VMR 710 wheels

JamesKilcarr · 09-08-2012, 03:36 PM

hi i want to get the vmr 710 wheels in 19x9.5 up front and 19x11 rear. i wanna put 295/35/19 and 255/30/19 tires, my car is completely stock, does anyone have this set up and know if it rubs? will it rub at all hitting a bump or with people in the backseat? im new to this and any help would be greatly appreciated thanks

C|3R1C · 09-09-2012, 01:02 AM

Quote:

Originally Posted by JamesKilcarr

hi i want to get the vmr 710 wheels in 19x9.5 up front and 19x11 rear. i wanna put 295/35/19 and 255/30/19 tires, my car is completely stock, does anyone have this set up and know if it rubs? will it rub at all hitting a bump or with people in the backseat? im new to this and any help would be greatly appreciated thanks

I dont personally have VMR wheels, but I'm going to guess that the offsets are such that the rim reaches the edge of the fender. If that is the case, I have 295/30/19 in the read with a VERY VERY VERY slight rubbing on the backside of the rim. So slight I could barely tell it was there when I looked, but that I think that is because my PSS tires are little fat.

In addition, I believe 255/35 will not rub either, because that size was quoted to me to be a perfect fit, and at EAS their car uses 265/30 with no rubbing issues too. That what I was told them I asked last time I was there for a dyno.

Hope this helps!

BMW Fanatic · 09-09-2012, 01:34 AM

I'm sure you meant 295/30/19 on the back.

What is the offset on the 9.5"? I am running 19x10F and 19x11R with 265/30/19 and 295/30/19 tires, respectively. I do not rub on a ZCP drop but probably will once lowered. I'm sure you will be fine.

If you don't plan on lowering the car at all I'd go with 255/35/19F and 295/30/19.

JamesKilcarr · 09-09-2012, 11:07 AM

thanks guys, the front offset is 22 and the ear is 25, i just dont want anything to rub bad when i hit a bump and damage the fender of my car or something like that

BMW Fanatic · 09-09-2012, 02:54 PM

With those offsets and stock height you won't rub with 255/35/19 and 295/30/19. I hope you take bumps, entrances etc at angles when you can, there's no reason to rub even with a drop unless your turning ratio is bigger than the fender size.

JamesKilcarr · 09-09-2012, 05:45 PM

Yea i take all bumps and everything as carefully as i can, ill llet you know how it goes when i install them thanks so much for the help

1MOREMOD · 09-09-2012, 10:35 PM

the front will work with a 265/30 with that offset. i have the vmrs and run ad08s also which run very wide.

JamesKilcarr · 09-10-2012, 07:40 AM

Hiw about the the rears with a 295/30?

1MOREMOD · 09-10-2012, 08:32 AM

Don't know that for sure I run 265-30 in the rear as well. I'm more interested in dialing out the natural understeer feel than straight line. I also can rotate all the way around the car adding tire life on the track.

gallian93 · 09-13-2012, 02:15 PM

Quote:

Originally Posted by JamesKilcarr

Hiw about the the rears with a 295/30?

i have VMR 710 19s and an 11inch rear wheel w 275/35 Conti DWS

the rubber looks a little stretched, which i am not a big fan off....
but i dont think i could go back to the 30 profile i had on my last set....the ride on a DD is too rough.... plus i'm always worried about blowouts on low profile tire... the streets of philly are littered with "DONK" blowouts...

For me 35 profile is a must.... how ever next spring i will try to stuff a 285/35.... i'll let you know how that goes

JerryK73 · 09-13-2012, 02:18 PM

I have that exact set up on my E92 and have had no rubbing issues what so ever.

JamesKilcarr · 09-13-2012, 03:40 PM

Thats great to here, even over bumps and with people in the car?
Thanks for the help

JamesKilcarr · 09-13-2012, 03:41 PM

Ok thanks ill let you know how mine goes as well

JerryK73 · 09-15-2012, 09:12 PM

Quote:

Originally Posted by JamesKilcarr

Thats great to here, even over bumps and with people in the car?
Thanks for the help

I rarely drive with more than 1 passenger in the car to be honest but on the few occasions that I have I've had no issues.

09-08-2012, 03:36 PM	#1
JamesKilcarr Enlisted Member 8 Rep 49 Posts Drives: 2011 jet black e92 m3 Join Date: Sep 2012 Location: queens ny iTrader: (0)	VMR 710 wheels hi i want to get the vmr 710 wheels in 19x9.5 up front and 19x11 rear. i wanna put 295/35/19 and 255/30/19 tires, my car is completely stock, does anyone have this set up and know if it rubs? will it rub at all hitting a bump or with people in the backseat? im new to this and any help would be greatly appreciated thanks
	Appreciate 0 Tweet Quote

09-09-2012, 01:34 AM	#3
BMW Fanatic Banned 135 Rep 3,293 Posts Drives: slow Join Date: Jul 2009 Location: Calgary iTrader: (11)	I'm sure you meant 295/30/19 on the back. What is the offset on the 9.5"? I am running 19x10F and 19x11R with 265/30/19 and 295/30/19 tires, respectively. I do not rub on a ZCP drop but probably will once lowered. I'm sure you will be fine. If you don't plan on lowering the car at all I'd go with 255/35/19F and 295/30/19.
	Appreciate 0 Quote

09-09-2012, 11:07 AM	#4
JamesKilcarr Enlisted Member 8 Rep 49 Posts Drives: 2011 jet black e92 m3 Join Date: Sep 2012 Location: queens ny iTrader: (0)	thanks guys, the front offset is 22 and the ear is 25, i just dont want anything to rub bad when i hit a bump and damage the fender of my car or something like that
	Appreciate 0 Quote

09-09-2012, 02:54 PM	#5
BMW Fanatic Banned 135 Rep 3,293 Posts Drives: slow Join Date: Jul 2009 Location: Calgary iTrader: (11)	With those offsets and stock height you won't rub with 255/35/19 and 295/30/19. I hope you take bumps, entrances etc at angles when you can, there's no reason to rub even with a drop unless your turning ratio is bigger than the fender size.
	Appreciate 0 Quote

09-09-2012, 05:45 PM	#6
JamesKilcarr Enlisted Member 8 Rep 49 Posts Drives: 2011 jet black e92 m3 Join Date: Sep 2012 Location: queens ny iTrader: (0)	Yea i take all bumps and everything as carefully as i can, ill llet you know how it goes when i install them thanks so much for the help
	Appreciate 0 Quote

09-09-2012, 10:35 PM	#7
1MOREMOD - 11817 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	the front will work with a 265/30 with that offset. i have the vmrs and run ad08s also which run very wide. __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC bars\|GC race control arms\|GC bushings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster\|Euro header\|BW exhaust\|K&N c.a.i.\|Epic race tune\|Rouge pulleys\|Seibon CF hood\|CSL bumper\|apr gt 250 & splitter\|ST-40\|XR-2\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|BMWpedals\|BW studs\|
	Appreciate 0 Quote

09-10-2012, 07:40 AM	#8
JamesKilcarr Enlisted Member 8 Rep 49 Posts Drives: 2011 jet black e92 m3 Join Date: Sep 2012 Location: queens ny iTrader: (0)	Hiw about the the rears with a 295/30?
	Appreciate 0 Quote

09-10-2012, 08:32 AM	#9
1MOREMOD - 11817 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	Don't know that for sure I run 265-30 in the rear as well. I'm more interested in dialing out the natural understeer feel than straight line. I also can rotate all the way around the car adding tire life on the track. __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC bars\|GC race control arms\|GC bushings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster\|Euro header\|BW exhaust\|K&N c.a.i.\|Epic race tune\|Rouge pulleys\|Seibon CF hood\|CSL bumper\|apr gt 250 & splitter\|ST-40\|XR-2\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|BMWpedals\|BW studs\|
	Appreciate 0 Quote

09-13-2012, 02:18 PM	#11
JerryK73 Second Lieutenant 17 Rep 286 Posts Drives: 2009 LeMans Blue Coupe Join Date: Oct 2010 Location: New Jersey/New Orleans/Houston iTrader: (3)	I have that exact set up on my E92 and have had no rubbing issues what so ever.
	Appreciate 0 Quote

09-13-2012, 03:40 PM	#12
JamesKilcarr Enlisted Member 8 Rep 49 Posts Drives: 2011 jet black e92 m3 Join Date: Sep 2012 Location: queens ny iTrader: (0)	Thats great to here, even over bumps and with people in the car? Thanks for the help
	Appreciate 0 Quote

09-13-2012, 03:41 PM	#13
JamesKilcarr Enlisted Member 8 Rep 49 Posts Drives: 2011 jet black e92 m3 Join Date: Sep 2012 Location: queens ny iTrader: (0)	Ok thanks ill let you know how mine goes as well
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search