|
|
10-18-2011, 12:55 PM | #1 |
New Member
1
Rep 28
Posts |
FS: 19" Maya RT5 Powdercoated Black
The wheels are Maya RT5s powdercoated in a 20% gloss black. The bolts/rivets and the lettering on the face of the spoke are powdercoated in blue. I can't remember the exact specs but I believe they are 19x9 et45 and 19x10 et23. I'm running a 15mm spacer up front. The two front wheels look like they were rubbed up against the curb but it looks easily repairable. One of the rears also has a small spot that looks like it rubbed up against the curb but didn't remove finish. I had a bend repaired on the back of one of the repairs which caused some finish to come off. It's not really a problem since its on the rear. I will include the tires that are currently on the wheels. 245/35/19 federal ss595 with good tread. The rears are mismatched there's a ss595 federal 275/30/19 on one wheel with good tread but some inner wear. The other wheel has a cooper tire 275/30/19 with about 50% or less tread that was put on when the other federal was damaged. I also have a set of H&R 15mm spacers I'll include for the front wheels I was looking at the wheels today and noticed that one of the fronts has some more nicks on it than before and it looks to have a slight bend on the back. Also it looks like the Federal rear tire has a nail in the middle of the tread. It is not leaking any air out but it's there. I'm dropping the price to 800$ as is. Located in Anaheim, CA. I'm also in San Pedro on weekends so I can meet you there. Uploaded with ImageShack.us Last edited by ///mtree; 10-28-2011 at 03:28 PM.. |
Post Reply |
Bookmarks |
|
|