♦ Sonic MS | Forgestar F14 Flow-Formed Cast Wheels

[Cal@Sonic MS]

Sonic Motorsports
1045 West El Camino Real
Mountain View, CA 94040
tel: 650-733-6506
fax: 650-691-9009
email: info@sonicms.net

Presenting the ultra light, yet affordable one piece flow-formed cast Forgestar F14 wheels. These wheels are made to order with custom offsets available, to fit your E9X M3 perfectly without the need for spacers or fender adjustments.

Available Finishes:

• Gunmetal
• Brushed Titanium
• Piano Black
• Matte Black
• Bronze Gold

* Custom finishes available upon request, please contact me directly for more information.




Wheel Weights Information

• 18x8.5 - 17.6 lbs
• 18x9.5 - 18.4 lbs

* For 19 inch wheels, add approximately 2.5/3 lbs for 19x8.5/19x9.5
* For 20 inch wheels, add approximately 4.5-5 lbs for 20x9/20x10.


Rotary Forged / Flow Formed Cast - Technical Information
This specialized process begins with a low pressure type of casting and uses a special machine that spins the initial casting, heats the outer portion of the casting and then uses steel rollers pressed against the rim area to pull the rim to its final width and shape. The combination of the heat, pressure and spinning create a rim area with the strength similar to a forged wheel. During Flow Forming, the pressure applied to the cast rim actually changes its mechanical properties, so its strength and impact values become similar to those of a forged rim. That translates to up to 15% less weight when compared to a standard cast wheel. The resulting grain structure within the alloy of the wheel is linear, flowing in a single direction.

Click Here to View Test Reports from Independent Third Party Test Labs


Recommended Fitment for the E9X M3.

19x8.5 ET20
19x9.5 ET15-20
245/35/19
285/30/19

20x8.5 ET20
20x10.5 ET15-20
245/30/20
285/30/20

We also offer full rim and tire packages including OEM TPM sensors. We utilize the Hunter Road Force GSP9700 Balancer and “Touch-less” Auto 34 Mounting Machine to mount and balance your rims and tires safely and effectively, without risking any damage to your new investment.

Recommended Tires:
*Please click on link for more information on the tire, including pricing.


Hankook Ventus V12 evo K110

19 inch setup
20 inch setup

Continental ExtremeContact DW

19 inch setup


Yokohama ADVAN Sport

19 inch setup
20 inch setup



MSRP Pricing:
18 inch - $1760/set
19 inch - $2000/set
20 inch - $2560/set

For best pricing and ordering information, please call me at 650.733.6506, email at cal@sonicms.net or shoot me a PM.


Store Hours:
Mon-Fri : 10AM-7PM PST
Sat: 12PM-5PM PST

Payments:

We accept all major Credit Cards, in addition to PayPal and Certified Cashiers Checks / Money Orders.


We also offer professional on-site installation services for customers local to the SF Bay Area. Please contact us directly for more information.

[N8dawg]

Does the BMW roundel fit or do they need a conversion?

[Cal@Sonic MS]

Originally Posted by N8dawg

Does the BMW roundel fit or do they need a conversion?

BMW blue/white roundels would be provided by Forgestar and we will provide them at no additional charge for every order (upon request).

[N8dawg]

I did some research and found that the offsets may be limited in customization. Is it possible to get 18x9.5 ET 23 (OEM setup)?

[Cal@Sonic MS]

Originally Posted by N8dawg

I did some research and found that the offsets may be limited in customization. Is it possible to get 18x9.5 ET 23 (OEM setup)?

No unfortunately the lowest ET is 26 for 18x9.5. However, you can do 18x10 rear which is more desirable anyhow.
Here are the available offset ranges / sizes.

* 18×8.5 offsets from +26 to +50
* 18×9.0 offsets from +20 to +55
* 18×9.5 offsets from +26 to +60
* 18×10 offsets from +16 to +42
* 18×11 offsets from +23 to +55
* 18×12 offsets from +36 to +68

* 19x8.5 offsets from +26 to +48
* 19x9.0 offsets from +20 to +55
* 19x10 offsets from +20 to +44
* 19x11 offsets from +23 to +55

* 20×8.5 offsets from +26 to +50
* 20×9.0 offsets from +18 to +56
* 20×9.5 offsets from +7 to +43
* 20×10 offsets from +31 to +69
* 20×10.5 offsets from +20 to +55
* 20×11 offsets from +48 to +81
* 20×12 offsets from +39 to +75

[Cal@Sonic MS]

Few pics of one of our customer's M3 with F14 in brushed silver.

[Cal@Sonic MS]

[GOLFFRR]

those looks sick guys!

[Cal@Sonic MS]

F14s as featured on our Project MR E92 M3.

[Cal@Sonic MS]

19×9 Front
19×10 Rear
Gunmetal F14 on E90 M3.

[Cal@Sonic MS]

20×9 Front
20×10.5 Rear
Brushed Titanium.

[Cal@Sonic MS]

19x9 Front 245/35/19
19x10 Rear 285/30/19

[Cal@Sonic MS]

Sun Gold Finish

[Merked M3]

I am getting a set of these, you have a PM!! Also feel free to email me if that's easier at danfortner@snet.net

[Cal@Sonic MS]

Originally Posted by Merked M3

I am getting a set of these, you have a PM!! Also feel free to email me if that's easier at danfortner@snet.net

Thank you for your order Dan!

[Twinbo]

Any pics of an e92 with the Gold F14s?

Any photoshop artists out there willing to show off their skills?

[Cal@Sonic MS]

Originally Posted by Twinbo

Any pics of an e92 with the Gold F14s?

Any photoshop artists out there willing to show off their skills?

Unfortunately no I don't believe there are any pics out there of an E9X M3 with Gold F14s...not yet at least.

[Cal@Sonic MS]

[positiveions]

gunmetal color is bombb

[Cal@Sonic MS]

[Cal@Sonic MS]

"Semi-Gloss Black" Finish

[Cal@Sonic MS]

Custom Finish - Matte Black with Brushed Aluminum Face.