BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Engine, Transmission, Exhaust, Drivetrain, ECU Software Modifications
 
EXXEL Distributions
Post Reply
 
Thread Tools Search this Thread
      10-26-2012, 09:38 AM   #45
ussoldierforhire
Lieutenant
United_States
51
Rep
545
Posts

Drives: 2011 M3 E92
Join Date: Apr 2011
Location: Virginia Beach, VA

iTrader: (1)

Quote:
Originally Posted by chriszeh View Post
well that is because hp is a measure of the rate of work being done not a force like torque.

And that's SCIENCE!
Appreciate 0
      10-26-2012, 09:42 AM   #46
dspralph
Taiwan
dspralph's Avatar
United_States
11
Rep
122
Posts

Drives: 2011.5 'Reventon' E92 M3
Join Date: Apr 2008
Location: Troy, MI

iTrader: (1)

wow
__________________
2011.5 "Reventon" E92 M3
"Reventon" Paint/ Active Autowerke Stage 2 SC/Signature X Pipe/Signature Exhaust/S1 SSK/ Stoptech Trophy BBK/ Vorsteiner-GTS3 Front Bumper/Rear Diffuser/Boot Lid/ OSS Angel eyes/ KW Clubsport Coilovers/ HRE P40SC/ Michelin PSS/ BMW Performance-Electronic Steering Wheel V2/Shift Knob/Hand Brake/ STRI Gauges/::modmynav Backup Camera/Hüper Optik Tint
Appreciate 0
      10-26-2012, 11:38 AM   #47
DLSJ5
Brigadier General
DLSJ5's Avatar
United_States
501
Rep
4,033
Posts

Drives: 2016 F82 M4 ZCP
Join Date: Dec 2006
Location: CA

iTrader: (1)

Quote:
Originally Posted by Mbauer View Post
Nice work drew!
Thanks Jeff.

Quote:
Originally Posted by kiloil View Post
Have you bumped your head? As long as I have known you, you've always wanted more in your cars. Come-on now rip that thing out and slap larger blower in there.
Lol, no I live in a more realistic world now. Think about it, this a simple build, drop in low comp pistons, rods, and bearings, nothing else was done to the motor, no sleeving, head studs, cams, etc. The car is making 70-80 more whp and 80 - 100CHP over the top rated ESS OTS kits, with only 4 more psi and compared to other kits it's on that same dyno it's only 2psi more and remember with lowered compression you lose power. With the VT625+ you need 93+ octane, with the VT3 you can run 91 only. 660whp, depending on how you calculate DTL, is ~775CHP, that's plenty for a RWD car, lol, anymore what's the point? How do you put the power down, at that point you're more frustrated than happy. This is the ONLY way to reaslitically make more RELIABLE power without going crazy on the build, fuel system, blower, adding turbo's, etc. You didn't just buy more power, you bought upgrades for the motor to make it safer and more reliable for more boost.

A YSI blower? You guys ever heard one? They are obnoxiously loud, the T-Trim will not add anymore power and tapping the oil on this car is not ideal IMHO. Currently this is the only documented Stage 3 car, running a V3 Vortech, that is making ~660whp STD at 11psi on a Dynojet. Another factor is the DCT transmission, how much can it handle? I've already had one go out on me when I tried different clutch packs, so I'm done experimenting, let the other poor soul give it a try. The car runs AWESOME right now, I'm not about to do anything to it, except enjoy it for a good long while.
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP
ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ
ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ
Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH
Appreciate 0
      10-26-2012, 11:40 AM   #48
DLSJ5
Brigadier General
DLSJ5's Avatar
United_States
501
Rep
4,033
Posts

Drives: 2016 F82 M4 ZCP
Join Date: Dec 2006
Location: CA

iTrader: (1)

Quote:
Originally Posted by dspralph View Post
wow
Quote:
Originally Posted by the infamous... View Post
:jawdrop: sweet baby jesus titty fuckin mary magdelan christ!!! this's unprecedented, gotDAYUM!
Quote:
Originally Posted by 4sevens.com View Post
whoa
Quote:
Originally Posted by irish100p View Post
Very impressive numbers indeed. I'm also impressed to see the Stock DCT is handling this level of power.
Thanks guys!



Quote:
Originally Posted by biglare View Post
More WORLD RECORDS for ESS!

Congrats Drew! You deserve it!


I'm looking forward to a ridealong!


Haha, thanks Lare!


Quote:
Originally Posted by tightie View Post
Nice numbers pal!
Thanks J!
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP
ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ
ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ
Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH
Appreciate 0
      10-27-2012, 12:33 PM   #49
GOVCO
Lieutenant
16
Rep
439
Posts

Drives: 09 E90 AW M3 DCT [Slight Mods]
Join Date: Jun 2011
Location: MD

iTrader: (0)

You sir, need to send me all the vids you can compile cause I am excited to see what our cars can do when you put some serious power into them. Damn! Nice build!
Appreciate 0
      10-28-2012, 10:23 AM   #50
DLSJ5
Brigadier General
DLSJ5's Avatar
United_States
501
Rep
4,033
Posts

Drives: 2016 F82 M4 ZCP
Join Date: Dec 2006
Location: CA

iTrader: (1)

Quote:
Originally Posted by GOVCO
You sir, need to send me all the vids you can compile cause I am excited to see what our cars can do when you put some serious power into them. Damn! Nice build!
Thanks Govco!
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP
ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ
ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ
Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH
Appreciate 0
      10-29-2012, 12:34 PM   #51
joe@trinityautosport
joe@trinityautosport's Avatar
United_States
210
Rep
1,385
Posts

Drives: E92 M3 | F10 M5
Join Date: Apr 2012
Location: Anaheim, CA

iTrader: (10)

SICK! Can't wait for the event next week
Appreciate 0
      10-29-2012, 01:03 PM   #52
In Extremis
First Lieutenant
In Extremis's Avatar
38
Rep
385
Posts

Drives: G42 M240i xdrive
Join Date: Aug 2010
Location: Long Island, NY

iTrader: (1)

Quote:
Originally Posted by DLSJ5 View Post
I've already had one go out on me when I tried different clutch packs, so I'm done experimenting, let the other poor soul give it a try. The car runs AWESOME right now, I'm not about to do anything to it, except enjoy it for a good long while.
I'd do the same thing if I were in your shoes, these cars make for very expensive experiments.
Appreciate 0
      10-30-2012, 12:13 PM   #53
DLSJ5
Brigadier General
DLSJ5's Avatar
United_States
501
Rep
4,033
Posts

Drives: 2016 F82 M4 ZCP
Join Date: Dec 2006
Location: CA

iTrader: (1)

Quote:
Originally Posted by joe@trinityautosport View Post
SICK! Can't wait for the event next week
It's going to be a lot of fun Joe, your car should do very well.

Quote:
Originally Posted by jordanE92 View Post
I'd do the same thing if I were in your shoes, these cars make for very expensive experiments.
Agreed.
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP
ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ
ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ
Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH
Appreciate 0
      10-30-2012, 12:36 PM   #54
Glasgo
New Member
0
Rep
13
Posts

Drives: 2009 Silverstone VF620 E92 M3
Join Date: Aug 2012
Location: Houston, Texas

iTrader: (0)

This thread is full of win. Looking forward to seeing some footage of the airstrip runs.

Not to get the thread of topic, but what kind of Dyno did you run your 625 bolt on car on? Impressive numbers. When my VF car had the 620 pulley on, I did 534whp on a Dyno Dynamics. Now that I've done the 650 pulley, built motor is my last option for more power, so I'm looking forward to seeing your results in action.

Keep up the good work. Cheers.
Appreciate 0
      10-30-2012, 01:51 PM   #55
W///
Lieutenant General
W///'s Avatar
7433
Rep
12,291
Posts

Drives: F82GTS, E36/E92M3, Z4M
Join Date: Sep 2011
Location: SC

iTrader: (13)

So just out of curiosity, will there ever be an HP number that you think to yourself, ok that's enough? What an incredible car. Way to raise the already high bar the S65 set! Looking forward to videos.
__________________
Current:
16 F82 M4 GTS, Black Sapphire/Black, DCT
08 E92 M3, Sparkling Graphite/Bamboo Beige, 6MT
07 E85 Z4M Roadster, Alpine White/Red, 6MT
99 E36 M3, Techno Violet/Dove Grey, 6MT
Appreciate 0
      10-31-2012, 03:28 PM   #56
DLSJ5
Brigadier General
DLSJ5's Avatar
United_States
501
Rep
4,033
Posts

Drives: 2016 F82 M4 ZCP
Join Date: Dec 2006
Location: CA

iTrader: (1)

Quote:
Originally Posted by Glasgo View Post
This thread is full of win. Looking forward to seeing some footage of the airstrip runs.

Not to get the thread of topic, but what kind of Dyno did you run your 625 bolt on car on? Impressive numbers. When my VF car had the 620 pulley on, I did 534whp on a Dyno Dynamics. Now that I've done the 650 pulley, built motor is my last option for more power, so I'm looking forward to seeing your results in action.

Keep up the good work. Cheers.
Thank you, I ran the VT625 on the exact same dyno.

Quote:
Originally Posted by W/// View Post
So just out of curiosity, will there ever be an HP number that you think to yourself, ok that's enough? What an incredible car. Way to raise the already high bar the S65 set! Looking forward to videos.
I think 750+Crank Horsepower with this type of build, blower, keeping the DCT OEM components, is more than enough, for a few reasons.

1. Keep drivability
2. Can run on 91 pump fuel
3. DCT is holding the power and torque
4. With good tires you can get traction from a 2nd gear roll
5. You will still take most of the cars out there

When you start adding more, points 1-4 will suffer, and I'm not interested in this being a garage queen that I mostly talk about in hypotheticals, I want to drive it as much as possible, turn the key and not worry about anything. You can't make this much power on the stock motor reliably, you just can't, this is the only option and currently the power #'s are actually better than I expected and have seen from any other setup, utilizing these components. I have NO plans to add more and am very happy with the car as is.
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP
ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ
ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ
Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH

Last edited by DLSJ5; 12-02-2012 at 01:18 PM..
Appreciate 0
      10-31-2012, 04:19 PM   #57
flipm3
E46 + E90 + F80
192
Rep
2,894
Posts

Drives: E46 + E90 + F80
Join Date: Jul 2008
Location: Illinois

iTrader: (1)

Garage List
2009 BMW M3  [0.00]
2002 BMW M3  [0.00]
Quote:
Originally Posted by DLSJ5 View Post
I think 750+Crank Horsepower with this type of build, blower, keeping the DCT OEM components, is more than enough, for a few reasons.

1. Keep drivability
2. Can run on 91 pump fuel
3. DCT is holding the power and torque
4. With good tires you can get traction from a 2nd gear roll
5. You will still take most of the cars out there

When you start adding more, points 1-4 will suffer, and I'm not interested in this being a garage queen that I mostly talk about in hypotheticals, I want to drive it as much as possible, turn the key and not worry about anything. You can't make this much power on the stock motor reliably, you just can't, this is the only option and currently the power #'s are actually better than I expected and have seen from any other setup, utilizing these components. I have NO plans to add more and am very happy with the car as is.
This is the exact reason why I respect this build so much. There is no hinderance of realistic drivability and performance. The builds I enjoy following the most are the ones that you can enjoy in pretty much any reasonable situation....not only with crazy drag slicks, not only at the drag strip, not only at track, etc.

__________________
F80 M3 DCT|Alpine White . Black Leather | My Build Thread
E90 M3 DCT|Melbourne Red . Speed Cloth | My Build Thread
E46 M3 6MT|Jet Black . Black Nappa Leather | My Build Thread
Appreciate 0
      10-31-2012, 09:22 PM   #58
ST06M3
Enlisted Member
ST06M3's Avatar
2
Rep
43
Posts

Drives: 2006 BMW M3 ZCP
Join Date: Oct 2009
Location: AZ

iTrader: (0)

Drew, good to see your car up and running well. Those dyno numbers and your setup look solid. Cant wait to see more vids and how you do at the next airstrip event.
Appreciate 0
      10-31-2012, 09:32 PM   #59
1MOREMOD
-
1MOREMOD's Avatar
United_States
11815
Rep
23,187
Posts

Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

iTrader: (5)

Quote:
Originally Posted by DLSJ5 View Post



I think 750+Crank Horsepower with this type of build, blower, keeping the DCT OEM components, is more than enough, for a few reasons.

1. Keep drivability
2. Can run on 91 pump fuel
3. DCT is holding the power and torque
4. With good tires you can get traction from a 2nd gear roll
5. You will still take most of the cars out there

When you start adding more, points 1-4 will suffer, and I'm not interested in this being a garage queen that I mostly talk about in hypotheticals, I want to drive it as much as possible, turn the key and not worry about anything. You can't make this much power on the stock motor reliably, you just can't, this is the only option and currently the power #'s are actually better than I expected and have seen from any other setup, utilizing these components. I have NO plans to add more and am very happy with the car as is.
good to see your happy with it. sounds like you also have your head on straight and arent just out for numbers but real usablity.
__________________

02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|
Appreciate 0
      10-31-2012, 10:59 PM   #60
klammer
Brigadier General
97
Rep
3,246
Posts

Drives: 11 spc gry m3 e90, 19 X5
Join Date: Jan 2010
Location: chicago

iTrader: (0)

Very impressive!!! Can't wait for the videos
__________________
mods: track ready stuff
Appreciate 0
      11-01-2012, 02:03 PM   #61
DLSJ5
Brigadier General
DLSJ5's Avatar
United_States
501
Rep
4,033
Posts

Drives: 2016 F82 M4 ZCP
Join Date: Dec 2006
Location: CA

iTrader: (1)

Quote:
Originally Posted by flipm3 View Post
This is the exact reason why I respect this build so much. There is no hinderance of realistic drivability and performance. The builds I enjoy following the most are the ones that you can enjoy in pretty much any reasonable situation....not only with crazy drag slicks, not only at the drag strip, not only at track, etc.

Thanks Alex, agreed, realistically for what I'm running these #'s are very good and a bit more than I expected with this setup.

Quote:
Originally Posted by ST06M3 View Post
Drew, good to see your car up and running well. Those dyno numbers and your setup look solid. Cant wait to see more vids and how you do at the next airstrip event.
Wish you were going to the event Broski.


Quote:
Originally Posted by chriszeh View Post
good to see your happy with it. sounds like you also have your head on straight and arent just out for numbers but real usablity.
Thanks Chris, appreciate that.

Quote:
Originally Posted by klammer View Post
Very impressive!!! Can't wait for the videos
Thanks, can't wait for the event.
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP
ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ
ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ
Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH
Appreciate 0
      11-01-2012, 02:35 PM   #62
aus
Major General
United_States
887
Rep
9,031
Posts

Drives: Odysse
Join Date: Jul 2005
Location: Seal Beach, CA

iTrader: (10)

Great reasoning on why you built it the way you did.

What changes did you try in the DCT that failed?
Wasn't Sticky doing some work with the DCT? Did that provide any benefit?

.
__________________
Let me get this straight... You are swapping out parts designed by some of the top engineers in the world because some guys sponsored by a company told you it's "better??" But when you ask the same guy about tracking, "oh no, I have a kid now" or "I just detailed my car." or "i just got new tires."
Appreciate 0
      11-01-2012, 03:01 PM   #63
DLSJ5
Brigadier General
DLSJ5's Avatar
United_States
501
Rep
4,033
Posts

Drives: 2016 F82 M4 ZCP
Join Date: Dec 2006
Location: CA

iTrader: (1)

Quote:
Originally Posted by aus View Post
Great reasoning on why you built it the way you did.

What changes did you try in the DCT that failed?
Wasn't Sticky doing some work with the DCT? Did that provide any benefit?

.
Thanks Aus, we're not entirely sure why the DCT failed, whether it was the their clutch packs or something else, it appears now that there is no doubt the DCT ECU needs to be tweaked in order to accept any new type of clutch packs, and myself nor ESS wanted to deal with that.

I've decided their wasn't sufficient evidence that they work without some major R&D and I did not want to go down that road. It's not because you don't want to push the envelope, it has to do with being smart and not wanting your car to be down for an unacceptable amount of time, with the DCT we are still in uncharted waters, and if it holds OEM, why change it. Looking back now the slipping clutch was probably do to all the 1/4 mile runs that I did, and I should have just installed a new OEM clutch, but it's part of the deal with a build like this.

While I love the M3, and don't want another car, you're living in an alternate universe if you think BIG Horsepower is reliable, or even that doable in this platform, unless you drive around with slicks all day. Although currently I've yet to see another M3 dyno higher @ this modest psi level, running this blower.

Currently I have no idea what is going on with Sticky's DCT setup.
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP
ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ
ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ
Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH
Appreciate 0
      11-06-2012, 08:49 AM   #64
SYT_Shadow
///M Powered for Life
SYT_Shadow's Avatar
11403
Rep
10,275
Posts

Drives: E90M/E92M/M4GTSx2/X5M
Join Date: Sep 2010
Location: Greenwich, CT

iTrader: (2)

Quote:
Originally Posted by DLSJ5 View Post
Thanks Aus, we're not entirely sure why the DCT failed, whether it was the their clutch packs or something else, it appears now that there is no doubt the DCT ECU needs to be tweaked in order to accept any new type of clutch packs, and myself nor ESS wanted to deal with that.

I've decided their wasn't sufficient evidence that they work without some major R&D and I did not want to go down that road. It's not because you don't want to push the envelope, it has to do with being smart and not wanting your car to be down for an unacceptable amount of time, with the DCT we are still in uncharted waters, and if it holds OEM, why change it. Looking back now the slipping clutch was probably do to all the 1/4 mile runs that I did, and I should have just installed a new OEM clutch, but it's part of the deal with a build like this.

While I love the M3, and don't want another car, you're living in an alternate universe if you think BIG Horsepower is reliable, or even that doable in this platform, unless you drive around with slicks all day. Although currently I've yet to see another M3 dyno higher @ this modest psi level, running this blower.

Currently I have no idea what is going on with Sticky's DCT setup.
Wise words Drew.

Your objective is similar to mine: get massive HP but within a drivability and reliability envelope that's similar to OEM.

I'm curious how much this cost. As most moving parts were replaced it sounds like an interesting option for someone who's been supercharged for 100k miles and wants to redo all the wear parts to something that will last 200k.

Good luck with the DCT!
Appreciate 0
      12-02-2012, 01:15 PM   #65
DLSJ5
Brigadier General
DLSJ5's Avatar
United_States
501
Rep
4,033
Posts

Drives: 2016 F82 M4 ZCP
Join Date: Dec 2006
Location: CA

iTrader: (1)

Quote:
Originally Posted by SYT_Shadow View Post
Wise words Drew.

Your objective is similar to mine: get massive HP but within a drivability and reliability envelope that's similar to OEM.

I'm curious how much this cost. As most moving parts were replaced it sounds like an interesting option for someone who's been supercharged for 100k miles and wants to redo all the wear parts to something that will last 200k.

Good luck with the DCT!
Agreed, well said.
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP
ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ
ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ
Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH
Appreciate 0
      12-02-2012, 01:22 PM   #66
DLSJ5
Brigadier General
DLSJ5's Avatar
United_States
501
Rep
4,033
Posts

Drives: 2016 F82 M4 ZCP
Join Date: Dec 2006
Location: CA

iTrader: (1)

Just to give you an idea of what kind of gains this build produced, here is my run with Longboarder's VT600, which ran with or beat a lot of fast cars at the event.

Audio is bad in this vid, sorry guys!



Here's from his car -



To give you and idea of how well his car performs, here he is against a Heads/Cam C6 Z06 at the event.

__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP
ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ
ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ
Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH

Last edited by DLSJ5; 12-02-2012 at 01:53 PM..
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:53 PM.




m3post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST