|
|
08-22-2014, 08:16 AM | #68 |
M3/Raptor
48
Rep 302
Posts |
I know this is pretty old, but is there an answer to this? I installed last night to the same spot as the standard seatbelt (under the cover on driver's seat), but the anchor digs into the seat bolster badly. Wondering if it is ok to bend the anchor away from the seat?
|
Appreciate
0
|
08-22-2014, 09:36 AM | #69 |
Major
115
Rep 1,470
Posts |
Bend the tab as necessary but no more than 90 degrees in any direction. I remove the outboard seat mounting bolt just under the driver seat. Slip the stubby end Schroth piece under the rail, and bolt it back down. It rubs nothing.
__________________
Stoptech 380mm/355mm | PFC08 / Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | MCS 2-way with 700/1000lb springs | Solid bushings and adjustable links | RD front swaybar | Apex EC-7 18x10 square 275/35-18 NT01 | Turner Race Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Alekshop Oil Cooler | Performance Steering Wheel | | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit Pro | Turner Steering Rack Stops | Vorshlag Camber Plates
|
Appreciate
0
|
08-22-2014, 12:19 PM | #70 |
First Lieutenant
16
Rep 308
Posts |
Thanks that incredibly helpful! (I still haven't installed mine but now that I know I will)
|
Appreciate
0
|
09-25-2014, 11:14 AM | #71 | |
Registered
0
Rep 1
Posts |
Quote:
I found a link to the TIS removal instructions here: <http://www.e90post.com/forums/showthread.php?t=794807>, but a) the diagrams are not terribly clear, b) they're for an E92 so may not be accurate for E90. Last edited by zmans3; 09-25-2014 at 02:48 PM.. |
|
Appreciate
0
|
09-25-2014, 03:40 PM | #72 | |
Private
9
Rep 87
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|