise stock suspension setups, pushing the wheels outward - filling the fenders. Included with our Competition Wheel Spacer Kits are a full set of extended lug bolts in black OEM finish. All wheel fasteners are hardened and tempered to strength class 10.9 or 10 according to DIN/ISO standard 898 and meet the statutory requirements of all countries - including the US. Competition Wheel Spacer kit Features: - Machined from 6061-T6 aerospace aluminum - Chamfered edges allows installation & removal quick and easy - Black anodized finish for additional strength and corrosion/wear resistance - Improve handling by reducing body roll with a wider wheel base - Included black extended-length corrosion-resistant wheel fasteners Macht Schnell - Competition Wheel Spacer kit for BMW - 03mm http://www.europeanautosource.com/pr...oducts_id=2197 Macht Schnell - Competition Wheel Spacer kit for BMW - 05mm http://www.europeanautosource.com/pr...oducts_id=2198 Macht Schnell - Competition Wheel Spacer kit for BMW - 10mm http://www.europeanautosource.com/pr...oducts_id=2199 Macht Schnell - Competition Wheel Spacer kit for BMW - 12mm http://www.europeanautosource.com/pr...oducts_id=2200 Macht Schnell - Competition Wheel Spacer kit for BMW - 15mm http://www.europeanautosource.com/pr...oducts_id=2201 Macht Schnell - Competition Wheel Spacer kit for BMW - 18mm http://www.europeanautosource.com/pr...oducts_id=2202 Models Supported: 2008+ 1-series 1992+ 3-series, including M3 (e36, e46, e90, e92) 2004+ 5-series, including M5 (e60) 2005+ 6-series, including M6 (e63, e64) 2004+ X3 (e83) 2000+ X5 (e53, e70) 2003+ Z4, including M-Roadster/Coupe (e85) 2001-2003 Z8 1996-2002 Z3, including M-Roadster/Coupe All sizes are currently in stock and available for immediate shipment.
	Appreciate 0 Tweet Quote

09-27-2010, 10:24 PM	#2
crazycarl16 Second Lieutenant 15 Rep 270 Posts Drives: 18 X5M // 08 X5 4.8i // 03 M5 Join Date: May 2010 Location: Bethesda, MD iTrader: (1)	Please PM recommended setup for stock 19s with stock suspension shipped to 20814. Thanks. __________________ 18 Alpine White F85 X5M // 03 Titanium Silver E39 M5 // 13 White Porsche 991 911 Carrera (Gone but not forgotten) 15 Mineral White Metallic F15 X5 XDrive50i M Sport // 09 Melbourne Red E92 M3 // 08 Space Gray E70 X5 4.8i // 07 Black Sapphire Metallic E86 Z4 M Coupe
	Appreciate 0 Quote

10-04-2010, 11:51 AM	#4
EAS BimmerPost Supporting Vendor 547 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	Stock vs Macht Schnell 10mm spacer on a e92 M3. Thanks for the orders!
	Appreciate 0 Quote

10-12-2010, 05:19 PM	#5
CarbonAlpine Captain 204 Rep 835 Posts Drives: ///M4 Join Date: Oct 2010 Location: Miami iTrader: (25)	Also pm me your choice for 2011 m3 coupe with oem 19's and stock height. Also pm me about installing to prevent vibrations. And is alignment is needed after? many thanks
	Appreciate 0 Quote

10-13-2010, 02:17 PM	#7
EAS BimmerPost Supporting Vendor 547 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	Which sizes do YOU need? Plenty of spacers in stock and ready to ship!
	Appreciate 0 Quote

10-13-2010, 10:59 PM	#8
TW0929 Lieutenant 26 Rep 529 Posts Drives: 1M Join Date: Feb 2010 Location: NYC iTrader: (0)	please pm 2 sets of 20mm to 08904 thx
	Appreciate 0 Quote

10-25-2010, 01:19 PM	#10
EAS BimmerPost Supporting Vendor 547 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	All orders have been shipped. Enjoy your new aggressive stance!
	Appreciate 0 Quote

11-01-2010, 11:33 AM	#11
david @ eas BimmerPost Supporting Vendor 256 Rep 4,048 Posts Drives: BMW Join Date: Mar 2008 Location: Anaheim iTrader: (5)	Thanks for all the orders over the weekend guys. If you have any further questions, I'm here to help out!
	Appreciate 0 Quote

11-09-2010, 11:20 AM	#12
EAS BimmerPost Supporting Vendor 547 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	All sizes are in stock and ready to ship!
	Appreciate 0 Quote

11-09-2010, 12:48 PM	#13
gthirtyfizle Colonel 191 Rep 2,867 Posts Drives: E92 M3 AW Join Date: Jul 2008 Location: NYC iTrader: (4)	Do u guys sell 8mm?
	Appreciate 0 Quote

11-17-2010, 01:31 AM	#15
shane335i Second Lieutenant 6 Rep 207 Posts Drives: 2016 BMW M4 Join Date: Sep 2008 Location: Woodside, CA iTrader: (0)	Would love to get some info on what the recommended setup is for a stock 2011 M3 Coupe w/competition package is? I may also buy some wheels from you but would stick with the OEM size so the spacers should work before and after. Thanks for any info! -Shane
	Appreciate 0 Quote

11-19-2010, 01:06 PM	#17
EAS BimmerPost Supporting Vendor 547 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	Many sizes in stock, give us a call if you want some Macht Schnell spacers!
	Appreciate 0 Quote

11-23-2010, 02:57 PM	#18
EAS BimmerPost Supporting Vendor 547 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	All PMs have been replied!
	Appreciate 0 Quote

11-30-2010, 07:45 PM	#19
edwin_jo Private 3 Rep 59 Posts Drives: 2011 E92 M3 ED ZCP Join Date: Jun 2010 Location: Miami, FL iTrader: (0)	I am interested in getting spacers for my E92 M3 with Competition Package, what is the recommended size? Thank you. Edwin
	Appreciate 0 Quote

12-04-2010, 02:51 PM	#21
bsb In Reno we don't dial 911 :) 3 Rep 25 Posts Drives: 2008 E90 M3 Join Date: Dec 2010 Location: Reno, NV iTrader: (1)	Hi David, This is my very first post. What spacers would you recommend for a OEM 19 wheels and OEM PS2 tires and Dinan Stage 3 suspension for a 2008 E90. This is a daily driver and intend to do track and auto x next season. Also for those seeking the safest setup for track use exceeding 125 mph are spacers really advised? And if so, what are the options for lock bolts instead of extended lugs? Much thanks!
	Appreciate 0 Quote