DIY: Let's pull the front alignment pins - Page 2

InterJon · 03-04-2013, 09:53 AM

Very straightforward. Thank you for the write-up.

Be careful, I sheered off one of the three 13mm bolts on the strut tower. So, now I will be purchasing a new retainer for $110. Sucks! I had a torque wrench to proper spec; just bad luck. Go at them gently.

THE TECH · 03-04-2013, 10:18 AM

Nicely done Rich.

03-04-2013, 10:18 AM	#24
THE TECH BimmerPost Supporting Vendor Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas Posts: 11,936 iTrader: (39)	Nicely done Rich. __________________ Check us out on Facebook at BPMsportLabs

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

03-04-2013, 09:53 AM	#23
InterJon Private First Class Drives: 2011 E92 M3 ZCP Join Date: Aug 2011 Location: Alabama Posts: 117 iTrader: (0)	Very straightforward. Thank you for the write-up. Be careful, I sheered off one of the three 13mm bolts on the strut tower. So, now I will be purchasing a new retainer for $110. Sucks! I had a torque wrench to proper spec; just bad luck. Go at them gently.