Work Meisters S1 3pc

[ronn16E90]

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

****PRICE DROP***
2800 + shipping OBO.. LOCAL BUYER PREFERRED

Wheels TPMS and Tires!!

Need to be all of them since I don’t have use for tires anymore


Solid 8/10 IMO

Finish is burning black (Gunmetal OEM works)
with Anodized polish lip.

Bolt pattern: 5x120

Front
19x8.5 ET+29 Disk A ( +20mm spacer)
245/35/19 Pirelli P zero Nero from tirerack ( about 75% car is only driven twice every month)
TPMS from Apex Race parts

Rear
19x10.5 ET+23 Disk O ( No spacer needed)
305/30/19 Bridgestone Potenza Pole position XL from tirerack ( about 75% car is only driven twice every month)
TPMS from Apex Race parts

I have 3 pcs of wheel caps and missing one. As you know, Work does not make center caps for these wheels so I needed to make one. The red wheel cap they sell on their website are only the Red/ Gold combo. The one I have are limited Red/ Silver thats why I cannot make another one to complete the set.

No need to roll and no rubbing, Im lowered with KW HAS




TPMS and tires are bought around 2015. I can provide receipts

I really prefer a local buyer so they can inspect the wheel before purchasing it since I do not want to mislead any buyers but what you see is what you get.

PLEASE Do not be shy, give me a DECENT offer. The worst that I could say is NO.



Here are links of my car with the wheels mounted

http://www.m3post.com/forums/showthread.php?t=1061334

http://www.m3post.com/forums/showthread.php?t=1124928

[becausephilchow]

Just FYI, for any interested buyers, you could throw in a 1" Larger front lip, and you'd have a 9.5" Wheel, which would fit, and you wouldn't need the spacer anymore.

[ronn16E90]

Originally Posted by becausephilchow

Just FYI, for any interested buyers, you could throw in a 1" Larger front lip, and you'd have a 9.5" Wheel, which would fit, and you wouldn't need the spacer anymore.

I think the issue on those are the barrel that needs to be replaced for the spacer issue

[MattM3SVT]

Bump for awesome seller!

[becausephilchow]

Originally Posted by ronn16E90

I think the issue on those are the barrel that needs to be replaced for the spacer issue

It shouldn't.

8.5 +29 is essentially the same specs as the 220M Front.

[ronn16E90]

Originally Posted by becausephilchow

It shouldn't.

8.5 +29 is essentially the same specs as the 220M Front.

Correct me if I am wrong, but how about the clearance of the barrel itself and the strut? I mean you can change the width of the outer lip to anything but the other half of the wheel will stay the same unless you shorten the barrel and increase outer lip size right?

[becausephilchow]

Originally Posted by ronn16E90

Correct me if I am wrong, but how about the clearance of the barrel itself and the strut? I mean you can change the width of the outer lip to anything but the other half of the wheel will stay the same unless you shorten the barrel and increase outer lip size right?

If the wheel is 8.5 +29 to begin with, then that wouldn't have inner strut clearance problems anyways. That's the same inner clearance as an OEM 220M Front Wheel.

So, by changing the width of the outer lip, you would essentially be widening the wheel, and only changing the outer clearance, not the inner clearance.

For example, if lets say, it's a 2" Lip on the 8.5 +29.

Meisters are sandwich mounted IIRC, so, that means that the barrel is 6", and the face itself accounts for 0.5"

So, it's:

6" Barrel
0.5" Face
2.0" Lip

Total 8.5" Width with 29 Offset (Just an hypothetical situation)

If you change it to these specs, you get:

6" Barrel
0.5" Face
3.0" Lip

Total 9.5" Width with 16 Offset

Which, is still suitable for an E9X Front, even with a 275/30/19 if you so chose to run.

[ronn16E90]

Originally Posted by becausephilchow

If the wheel is 8.5 +29 to begin with, then that wouldn't have inner strut clearance problems anyways. That's the same inner clearance as an OEM 220M Front Wheel.

So, by changing the width of the outer lip, you would essentially be widening the wheel, and only changing the outer clearance, not the inner clearance.

For example, if lets say, it's a 2" Lip on the 8.5 +29.

Meisters are sandwich mounted IIRC, so, that means that the barrel is 6", and the face itself accounts for 0.5"

So, it's:

6" Barrel
0.5" Face
2.0" Lip

Total 8.5" Width with 29 Offset (Just an hypothetical situation)

If you change it to these specs, you get:

6" Barrel
0.5" Face
3.0" Lip

Total 9.5" Width with 16 Offset

Which, is still suitable for an E9X Front, even with a 275/30/19 if you so chose to run.

Gotcha. Thanks for the info!

[trex8000]

Where r u located? Interested in a trade for some deep offset forgestar f14 in black chrome n cash?😇

[ronn16E90]

Originally Posted by trex8000

Where r u located? Interested in a trade for some deep offset forgestar f14 in black chrome n cash?😇

Sacramento. I'll pass on the trade. Thanks tho

[ronn16E90]

Offer up guys!

[shimmy23]

do you know where someone can source new lips? last i heard, the 19" meister lips were nearly impossible to find replacements for?

[ronn16E90]

Originally Posted by shimmy23

do you know where someone can source new lips? last i heard, the 19" meister lips were nearly impossible to find replacements for?

Pmd you buddy

[M3AN_S65]

Originally Posted by ronn16E90

bump

Im looking for some BBS wheels. You have any for sale? 18"s E88.

[ronn16E90]

Originally Posted by M3AN_S65

Im looking for some BBS wheels. You have any for sale? 18"s E88.

I do. Ill trade it for a 4.4 L

[itsnotq]

Bump

[ronn16E90]

Bump price lowered

[ronn16E90]

bump

[ronn16E90]

Sold! Thank you everyone

[GORDON.M3]

if you dont mind me asking where did you get those red center caps for the meisters?