Brand New JL audio sound system package+ Alumapro cap ! $2300 Custom starfire pearl !

[StagexM3]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

I can be reached via email ... icee0127aol.com
or call/text - 347-865-7773

I originally put this set up together for my show car but I sold the car so I have no need for this anymore.
My original plan was to run a total of 8 speakers.... 2 speakers on each front door, 2 speakers on the rear deck, and also 2 speakers on the trunk lid with a Screen in between.
The amps and capacitor are painted a beautiful starfire pearl white- I was planing to lay them out in the middle of the trunk, and have the 2 JL audio sub-woofers on the side.

My loss, will definitely be your gain.
Everything is Brand new in original boxes, with all manuals, hardware, etc
This entire set up Retails for over 5,000... I remember paying around 4k.
And I'm looking to get Only $2,300 OBO (this is the pricing for everything listed below. If you only want 6 speakers, price would be 2050. If you want the package with only 4 speakers price would be 1800)

Here is what the package consist of, followed by tons of pics/details :


2- 12" JL AUDIO 12W3V3-4 Subwoofers

8- 6.5" JL AUDIO C5-650 Component speakers. (4 sets/pairs). One set is the
650x coaxial model.

1- JL AUDIO G-MAX 1200W Mono Amp

1- JL AUDIO G6600 1200W 6 Channel Amp

1- Alumapro "The C.A.P" 15 Farad Capacitor

1- Alumpro hardware/wiring kit
( bought seperately, Alumapro sells this for $105)




































C5-650 component speakers :
General Features:

* 75W RMS Power Handling
* 89.5 dB @ 1W/1m Efficiency
* 4 Ohm Impedance
* 48 Hz - 25 KHz ( 3 dB) Frequency Response


Mid-woofer Specifications:

* Cast Alloy Frame
* Patented Elevated Frame Cooling
* DMA-Optimized Motor System
* Mineral-Filled Polypropylene Cone
* Butyl Rubber Surround
* 1-in. / 25 mm Voice Coil
* Kapton Former
* Symmetrical Roll Spider
* Ferrite Magnet
* Mounting Depth: 2.54 in. / 64.6 mm


Tweeter Specifications:

* 0.75 in. / 19 mm Silk Soft Dome
* RSR Variable-Angle Flush-Mount System
* Ferrofluid Cooling and Damping
* Neodymium Magnet
* Flush Mounting Depth: 0.56 in. / 14.2 mm


Crossover Specifications:

* 2-way network with 1st order low-pass and 2nd order high-pass circuit
* Premium Mylar capacitors
* Air-core inductors
* 4-position adjustable tweeter output level
* 3-position midrange presence control
* Polyswitch tweeter protection

G6600 amp:

* 6-channel car amplifier
* at 14.4 volts:
o 75 watts RMS x 6 at 4 ohms (110 watts RMS x 6 at 2 ohms)
o 200 watts RMS x 3 bridged at 4 ohms (150 watts RMS x 3 at 8 ohms)
* at 12.5 volts:
o 55 watts RMS x 6 at 4 ohms (75 watts RMS x 6 at 2 ohms)
o 150 watts RMS x 3 bridged at 4 ohms (110 watts RMS x 3 at 8 ohms)
* differential-balanced inputs
* Advanced Rollback Protection System
* frequency response: 10 to 25,000 Hz
* variable high- and low-pass filter (50-200 Hz, 12 dB/octave)
* switchable bass boost (0, 6 dB at 48 Hz) on channels 5 and 6 only
* optional wired remote control converts switchable bass boost to fully variable (0-12 dB)
* Absolute Symmetry™ Class-AB amplifier design
* MOSFET power and output stages
* preamp-level inputs
* speaker-level input with optional converter
* preamp outputs
* 4-gauge power and ground leads and a 60-amp fuse recommended — wiring and hardware not included with amplifier
* 9-1/4"W x 2-1/2"H x 18-1/16"D

G-max amp:

Features:

* G-Series Single-Channel Monoblock Class D Car Amplifier
* RMS Power Rating @ 14.4 V:
o 4 ohms: 600 watts x 1 chan.
o 2 ohms: 1200 watts x 1 chan.
* RMS Power Rating @ 12.5 V:
o 4 ohms: 450 watts x 1 chan.
o 2 ohms: 900 watts x 1 chan.
* Conventional unregulated power supply
* Power and protection LED indicators
* +6 dB fixed frequency bass boost/EQ
* Differential-balanced input topology for superior noise immunity
* Optional bass remote with the purchase of the RBC-1
* RCA jack inputs
* Pass-through preamp RCA outputs
* High-damping class D circuit with discrete control circuitry
* Damping Factor:
o >500 @ 4 ohm / 50 Hz
o >250 @ 2 ohm / 50 Hz
* Heavy duty aluminum alloy heatsink for maximum heat dissipation
* RCA level inputs
* Screw terminals
* Variable low-pass filter (40-200 Hz, 12 or 24 dB/octave)
* Frequency response: 10-250 Hz
* Dimensions: 15-3/4"L x 9-1/4"W x 2-1/2"H

12W3V3-4 12" subwoofers :

* 12" Single 4 Ohm W3v3 Series Subwoofer
* Power Handling:
o Peak: 1000 watts
o RMS: 500 watts
* Impedance: Single 4 ohms
* Mineral-filled polypropylene upper cone with a metallic JL Audio medallion logo gives the W3's a whole new, classy and sophisticated look
* NBR (Nitrile Butadiene Rubber) surround
* DMA-optimized, long linear excursion capability to virtually eliminate distortion and increase sound output
* Perform outstanding in compact sealed or ported enclosures
* DMA (Dynamic Motor Analysis) modeling to deliver unsurpassed dynamic stability and low-distortion operation within intended power range
* Sensitivity: 87 dB
* Free Air Resonance (Fs): 28.28 Hz
* Electrical "Q" (Qes): 0.553
* Mechanical "Q" (Qms): 6.936
* Total Speaker "Q" (Qts): 0.512
* Equivalent Compliance (Vas): 2.729 cu. ft (not recommended box size)
* Xmax Linear Excursion: 0.510 in. / 13.0 mm
* Driver Displacement: 0.071 cu. ft.

Alumapro 15 farad cap:

* Nominal Voltage All standard up to 15-volt
* Capacitance 15 Farads
* Stored Energy 2000 Joules (2 kJ) minimum
* Connections 24K gold-plated brass (1) 1/0 AWG cable, (2) 4 AWG cable
* Mounting Dimensions 8.75L x 8.75W x 1.66H
* Weight 8 pounds Turnkey System (relays and connectors included)
* Heavy-duty, Gold-Plated Terminals
* Convertible Mounting Options (surface or "stealth")
* Anodized Aluminum Construction
* Optional Voltage Displays Available

[StagexM3]

i fixed the pictures !

[Eugene-TAIWAN]

so what is retail on these?

[StagexM3]

Originally Posted by Eugene-TAIWAN

so what is retail on these?

Retail is over $5,000 for everything.

2300 is an amazing deal =)

[shamoo]

Were you going to some custom setup? Those speakers won't fit in the doors. I've been trying to get some speakers for mine forever now.

[StagexM3]

^ it was going in a custom Lexus show car i had. it can be done... but will be custom work.

bump!

[typemoon]

how much custom work cause i loved the c5's in my honda when I had it, and I been looking into jl component and coxial speakers for e90's