|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
10-03-2012, 03:04 PM | #1 |
Enlisted Member
16
Rep 36
Posts |
19/9.5 Square Setup will it work?
I have an 11' m3 coupe standard package. Not lowered or cambered.
Will an 19/9.5 square set up rub? I'm not worried about the rear due to the fact that the stock wheels are already 9.5.. More worried about rubbing in the front. Thanks |
10-03-2012, 06:00 PM | #4 |
BimmerPost Supporting Vendor
3523
Rep 6,707
Posts |
You can surely do a squared setup in 19x9.5" ET15. Depending on the tire sizes and tire brand you end up with, you may need to camber in the front a little bit (maxing out stock camber should be okay) in order for the front wheels to clear your fenders.
__________________
925-245-0773 /// info@apexraceparts.com
Wheels /// Accessories /// Vehicle-Specific Fitment Guides /// Careers |
Appreciate
0
|
10-05-2012, 05:36 PM | #5 |
GODXSPD
12
Rep 157
Posts |
As another data point, I'm running 19x9.5 ET24 on 265/35R19 with 15mm spacers in the rear on KW V3. No matter what suspension setting I'm on, the front tires scrub the rear portion of the fender liner at about halfway to steering lock.
__________________
e90m / ssii / foxred / wedssport sa-55m 19x9.5 et24 + 265/35r19 square / 15mm rear spacer / no chrome |
Appreciate
0
|
10-05-2012, 05:48 PM | #6 |
-
11817
Rep 23,187
Posts |
i have 19x9.5 et 22 all the way around with ad08 265/30 no rubbing. i run a rear spacer just to give it a flush look.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
10-05-2012, 07:42 PM | #7 |
Lieutenant General
2287
Rep 12,999
Posts |
19 x 9.5 ET27 - 275/30-19 squared (5mm spacer in front, 20mm spacer rear):
20 x 9.5 ET20 - 265/30-20 squared (14mm spacer rear): No rubbing. |
Appreciate
0
|
12-12-2012, 07:16 AM | #8 |
New Member
0
Rep 11
Posts |
|
Appreciate
0
|
12-12-2012, 08:42 AM | #10 |
Lieutenant General
2287
Rep 12,999
Posts |
|
Appreciate
0
|
12-12-2012, 12:35 PM | #11 |
Major
53
Rep 1,162
Posts |
They're BC Forged. Very nice wheels
__________________
Jerez Black/Fox E93 M3 - Prem 2/Cold/Conv/DCT/EDC/19's/Ext Lthr/Crbn Trim/Enhanced Sound/Sat Mods- 20" BBS LM's DBK/Challenge Catback/Eibachs/Trim wrapped black/Lux Angel eyes/35% Tint |
Appreciate
0
|
12-12-2012, 02:39 PM | #12 |
BimmerPost Supporting Vendor
9587
Rep 10,878
Posts |
A 9.5 +15 offset in front will need some negative camber to clear, but it is possible. You should need about 3 degrees of negative camber to fit a 275 tire with a 9.5 +15 offset wheel.
__________________
|
Appreciate
0
|
12-12-2012, 06:04 PM | #13 |
Colonel
84
Rep 2,792
Posts |
I run a 10.5 +20 wheel and a 275 tire on the front with only 1.6 degrees of camber.
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R |
Appreciate
0
|
03-30-2013, 06:42 PM | #15 |
Second Lieutenant
89
Rep 229
Posts |
I am looking to run a 19x10 wheel et25 Square setup, I am on stock EDC suspension 11 M3 can anyone chime in about this rubbing or not? 265-30-19 275-30-19?
Either the above setup or 19x9-etc 18 and 19x9 et 25 with a 245-35/275-35? |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|