Harrop twin screw sc for s65

bubu · 05-20-2013, 06:27 PM

Did anyone catch the Harrop SC'd E92 M3 @ BimmerFest this past weekend? They actually got a twin screw SC running...and people said it could not be done

. The kit looked OE quality, by far the cleanest setup I have seen out of all the kits out there...if the manifold had an M logo it could easily be mistaken for a factory job.

It had me drooling, as I can only imagine the down-low torque it will deliver. Now the big question will be tune...but aren't all the kits out there

Either way, they are promising a fall release date with an MSRP of $13K...it will be an interesting fall & winter

tightie · 05-20-2013, 07:30 PM

anyone can design a kit, bolt it up. that isn't the hard part.

i'm in to see a review on a tune/how many miles they tested the kit/track tested or not.

Tomislav · 05-20-2013, 07:56 PM

hmmm.... Harrop here said they have one also.

dvpouldar26 · 05-20-2013, 08:28 PM

I saw that kit at Bimmerfest and was shocked to see that someone was finally able to make a twin-screw system. I'm definitely excited to see some more data and some more cars with this kit going around. I agree what it is said above, tuning is the issue with these kits, not hardware; however, knowing Harrop's reputation for working with the OEM's and close ties to Eaton, you'd guess it's a solid kit. It's great to see some new kits out there like Evolve and Harrop....curious to see how they compete with ESS, VF, Gintani, etc.

BPMSport · 05-20-2013, 08:34 PM

I saw it there (and knew about it for months beforehand).

Very nice looking kit. High quality. It's going to be nice to see a positive displacement setup for e9x M3 once the tuning aspects are ironed out

CSL_E36 · 05-20-2013, 09:19 PM

This was my highlight of the show, I was not expecting to see something new and innovative. The guys were very cool and talked me and my friend through the setup, its not a twin screw, however it has twin liquid to air inter coolers

peak TQ @ 1800 RPM, etc.

I think a well tuned roots setup on the S65 utilizing 8 ITBs is a tastey proposition.....looking forward to the Fall release

http://instagram.com/p/ZjnJZFCVgo/

///Matthew · 05-20-2013, 09:21 PM

That was my car at Bimmerfest. I'll try to keep you guys updated as best that I can, I wasn't able to talk specifics prior to the launch at Bimmerfest. I actually flew out to Californina to check in on the build and of course go to the show, but had to head back to New Jersey before doing either.

CSL_E36 · 05-20-2013, 09:23 PM

Quote:

Originally Posted by ///Matthew

That was my car at Bimmerfest. I'll try to keep you guys updated as best that I can, I wasn't able to talk specifics prior to the launch at Bimmerfest. I actually flew out to Californina to check in on the build and of course go to the show, but had to head back to New Jersey before doing either.

Very cool! Love the Santorino Blu!

///Matthew · 05-20-2013, 09:28 PM

Quote:

Originally Posted by 96LTWM3

Very cool! Love the Santorino Blu!

Thank you! I considered Interlagos as well, great color! I am DYING to see the wheels in person on the car since pictures do the paint no justice. Going with the gold BBS E88s wasn't the easiest choice...

supremepower · 05-20-2013, 09:32 PM

Few more pics of the build and the blower unit for you guys....

rngrjag · 05-20-2013, 09:33 PM

96LTWM3,

Two questions: 1. Is your car lowered in signature pic. 2. Are those the OEM GTS (black) rims on your car?

Thanks.

jeff@autocouture · 05-20-2013, 09:33 PM

Quote:

Originally Posted by ///Matthew

Thank you! I considered Interlagos as well, great color! I am DYING to see the wheels in person on the car since pictures do the paint no justice. Going with the gold BBS E88s wasn't the easiest choice...

all out with this one bro!

CSL_E36 · 05-20-2013, 09:36 PM

Quote:

Originally Posted by rngrjag

96LTWM3,

Two questions: 1. Is your car lowered in signature pic. 2. Are those the OEM GTS (black) rims on your car?

Thanks.

H&R sports plus E36 F bump stops and 19in LC 818s 9.5F 11inR!

///Matthew · 05-20-2013, 09:37 PM

Quote:

Originally Posted by studntloan

all out with this one bro!

hahaha, I may have gotten a little carried away... We have to do a shoot with Big Purp when the car is back East!

rngrjag · 05-20-2013, 09:39 PM

Thanks, forgive my ignorance "LCs"? Your car looks awesome, BTW. I have a IB on order and have been considering painting rims black.

Did you have EDC?

W/// · 05-20-2013, 09:46 PM

Wow that really could pass for a stock engine bay. Looking forward to more info

Quote:

Originally Posted by Mike Benvo

I saw it there (and knew about it for months beforehand).

Very nice looking kit. High quality. It's going to be nice to see a positive displacement setup for e9x M3 once the tuning aspects are ironed out

What is that smiley for? Oh no you didn't...?

Richbot · 05-20-2013, 09:48 PM

Wonder where/which way the blower outlet is oriented? Very cool. Way more interesting to me than the centrifugal setups, packaging seems so much cleaner. Wonder if they have a sandwich air/water intercooler or something similar in there, looks plumbed for it? I dig the stock airbox too

Longboarder · 05-20-2013, 09:52 PM

Quote:

Originally Posted by Mike Benvo

I saw it there (and knew about it for months beforehand).

Very nice looking kit. High quality. It's going to be nice to see a positive displacement setup for e9x M3 once the tuning aspects are ironed out

So how far along are you in the process?

regular guy · 05-20-2013, 11:27 PM

I hope this helps.

Rapture · 05-20-2013, 11:39 PM

BPMSport · 05-20-2013, 11:49 PM

Quote:

Originally Posted by Longboarder

So how far along are you in the process?

Haven't started, just interested in seeing it materialize with our without my involvement. Had a cool tuning conversation with Jason from Aviva @ Bimmerfest.

wheatpaste · 05-21-2013, 12:18 AM

Quote:

Originally Posted by Richbot

Wonder where/which way the blower outlet is oriented? Very cool. Way more interesting to me than the centrifugal setups, packaging seems so much cleaner. Wonder if they have a sandwich air/water intercooler or something similar in there, looks plumbed for it? I dig the stock airbox too

Looks like the supercharger is in the middle, with liquid to air intercoolers on each cylinder bank sandwiched between the manifold and the throttle bodies. Based on this, i'm guessing the outlet of the supercharger is facing up. That's all speculation, of course.

Looks like pretty clever packaging. Interested to see how it performs.

05-20-2013, 06:27 PM	#1
bubu Bunny Slayer 83 Rep 501 Posts Drives: E92 M3 - DCT (2013) Join Date: Apr 2010 Location: Orange County - Southern California iTrader: (0)	Harrop twin screw sc for s65 Did anyone catch the Harrop SC'd E92 M3 @ BimmerFest this past weekend? They actually got a twin screw SC running...and people said it could not be done . The kit looked OE quality, by far the cleanest setup I have seen out of all the kits out there...if the manifold had an M logo it could easily be mistaken for a factory job. It had me drooling, as I can only imagine the down-low torque it will deliver. Now the big question will be tune...but aren't all the kits out there Either way, they are promising a fall release date with an MSRP of $13K...it will be an interesting fall & winter
	Appreciate 0 Tweet Quote

05-20-2013, 07:30 PM	#2
tightie JOSH SHOKRI. 522 Rep 5,881 Posts Drives: 991 GT3RS, 964, Raptor Join Date: Aug 2005 Location: los angeles, california. iTrader: (7) Garage List 2008 BMW M3 [7.90]	anyone can design a kit, bolt it up. that isn't the hard part. i'm in to see a review on a tune/how many miles they tested the kit/track tested or not. __________________ Current: 16 991 GT3RS , 91 964 C2, 17 Raptor \| Past: 2015 991 GT3, 2015 i3,15 YMB F80 M3, 13 E92 M3 DCT, 08 E92 M3 6MT, 07 E60 M5, 02 E46 M3 Instagram: @josh_speeddistrict #SpeedDistrict @SpeedDistrict
	Appreciate 0 Quote

05-20-2013, 07:56 PM	#3
Tomislav Panty Schtuffer 21 Rep 320 Posts Drives: 2008 E92 M3 Coupe Join Date: Aug 2011 Location: Perth, Orstralya! iTrader: (0) Garage List 2008 BMW M3 [0.00] 2010 BMW X6M [0.00] 1997 BMW 323i [0.00] 1994 BMW M3 [8.00]	hmmm.... Harrop here said they have one also. __________________ .: 2010 E71 X6M - stock, daily driver, towcar :. .: 2008 E92 M3 - 6MT, Carbon Roof, Eibach Springs, Megan Axle Back exhaust :. .: 1997 E36 323i Frankenstein - too much to list, track whore, stripped, caged, MoTeC, S85B50 :. .: 1994 E36 M3 3.0 - 19" BBS LM Reps, Bilsteins :.
	Appreciate 0 Quote

05-20-2013, 08:28 PM	#4
dvpouldar26 Major 64 Rep 1,498 Posts Drives: 2008 e92 328i, Porsche 987.1 Join Date: May 2008 Location: Beverly Hills, CA iTrader: (4)	I saw that kit at Bimmerfest and was shocked to see that someone was finally able to make a twin-screw system. I'm definitely excited to see some more data and some more cars with this kit going around. I agree what it is said above, tuning is the issue with these kits, not hardware; however, knowing Harrop's reputation for working with the OEM's and close ties to Eaton, you'd guess it's a solid kit. It's great to see some new kits out there like Evolve and Harrop....curious to see how they compete with ESS, VF, Gintani, etc. __________________ E92 328i Jet Black / Gloss Black Grilles / 8000k D1S low beam / 6000k HID fogs / GP Thunder 8500k angels & cornering bulbs / black reflectors / gloss black vinyled window trim / tints / smoked rear turn signals / black roundels / AC Schnitzer roof spoiler / VRS style decklid spoiler / Matte black Stripes / Rear fogs / matte mirrors / 19" LM reps / APR lip
	Appreciate 0 Quote

05-20-2013, 08:34 PM	#5
BPMSport BimmerPost Supporting Vendor 3387 Rep 7,541 Posts Drives: Harrop M3 / F10 M5 / F82 M4 Join Date: Apr 2008 Location: SoCal iTrader: (9) Garage List 2000 BMW M5 [0.00] 1990 BMW 735i Turbo [0.00] 2008 BMW M3 [7.50] 2015 BMW M3 [0.00] 2015 BMW M5 [0.00]	I saw it there (and knew about it for months beforehand). Very nice looking kit. High quality. It's going to be nice to see a positive displacement setup for e9x M3 once the tuning aspects are ironed out __________________ -----\| Like us on Facebook \| Instagram \|\| Tuning Information \| Remote Coding \|----- ----Visit us at www.BPMSport.com - Emotion. Driven. \| Toll Free: (888) 557-5133----
	Appreciate 0 Quote

05-20-2013, 09:19 PM	#6
CSL_E36 Private First Class 60 Rep 198 Posts Drives: 96' S54 E36 ///M3 17' M2 Join Date: Oct 2011 Location: Dublin CA iTrader: (0)	This was my highlight of the show, I was not expecting to see something new and innovative. The guys were very cool and talked me and my friend through the setup, its not a twin screw, however it has twin liquid to air inter coolerspeak TQ @ 1800 RPM, etc. I think a well tuned roots setup on the S65 utilizing 8 ITBs is a tastey proposition.....looking forward to the Fall release http://instagram.com/p/ZjnJZFCVgo/ __________________ 1996 S54 E36 M3 •2017 F87 M2• Sold: 07' e90 335i, 08' e92 M3
	Appreciate 0 Quote

05-20-2013, 09:21 PM	#7
///Matthew Major 196 Rep 1,231 Posts Drives: 2013 M3, 1999 M3 Join Date: Dec 2010 Location: NJ iTrader: (3)	That was my car at Bimmerfest. I'll try to keep you guys updated as best that I can, I wasn't able to talk specifics prior to the launch at Bimmerfest. I actually flew out to Californina to check in on the build and of course go to the show, but had to head back to New Jersey before doing either. __________________ 2013 Santorini Blue M3 1999 Estoril Blue M3 mfatuation.com
	Appreciate 0 Quote

05-20-2013, 09:32 PM	#10
supremepower Supreme Leader 2283 Rep 6,548 Posts Drives: G80, 996GT2, 996TT, 991RS 356b Join Date: Jun 2006 Location: Fullerton, CA So.Cal. iTrader: (15)	Few more pics of the build and the blower unit for you guys.... __________________ **SupremePOWER** 1562 Kimberly Ave Fullerton CA 92831 Contact: sales@supremepower.com :: Shop# (714)632-1951 Sales & service of BBS Street & Motorsport products. BBS Highest Volume Dealer 2015 thru 2022 All the top brands at the prices and service you can count on. Professional installation.
	Appreciate 0 Quote

05-20-2013, 09:33 PM	#11
rngrjag Private First Class 30 Rep 195 Posts Drives: E92 M3 ZCP 6MT Join Date: May 2013 Location: USA iTrader: (0)	96LTWM3, Two questions: 1. Is your car lowered in signature pic. 2. Are those the OEM GTS (black) rims on your car? Thanks.
	Appreciate 0 Quote

05-20-2013, 09:39 PM	#15
rngrjag Private First Class 30 Rep 195 Posts Drives: E92 M3 ZCP 6MT Join Date: May 2013 Location: USA iTrader: (0)	Thanks, forgive my ignorance "LCs"? Your car looks awesome, BTW. I have a IB on order and have been considering painting rims black. Did you have EDC?
	Appreciate 0 Quote

05-20-2013, 09:48 PM	#17
Richbot Major General 2759 Rep 5,484 Posts Drives: Jerez Black E90 Join Date: Sep 2007 Location: STL iTrader: (5)	Wonder where/which way the blower outlet is oriented? Very cool. Way more interesting to me than the centrifugal setups, packaging seems so much cleaner. Wonder if they have a sandwich air/water intercooler or something similar in there, looks plumbed for it? I dig the stock airbox too __________________
	Appreciate 0 Quote

05-20-2013, 11:27 PM	#19
regular guy Lieutenant Colonel 427 Rep 1,947 Posts Drives: Sprint car Join Date: May 2013 Location: California iTrader: (0)	I hope this helps. Attached Images
	Appreciate 0 Quote

05-20-2013, 11:39 PM	#20
Rapture I'm suckin gas but I'm haulin ass 57 Rep 783 Posts Drives: 2016 M3 ZCP MW/SO Join Date: Sep 2010 Location: OC, CA iTrader: (18)
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search