Camber Plates

bryan292009 · 09-18-2016, 11:49 PM

Hey guys got a question looking to pull the trigger on the Bilstein Damptronic B16 EDC curious which type of camber plates I need? I want to go with Ground Control but which setup is required? Also I'm adding Dinan monoball lower control bushings anything else I should change while I am in there?

roastbeef · 10-05-2016, 01:27 AM

i have ground control camber plates and i like them. just holding them in your hand, you can tell they are good quality.

HP Autosport · 10-14-2016, 10:38 PM

Voorslag is the other to consider.

KRZ3 · 10-25-2016, 05:00 PM

I got Vorshlag, works well with the B16D. Talk to Jason at Vorshlag to be sure to get the right ones.

dogbone · 10-29-2016, 08:27 AM

I have owned three different camber plates---Vorshlag, Ground Control street plates, Ground Control race plates.

My favorite is the Vorshlag. They put a huge spherical bearing in their plate that can handle a lot of force. When I researched this years ago, I recall Vorshlag saying their spherical bearing could handle 7500lbs versus the competition bearing that could take 4500lbs. Given the weight of these cars and pulling north of 1.5G's in a turn, the 7500lbs capacity was attractive to me.

The GC race plates (on my JRZ) started to make a creaking noise after 6 months. Since I replaced the GC plates with the Vorshlag plates, I have had several years of trouble-free performance on track. Can't ask for more than that.

admranger · 10-30-2016, 06:56 PM

I have the GC street plates. No issues.

09-18-2016, 11:49 PM	#1
bryan292009 First Lieutenant 67 Rep 341 Posts Drives: 2011 E90 M3 W/ ZCP, ZPP, ZCW Join Date: Oct 2010 Location: Graffenwoehr, Germany iTrader: (0)	Camber Plates Hey guys got a question looking to pull the trigger on the Bilstein Damptronic B16 EDC curious which type of camber plates I need? I want to go with Ground Control but which setup is required? Also I'm adding Dinan monoball lower control bushings anything else I should change while I am in there? __________________ E90 M3 W/ ESS VT2-625, Macht Schnell race X-Pipe, UUC Cat-back exhaust, Stoptech ST60
	Appreciate 0 Tweet Quote

10-05-2016, 01:27 AM	#2
roastbeef Lieutenant General 11586 Rep 12,728 Posts Drives: E92 M3 Join Date: Nov 2010 Location: Orange County, CA iTrader: (4)	i have ground control camber plates and i like them. just holding them in your hand, you can tell they are good quality. __________________ Instagram; @roastbeefmike
	Appreciate 0 Quote

10-14-2016, 10:38 PM	#3
HP Autosport Supreme Allied Commander 3848 Rep 54,381 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Voorslag is the other to consider.
	Appreciate 0 Quote

10-25-2016, 05:00 PM	#4
KRZ3 Private First Class 23 Rep 139 Posts Drives: E90 M3 Join Date: Dec 2015 Location: Home iTrader: (0)	I got Vorshlag, works well with the B16D. Talk to Jason at Vorshlag to be sure to get the right ones. __________________ '09 E90 M3 DCT EDC, ESS VT2 625, ESS HFC, GTS DCT, D2R BBK, B16D, VORSHLAG CP, DELRIN SUB, TE37SL '00 996.1 GT3 CS
	Appreciate 0 Quote

10-29-2016, 08:27 AM	#5
dogbone Colonel 5355 Rep 2,806 Posts Drives: '09 E90 M3 - IB Join Date: Feb 2012 Location: 93 million miles from the Sun iTrader: (1) Garage List 2009 BMW E92 M3 [0.00] 2009 BMW E90 M3 [0.00]	I have owned three different camber plates---Vorshlag, Ground Control street plates, Ground Control race plates. My favorite is the Vorshlag. They put a huge spherical bearing in their plate that can handle a lot of force. When I researched this years ago, I recall Vorshlag saying their spherical bearing could handle 7500lbs versus the competition bearing that could take 4500lbs. Given the weight of these cars and pulling north of 1.5G's in a turn, the 7500lbs capacity was attractive to me. The GC race plates (on my JRZ) started to make a creaking noise after 6 months. Since I replaced the GC plates with the Vorshlag plates, I have had several years of trouble-free performance on track. Can't ask for more than that.
	Appreciate 2 Chuck's M3162.00 roastbeef11586.00 Quote

10-30-2016, 06:56 PM	#6
admranger Retired Curmudgeon 2985 Rep 4,047 Posts Drives: ‘19 X3M40i, ‘18 m550i Join Date: May 2011 Location: Las Vegas, NV iTrader: (1)	I have the GC street plates. No issues. __________________ '19 X3 M40 Carbon Black/Oyster, '23 Jeep Grand Cherokee L Summit, Past BMWs: '18 M550i, '18 330 GT, '16 X5 40e, '11 E90M3, '06 X5 4.4, '03 330i ZHP, '02 M3, '97 Z3 2.8, '95 M3 (2x), '94 530i (manual), '92 525i (manual), '88 M3, '87 325iS
	Appreciate 0 Quote