Rub / No Rub Index

1MOREMOD · 01-18-2013, 10:45 PM

rub.

1MOREMOD · 01-18-2013, 10:46 PM

no rub.

mdosu · 01-18-2013, 10:57 PM

Quote:

Originally Posted by chriszeh

rub.

I see they use 1mm spacers...

1MOREMOD · 01-18-2013, 11:04 PM

Quote:

Originally Posted by mdosu

I see they use 1mm spacers...

might need more than that.

mdosu · 01-18-2013, 11:05 PM

Quote:

Originally Posted by chriszeh

might need more than that.

i've got a plug that can patch up any holes for those tires.

1MOREMOD · 01-18-2013, 11:06 PM

Quote:

Originally Posted by mdosu

i've got a plug that can patch up any holes for those tires.

yeah i might need some extra help on this one.

Mr. ///M3 RD · 01-27-2013, 10:32 AM

Quote:

Originally Posted by 1MOREMOD

rub.

Quote:

Originally Posted by 1MOREMOD

no rub.

Quote:

Originally Posted by mdosu

I see they use 1mm spacers...

Quote:

Originally Posted by 1MOREMOD

might need more than that.

Quote:

Originally Posted by mdosu

i've got a plug that can patch up any holes for those tires.

Quote:

Originally Posted by 1MOREMOD

yeah i might need some extra help on this one.

PS. Mine are all STOCK and I never deviate from that so I never loose sleep about rubbing (after I rub I mean Hahaha).

mdosu · 01-27-2013, 09:13 PM

Quote:

Originally Posted by 1MOREMOD

yeah i might need some extra help on this one.

Quote:

Originally Posted by M3RD

PS. Mine are all STOCK and I never deviate from that so I never loose sleep about rubbing (after I rub I mean Hahaha).

happy to entertain you rolf, that's what we're here for.

1MOREMOD · 01-27-2013, 09:29 PM

Quote:

Originally Posted by mdosu

happy to entertain you rolf, that's what we're here for.

taking a break from entertaining yourself?

mdosu · 01-27-2013, 09:34 PM

Quote:

Originally Posted by 1MOREMOD

taking a break from entertaining yourself?

no, recent postings in rub / no-rub is sufficient

Maximusdafarmer · 01-27-2013, 09:57 PM

Car: E92 M3

Wheels: VMR V710 19x11 ET25 / 19x10 ET25

Spacers: None

Tires / Miles: Michelin PSS, 295/30/19 and 265/35/19

Suspension: H&R Coilovers, adjusted about halfway down

EDC Setting: N/A

Fender Modifications: None

Rubbing?: Occasionally on a large bump I hear a thunk in the rear... happens unloaded or fully loaded four adults...but even four adults does not make it rub any other time, turns dips etc, so far no visible wear/ damage on tires or fenders

nrand001 · 01-28-2013, 08:29 PM

2011 E93 M3
Stock OEM Wheels

F: 245/35/19 (Continentals)
R: 295/30/19 (Yoko Advan Neova) ( I know, I'm pushing it on a 9.5 OEM wheel)

Spacers: 15mm (rear) and 18mm (front)

*Right rear side was way too close to the fender so took out rear and front spacers (macht schnell) today. No problems in the rear now. Debating on putting either the 18mm or 15mm only in the front.

Fender modifications: None

Rubbing: Not anymore!

kolahib001 · 01-30-2013, 06:08 PM

Hello everyone. I'm a noob and I need your help.
I have a 2011 Black M3 sedan with competition package.
I purchased 19" Avant Garde M359 et18 front & et25 rear....I believe.
I'm now shopping for tires.
Have my eyes set on the Michelin pilot super sports.
Want to get your feedback on the tire set up: 255/35/19 front and 275/35/19 rear.....
Your thoughts?

Gil@McKennaPerformance · 01-30-2013, 06:26 PM

Quote:

Originally Posted by kolahib001

Hello everyone. I'm a noob and I need your help.
I have a 2011 Black M3 sedan with competition package.
I purchased 19" Avant Garde M359 et18 front & et25 rear....I believe.
I'm now shopping for tires.
Have my eyes set on the Michelin pilot super sports.
Want to get your feedback on the tire set up: 255/35/19 front and 275/35/19 rear.....
Your thoughts?

That is standard Avant Garde M359 wheel/ offset size for the E9X M3 chassis and you'll have no problems with rubbing at all.

kolahib001 · 01-30-2013, 06:54 PM

Quote:

Originally Posted by Gil@McKennaPerformance

That is standard Avant Garde M359 wheel/ offset size for the E9X M3 chassis and you'll have no problems with rubbing at all.

Thank you very much!
Off to go buy the tires now.

mot · 02-02-2013, 10:28 AM

Quote:

Originally Posted by m3heaven

Car: 2011 E92 M3

Wheels w/ Offsets: APEX ARC8 - (F) 18x10 +13 (R) 18x10 +20

Spacers: 12mm Front, 5mm Rear

Tires / Miles: Hankook RS3 275/35/18 Square

Suspension: KW V3 + GC Camber Plates

EDC Setting: N/S

Alignment: (F) -2.5 (R) -2

Fender Modifications: (F) None (R) None

Rubbing?: None

Have you tried this setup with 10mm in the rear?

1MOREMOD · 02-02-2013, 09:38 PM

ran my apex ec7 with nt01 275-35-18 and 12mm spacer in the rear on the track today without rubbing good for me since i dont want to pull those suckers every time i switch wheels at the track.

kwike92 · 02-03-2013, 11:18 AM

Quote:

Originally Posted by lm1z

2010 E92

Stock Rims
19x8.5, 245/35/19 Continental CS3's
19X9.5, 285/35/19 Michelin PS2's

H&R Sport springs.

No rubbing.

Are you running spacers in the rear if so what size?

M3V8Cabrio · 02-03-2013, 04:40 PM

What about the stock Comp wheels? How wide can you go with rear PSS tires?

Chris M4CS · 02-04-2013, 06:30 PM

Car: 2011 E92 M3

Wheels w/ Offsets: Morr VS8.2 - (F) 19x9 +22 (R) 19x10 +20

Spacers: None Front, None Rear

Tires / Miles: Michelin PSS, Front 255/35-19 Rubbing (returned)
Front 245/35-19 No Rubbing
Rear 275/35-19 No Rubbing

Suspension: Stock EDC, No Comp Package

EDC Setting: N/S

Alignment: Factory

Fender Modifications: (F) None (R) None

Rubbing?: None with 245 front, yes with 255 fronts

mot · 02-04-2013, 10:02 PM

Quote:

Originally Posted by 1MOREMOD

ran my apex ec7 with nt01 275-35-18 and 12mm spacer in the rear on the track today without rubbing good for me since i dont want to pull those suckers every time i switch wheels at the track.

Nice man! I am consider PSS in 275/35/18 for 18x10 et25. I have 12/15 spacers now and would like to keep them on. I am curious to see if anyone tried this exact setup and if you rub.

808MGuy · 02-10-2013, 01:34 AM

Quote:

Originally Posted by 808MGuy

Car: 09 E90

Wheels w/ Offsets: HRE P40 - (F) 20x9 +28, (R) 20x10.5 +28

Spacers: None

Tires / Miles: Vredestein - (F) 255/30/20, (R) 285/30/20; New Tires

Suspension: Eibach

Alignment: (F) Factory spec (R) Factory spec

Fender Modifications: (F) None (R) None

Rubbing?: None

After 32k miles on the Vreds I finally replaced those rock hard, noisy tires. Actually, they were quite soft and quiet until about 10k miles ago and I could have got at least 5k more miles out of them but the noise was just driving me crazy already. So they were replaced with Michelin PS2s today and I'm happy to say still no rubbing. Here's the new specs:

Wheels w/ Offsets: HRE P40 - (F) 20x9 +28, (R) 20x10.5 +28

Spacers: None

Tires / Miles: Michelin PS2 - (F) 255/30/20, (R) 305/25/20

Suspension: Eibach

Alignment: (F) Factory spec (R) Factory spec

Fender Modifications: (F) None (R) None

Rubbing?: None

01-18-2013, 10:45 PM	#133
1MOREMOD - 11817 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	rub. Attached Images __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC bars\|GC race control arms\|GC bushings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster\|Euro header\|BW exhaust\|K&N c.a.i.\|Epic race tune\|Rouge pulleys\|Seibon CF hood\|CSL bumper\|apr gt 250 & splitter\|ST-40\|XR-2\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|BMWpedals\|BW studs\|
	Appreciate 0 Quote

01-18-2013, 10:46 PM	#134
1MOREMOD - 11817 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	no rub. Attached Images __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC bars\|GC race control arms\|GC bushings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster\|Euro header\|BW exhaust\|K&N c.a.i.\|Epic race tune\|Rouge pulleys\|Seibon CF hood\|CSL bumper\|apr gt 250 & splitter\|ST-40\|XR-2\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|BMWpedals\|BW studs\|
	Appreciate 0 Quote

01-27-2013, 09:57 PM	#143
Maximusdafarmer Private 6 Rep 78 Posts Drives: 2008 E92 M3 6MT Join Date: Nov 2012 Location: Tampa, Fl iTrader: (0)	Car: E92 M3 Wheels: VMR V710 19x11 ET25 / 19x10 ET25 Spacers: None Tires / Miles: Michelin PSS, 295/30/19 and 265/35/19 Suspension: H&R Coilovers, adjusted about halfway down EDC Setting: N/A Fender Modifications: None Rubbing?: Occasionally on a large bump I hear a thunk in the rear... happens unloaded or fully loaded four adults...but even four adults does not make it rub any other time, turns dips etc, so far no visible wear/ damage on tires or fenders __________________ E92 M3 - Borla racing midpipe/ ATAK Catback Exhaust, Macht Schnell Stage 2 CAI, Macht Schnell Pulleys, AA Tune, H&R Coilovers, Gloss Black VMR 19X11/19X10, OSS Headlights, Satin Black Last edited by Maximusdafarmer; 03-20-2013 at 01:36 AM..
	Appreciate 0 Quote

01-28-2013, 08:29 PM	#144
nrand001 nrand001 0 Rep 15 Posts Drives: 2011 E93 M3 Join Date: Jan 2013 Location: Victorville, CA iTrader: (0)	2011 E93 M3 Stock OEM Wheels F: 245/35/19 (Continentals) R: 295/30/19 (Yoko Advan Neova) ( I know, I'm pushing it on a 9.5 OEM wheel) Spacers: 15mm (rear) and 18mm (front) *Right rear side was way too close to the fender so took out rear and front spacers (macht schnell) today. No problems in the rear now. Debating on putting either the 18mm or 15mm only in the front. Fender modifications: None Rubbing: Not anymore!
	Appreciate 0 Quote

01-30-2013, 06:08 PM	#145
kolahib001 New Member 0 Rep 15 Posts Drives: 2011 M3 Sedan Join Date: Jan 2013 Location: Maui iTrader: (0)	Hello everyone. I'm a noob and I need your help. I have a 2011 Black M3 sedan with competition package. I purchased 19" Avant Garde M359 et18 front & et25 rear....I believe. I'm now shopping for tires. Have my eyes set on the Michelin pilot super sports. Want to get your feedback on the tire set up: 255/35/19 front and 275/35/19 rear..... Your thoughts?
	Appreciate 0 Quote

02-02-2013, 09:38 PM	#149
1MOREMOD - 11817 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	ran my apex ec7 with nt01 275-35-18 and 12mm spacer in the rear on the track today without rubbing good for me since i dont want to pull those suckers every time i switch wheels at the track. __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC bars\|GC race control arms\|GC bushings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster\|Euro header\|BW exhaust\|K&N c.a.i.\|Epic race tune\|Rouge pulleys\|Seibon CF hood\|CSL bumper\|apr gt 250 & splitter\|ST-40\|XR-2\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|BMWpedals\|BW studs\|
	Appreciate 0 Quote

02-03-2013, 04:40 PM	#151
M3V8Cabrio M3 God 4 Rep 40 Posts Drives: 2011 E93 M3 MCB Join Date: Feb 2012 Location: Littleton, CO iTrader: (0)	What about the stock Comp wheels? How wide can you go with rear PSS tires?
	Appreciate 0 Quote

02-04-2013, 06:30 PM	#152
Chris M4CS First Lieutenant 27 Rep 313 Posts Drives: 2019 BMW M4CS Join Date: Jun 2011 Location: Oklahoma City iTrader: (0)	Car: 2011 E92 M3 Wheels w/ Offsets: Morr VS8.2 - (F) 19x9 +22 (R) 19x10 +20 Spacers: None Front, None Rear Tires / Miles: Michelin PSS, Front 255/35-19 Rubbing (returned) Front 245/35-19 No Rubbing Rear 275/35-19 No Rubbing Suspension: Stock EDC, No Comp Package EDC Setting: N/S Alignment: Factory Fender Modifications: (F) None (R) None Rubbing?: None with 245 front, yes with 255 fronts
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search