Will this set up work without rubbing

dcstep · 02-03-2011, 10:17 PM

I'm considering TC Kline Volk wheels with the following measurements for my M3 E92:

18x9.5 +28
18x10.5 +30

Tires will be Dunlop Direzzas in 275-35 18s. The set up will likely be for both DD and autocross. The car is lowered slightly with the Dinan springs. To keep weight down, I'd rather not run spacers, but I'd consider them to make the setup work.

Has anyone worked with this or a similar setup?

Thanks in advance.

Dave

elh0102 · 02-04-2011, 08:34 AM

the 18X9.5, 28 offset should work on all corners with that tire, so why not use four of those so you can freely rotate?

Radiation Joe · 02-04-2011, 08:50 AM

You may want to take measurements between the stock front tire and the strut. I think you may run out of room with the above set-up.

elh0102 · 02-04-2011, 09:20 AM

Quote:

Originally Posted by Radiation Joe

You may want to take measurements between the stock front tire and the strut. I think you may run out of room with the above set-up.

Yep, always a good idea. I know that size tire works up front with a 10" wheel width, and 25 offset, so the 28 should work with a 9.5" wheel.

dcstep · 02-04-2011, 09:36 AM

Quote:

Originally Posted by elh0102

the 18X9.5, 28 offset should work on all corners with that tire, so why not use four of those so you can freely rotate?

I'm considering a used set. I probably will end up with a square wheel setup, but this particular set of wheels peaked my interest.

Thanks to everyone for their responses.

02-03-2011, 10:17 PM	#1
dcstep Major General 1290 Rep 7,389 Posts Drives: '09 Cpe Silverstone FR 6MT Join Date: Nov 2008 Location: Colorado iTrader: (0) Garage List 2009 M3 [8.40]	Will this set up work without rubbing I'm considering TC Kline Volk wheels with the following measurements for my M3 E92: 18x9.5 +28 18x10.5 +30 Tires will be Dunlop Direzzas in 275-35 18s. The set up will likely be for both DD and autocross. The car is lowered slightly with the Dinan springs. To keep weight down, I'd rather not run spacers, but I'd consider them to make the setup work. Has anyone worked with this or a similar setup? Thanks in advance. Dave __________________ Flickr Photos Ucm, Inc.
	Appreciate 0 Tweet Quote

02-04-2011, 08:34 AM	#2
elh0102 Captain 15 Rep 751 Posts Drives: 2009 335i coupe Join Date: Apr 2010 Location: USA iTrader: (0)	the 18X9.5, 28 offset should work on all corners with that tire, so why not use four of those so you can freely rotate?
	Appreciate 0 Quote

02-04-2011, 08:50 AM	#3
Radiation Joe Veni Vidi Vici 89 Rep 2,750 Posts Drives: '11 JB/BBe-6sp-e90 Join Date: Jul 2008 Location: Macungie PA iTrader: (0) Garage List 2011 e90 M3-Sold [8.50] 2003 RS6 - Sold [0.00] 2009 e90 M3 - Gone [0.00] 2003 M3 SOLD [0.00] old 2002 [10.00]	You may want to take measurements between the stock front tire and the strut. I think you may run out of room with the above set-up. __________________ Dinan compliment of stuff plus PF rotors and RG63s. Enough for now. Why, yes. I am an abrasive bastard.
	Appreciate 0 Quote