PYSpeed.com | TecnoCraft E9X M3 ENVY *Limited Time Special* - Page 2

Eric@PYSpeed.com · 10-18-2009, 09:09 PM

The ENVY system performance will at least equal if not exceed to what Dinan delivers. Test results will come soon when it's available.

Thanks for all the support. You guys won't be disappointed with this TecnoCraft system. =)

**We have only 1 set left with this introductory special for free shipping**

asukadc · 10-19-2009, 08:55 PM

i'd need one, hopefully soon after i get my m

Eric@PYSpeed.com · 10-20-2009, 12:49 AM

Just want to share a Studio Picture of the Exclusive PYSpeed TecnoCraft ENVY Complete Intake System. =)

RGuard250 · 10-20-2009, 05:37 AM

Very Very Nice

Eric@PYSpeed.com · 10-22-2009, 03:28 PM

All TecnoCraft ENVY Intake system are Made in USA. In-House is Awesome... =)

TOOMANYCARS · 10-22-2009, 05:20 PM

Does that use the oem replacement filter or something different?

Eric@PYSpeed.com · 10-22-2009, 05:22 PM

Quote:

Originally Posted by TOOMANYCARS

Does that use the oem replacement filter or something different?

OEM works fine, or we have BMC filter package to go with it. PM me if you have more questions. =)

michaeldorian · 10-22-2009, 08:53 PM

First off, a big thanks to Eric@Pyspeed for the super fast shipping and service. These guys seriously rock.

Just got home from work and it was waiting at my door. Couple of observations:

1. The CF quality exceeded expectations. The weave, finish and over all feel of the charger is near perfect. It really feels like something OEM. Compared to the Dinan unit I saw, I would rate the quality higher. The weave is straight and smooth.
2. The gloss finish is really nice. I would say it matches the carbon fiber roof very well.
3. It feels very light.
4. The metal badge is a very nice touch. Adds a nice premium feel to product.
5. The volume of the unit is noticeably bigger then the OEM unit. Hopefully this leads to better performance.
6. Between the Dinan unit and this, I would go with Technocraft. The quality just feels much better.
7. The design is very similar to the Dinan unit I saw.

Now that we covered the look and feel, the important part is next. Does it actually make any power?

I don’t know, but hopefully next week we’ll find out. I have a dyno session scheduled and I’ll do a before and after run and let you guys know. One stock, one with the charger unit and one with the charger and BMC filter.

Cheers!

aus · 10-22-2009, 11:09 PM

Quote:

Originally Posted by Eric@PYSpeed.com

Just want to share a Studio Picture of the Exclusive PYSpeed TecnoCraft ENVY Complete Intake System. =)

Combine that with an EAS CF intake manifold and that would be carbon fiber nirvana.

Eugene-TAIWAN · 10-23-2009, 01:48 AM

Please PM me a price with shipping to TW

2 prices.

1 just for the envy pipe

2. for the entire intake system

M3_LIN · 10-23-2009, 11:41 AM

Quote:

Originally Posted by aus

Combine that with an EAS CF intake manifold and that would be carbon fiber nirvana.

I think they have a CF intake manifold that they are going to make.

Its going to be ALL CF and not an overlay.

Ed Lin

M3_LIN · 10-23-2009, 03:36 PM

NEW carbon KEVLAR PICS here:

http://www.m3post.com/forums/showthread.php?p=6087384

Ed Lin

Eugene-TAIWAN · 10-25-2009, 01:19 AM

Does Technocraft Have A Offical Site?

albert1028 · 10-25-2009, 01:27 AM

Quote:

Originally Posted by Eugene-TAIWAN

Does Technocraft Have A Offical Site?

yup. It's actually spelled TECNOCRAFT. The website is http://www.tecnocraft.com/.

Eugene-TAIWAN · 10-25-2009, 04:48 AM

Quote:

Originally Posted by albert1028

yup. It's actually spelled TECNOCRAFT. The website is http://www.tecnocraft.com/.

right thanks for the heads up!

Eric@PYSpeed.com · 10-27-2009, 02:07 PM

Orders all shipped out. We just got more in stock, let's go! =)

SECRET M · 10-29-2009, 03:04 AM

how about you guys offer it up to someone at 50% in exchange for going to dyno this for you? really blows that you're claiming 'increased airflow' but you don't really know what that means or how to quantify the advantage.

Eric@PYSpeed.com · 11-07-2009, 05:35 PM

Bump ~

Eugene-TAIWAN · 11-08-2009, 01:28 AM

Quote:

Originally Posted by SECRET M

how about you guys offer it up to someone at 50% in exchange for going to dyno this for you? really blows that you're claiming 'increased airflow' but you don't really know what that means or how to quantify the advantage.

you will see the dynoed results next week. This I assure you.
and 50% off is not needed.

Eric@PYSpeed.com · 11-10-2009, 02:39 AM

Complete DIY installation Guide for the Tecnocraft ENVY Intake System

M3_LIN · 11-10-2009, 03:24 AM

i heard through the grape vine they are dyno'ing this intake SOON!!!!!

Ed Lin

10-22-2009, 05:20 PM	#28
TOOMANYCARS Second Lieutenant Drives: 2009 E92 M3 Join Date: Aug 2009 Location: V.O.W Posts: 221 iTrader: (0)	Does that use the oem replacement filter or something different? __________________ Everything is work in progress.

10-22-2009, 08:53 PM	#30
michaeldorian Captain Drives: Beater Nissan Truck Join Date: Jan 2008 Location: Seattle, WA Posts: 954 iTrader: (0)	Thanks! Eric! First off, a big thanks to Eric@Pyspeed for the super fast shipping and service. These guys seriously rock. Just got home from work and it was waiting at my door. Couple of observations: 1. The CF quality exceeded expectations. The weave, finish and over all feel of the charger is near perfect. It really feels like something OEM. Compared to the Dinan unit I saw, I would rate the quality higher. The weave is straight and smooth. 2. The gloss finish is really nice. I would say it matches the carbon fiber roof very well. 3. It feels very light. 4. The metal badge is a very nice touch. Adds a nice premium feel to product. 5. The volume of the unit is noticeably bigger then the OEM unit. Hopefully this leads to better performance. 6. Between the Dinan unit and this, I would go with Technocraft. The quality just feels much better. 7. The design is very similar to the Dinan unit I saw. Now that we covered the look and feel, the important part is next. Does it actually make any power? I don’t know, but hopefully next week we’ll find out. I have a dyno session scheduled and I’ll do a before and after run and let you guys know. One stock, one with the charger unit and one with the charger and BMC filter. Cheers! Attached Images __________________

10-23-2009, 01:48 AM	#32
Eugene-TAIWAN Brigadier General Drives: E92 M3 Coupe Join Date: Jun 2009 Location: Taiwan Posts: 3,103 iTrader: (4)	Please PM me a price with shipping to TW 2 prices. 1 just for the envy pipe 2. for the entire intake system __________________ Past: Gintani stage3 M3 present: Porsche 993, 964,997.1 GT3, Panamera Turbo waiting to be delivered 2015: Porsche 991 GT3RS

10-23-2009, 03:36 PM	#34
M3_LIN LM-R Whore. Drives: 2009 White M3 Sedan Join Date: Apr 2009 Location: LA Posts: 857 iTrader: (1)	NEW carbon KEVLAR PICS here: http://www.m3post.com/forums/showthread.php?p=6087384 Ed Lin __________________ 09AWE90M: Light headlight tint, Full front end clear bra wrap(Harris@InstyleGraphics), Ceramic tint(40%), Piaa GTX H3 bulb, HID 8k AE, 6k Low, INT Luxer1 lights, RD springs, LMR 20X9 +8, 20X10 +18 (Dave @ Status), Vertice CF hood Ducts(Dat @ VertexUSA), Tecnocraft FULL Envy Intake system+plenum(KEVLAR)+cabin filter covers, Meister GTC exhaust, Arkym F LIP.

10-25-2009, 01:19 AM	#35
Eugene-TAIWAN Brigadier General Drives: E92 M3 Coupe Join Date: Jun 2009 Location: Taiwan Posts: 3,103 iTrader: (4)	Does Technocraft Have A Offical Site? __________________ Past: Gintani stage3 M3 present: Porsche 993, 964,997.1 GT3, Panamera Turbo waiting to be delivered 2015: Porsche 991 GT3RS

10-18-2009, 09:09 PM	#23
Eric@PYSpeed.com BimmerPost Supporting Vendor Drives: E90 \| F10 \| A4 Join Date: May 2009 Location: San Jose, CA 866.207.3722 Posts: 4,551 iTrader: (36)	The ENVY system performance will at least equal if not exceed to what Dinan delivers. Test results will come soon when it's available. Thanks for all the support. You guys won't be disappointed with this TecnoCraft system. =) We have only 1 set left with this introductory special for free shipping

10-19-2009, 08:55 PM	#24
asukadc New Member Drives: 2005 AW M5 Join Date: Apr 2009 Location: Socal Posts: 22 iTrader: (0)	i'd need one, hopefully soon after i get my m

10-20-2009, 12:49 AM	#25
Eric@PYSpeed.com BimmerPost Supporting Vendor Drives: E90 \| F10 \| A4 Join Date: May 2009 Location: San Jose, CA 866.207.3722 Posts: 4,551 iTrader: (36)	Just want to share a Studio Picture of the Exclusive PYSpeed TecnoCraft ENVY Complete Intake System. =)

10-20-2009, 05:37 AM	#26
RGuard250 Titanium TCP Drives: E92 M3 Join Date: Sep 2009 Location: Honolulu Posts: 168 iTrader: (0)	Very Very Nice

10-22-2009, 03:28 PM	#27
Eric@PYSpeed.com BimmerPost Supporting Vendor Drives: E90 \| F10 \| A4 Join Date: May 2009 Location: San Jose, CA 866.207.3722 Posts: 4,551 iTrader: (36)	All TecnoCraft ENVY Intake system are Made in USA. In-House is Awesome... =)

10-27-2009, 02:07 PM	#38
Eric@PYSpeed.com BimmerPost Supporting Vendor Drives: E90 \| F10 \| A4 Join Date: May 2009 Location: San Jose, CA 866.207.3722 Posts: 4,551 iTrader: (36)	Orders all shipped out. We just got more in stock, let's go! =)

10-29-2009, 03:04 AM	#39
SECRET M Engineer Drives: 2008 E92 M3 Join Date: Nov 2005 Location: Northern California Posts: 274 iTrader: (1)	how about you guys offer it up to someone at 50% in exchange for going to dyno this for you? really blows that you're claiming 'increased airflow' but you don't really know what that means or how to quantify the advantage. __________________ 2012 Range Rover Sport Autobiography :: Sumatra Black\|Tan.Ebony 2008 BMW ///M3 :: Space Gray\|Black

11-07-2009, 05:35 PM	#40
Eric@PYSpeed.com BimmerPost Supporting Vendor Drives: E90 \| F10 \| A4 Join Date: May 2009 Location: San Jose, CA 866.207.3722 Posts: 4,551 iTrader: (36)	Bump ~

11-10-2009, 02:39 AM	#42
Eric@PYSpeed.com BimmerPost Supporting Vendor Drives: E90 \| F10 \| A4 Join Date: May 2009 Location: San Jose, CA 866.207.3722 Posts: 4,551 iTrader: (36)	Complete DIY installation Guide for the Tecnocraft ENVY Intake System

11-10-2009, 03:24 AM	#43
M3_LIN LM-R Whore. Drives: 2009 White M3 Sedan Join Date: Apr 2009 Location: LA Posts: 857 iTrader: (1)	i heard through the grape vine they are dyno'ing this intake SOON!!!!! Ed Lin __________________ 09AWE90M: Light headlight tint, Full front end clear bra wrap(Harris@InstyleGraphics), Ceramic tint(40%), Piaa GTX H3 bulb, HID 8k AE, 6k Low, INT Luxer1 lights, RD springs, LMR 20X9 +8, 20X10 +18 (Dave @ Status), Vertice CF hood Ducts(Dat @ VertexUSA), Tecnocraft FULL Envy Intake system+plenum(KEVLAR)+cabin filter covers, Meister GTC exhaust, Arkym F LIP.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search