|
|
11-26-2010, 07:32 PM | #47 | |
Lieutenant Colonel
746
Rep 1,848
Posts |
Quote:
I had to follow the youtube version to get the vents out. I could not get the OP way to work. |
|
Appreciate
0
|
02-01-2011, 07:58 PM | #48 | |
Banned
38
Rep 936
Posts |
Quote:
|
|
Appreciate
0
|
02-09-2011, 01:28 PM | #52 |
Putcha ang ganda...
281
Rep 5,441
Posts |
i just did this MOD and damn it was so easy....
here are the things you need 1. quick dry matte black paint 2. 400 grit sandpaper (sand it until its dull, get all the chrome out) 3. 3M green tape to cover the ///M logo (no need to take them out) 4. Cover the ///M logo with the 3M tape 5. exacto knife (cut the 3M tape so it will cover the ///M sticker) 6. Hang the side gills or put them on the ground but before putting them on the ground make sure your in a secluded area so dust particles wont stick on what your painting. 7. start painting from right to left and left to right apply a 1st coat of paint and let it dry then this the same thing until its good amount of paint make sure not to paint it too much cause you might have a run... 8. let it dry assemble 9. install.. 10. DONE... this took me 30 minutes as i have a quick easy dry paint so from removing to install just took me that quick.... TOTAL COST $15 bucks... WORTH IT? heck yea ill post photo once i get home
__________________
|
Appreciate
0
|
09-11-2015, 09:30 PM | #53 |
New Member
2
Rep 5
Posts |
E92 / E93 M3 Side Marker Removal instructions
Please see the attachment for BMW repair instructions.
BMW recommends the following special tool to remove the side markers: Part # 90-88-6-641-020 or Part # 83-30-0-493-681 Replacement bulbs for the side marker: OEM Part # 63-21-7-160-798 or OSRAM Bulb 2827 WY5W |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|