FS:19x3.5" Polished ARS Step-lips

[tdott]

Originally Posted by ACEE

Just for you...I finally heard back from the rim company...the lips are made by ARS

Wasn't a question I had asked. But useful for others to know.

I asked what wheels (make/model) they are for/from.
If you don't know what then perhaps measurements such as the below will help determine if they will fit a certain wheel:



Assembly Hole Pattern / Hole Sizing for M8 Bolts: 40 XØ8.5mm Equally Spaced.
Rim I.D. @ Bolt Flange: 17.500" / Bore: 15.900" / Bolt Circle: 16.580"
Bolt Flange Thickness: 0.180"

[Projekt_BooGie]

Originally Posted by tdott

Wasn't a question I had asked. But useful for others to know.

I asked what wheels (make/model) they are for/from.
If you don't know what then perhaps measurements such as the below will help determine if they will fit a certain wheel:



Assembly Hole Pattern / Hole Sizing for M8 Bolts: 40 XØ8.5mm Equally Spaced.
Rim I.D. @ Bolt Flange: 17.500" / Bore: 15.900" / Bolt Circle: 16.580"
Bolt Flange Thickness: 0.180"

Exact words from the manufacture:
"These are made by ARS. The same company places such as HRE, ADV1 and others gets their lips from"

Thanks for your interest in my lips (I guess), but if there are any other concerns about my post please message me directly. Especially if you are not interested in purchasing.

[tdott]

Originally Posted by ACEE

Thanks for your interest in my lips (I guess), but if there are any other concerns about my post please message me directly. Especially if you are not interested in purchasing.

I have a set of 19" Works I wanted to widen, but I can't tell if this would work on my wheels or not.

[Projekt_BooGie]

Originally Posted by tdott

I have a set of 19" Works I wanted to widen, but I can't tell if this would work on my wheels or not.

ok...I can check into this for you and let you know asap.
Wasn't trying to be a butt hole, but we know a lot of people on the forum can be. I can see if I can get back in touch with the manufacture and ask...

[Projekt_BooGie]

bump

[Projekt_BooGie]

Originally Posted by tdott

I have a set of 19" Works I wanted to widen, but I can't tell if this would work on my wheels or not.

I haven't forgotten about you...been crazy busy with wedding and honeymoon stuff...I'm waiting for an answer