Need Recommedation: Fender roller in LA ?

[mrrm3]

I just replaced my tires w/ slighter wider Super Sports in size 275/35/19 and 255/35/19 (R/F). I also have 12mm spacers all the way around.

Looks amazing, but driver's rear is rubbing against the top of the fender edge during high-speed bumps. The clearance is minimal. I could remove the spacers, but it looks so good as-is.

Can anyone recommend a good BMW shop in the Los Angeles area that can roll the rear fenders a littler wider w/o breaking the paint ?

Thanks!
Matthew

[Lorde]

Lowered?

Maybe go with a 10mm spacer in the rear instead of a 12mm.

[Lorde]

Originally Posted by Team Plutonium

Can't roll the fenders on the M3... they need up be pulled, and a repaint will be in order. I pulled mine to run 315's in the back, but before that I ran 295's without issues. I'd ditch the spacers...

I think most M3s with 255/275 with 15/12 spacers have zero issues unless lowered.

But yeah, reduce the rear spacer or ditch it altogether.

[spr]

Lucent Motors on Sepulveda and Olympic. Ask for Tom.

[Johndong888]

I thought you couldn't roll the fenders on the m3. It should have came pre-rolled. You can obviously pull it.

[mrrm3]

Thanks for all the suggestions guys.

[slicer]

Adjust your camber setting and they should fit. As others stated, no fender to roll on the M3 unless you bend the front facing edge like Team Plutonium did which requires a repaint.