▀▄ eas - e9x remoteKEY+ project information

[tom @ eas]

Originally Posted by doba_s

Good job guys !

So, how can I do that ? Does my current module need to be upgraded ? If yes, how can it be done ?

non-Plus modules can get the door handle mirror folding option , we had this added in about 45 days ago. The module will need to be returned for flashing, just give me a call or PM and I'll get things taken care of.

The nice thing about the Plus modules is the integrated USB port - all updates can be now performed by the end user.

[doba_s]

Originally Posted by tom @ eas

non-Plus modules can get the door handle mirror folding option , we had this added in about 45 days ago. The module will need to be returned for flashing, just give me a call or PM and I'll get things taken care of.

The nice thing about the Plus modules is the integrated USB port - all updates can be now performed by the end user.

Ok,

sending you pm ...

Thanks.

[novablackm3]

whoo hoo just got mine in, planning to install this weekend!

can u also post a pic of the firewall that it needs to go through

[leJUNd]

Is this ready product? I couldn't find remotekey+ module with alarm option on EAS website...

[novablackm3]

Originally Posted by accordingi2ime

Is this ready product? I couldn't find remotekey+ module with alarm option on EAS website...

i ordered through jesal @ project 808. email info@project-808.com

and installed it myself except not sure how to get the alarm buzzer into the engine bay..

give him a PM.

[srcstc]

Originally Posted by novablackm3

i ordered through jesal @ project 808. email info@project-808.com

and installed it myself except not sure how to get the alarm buzzer into the engine bay..

give him a PM.

How much?

[tom @ eas]

Originally Posted by accordingi2ime

Is this ready product? I couldn't find remotekey+ module with alarm option on EAS website...

Ready on models that are prewired for an alarm, non-prewired harnesses should be completed shortly.

We just got back from SEMA, website will be updated soon.

[novablackm3]

Originally Posted by tom @ eas

Ready on models that are prewired for an alarm, non-prewired harnesses should be completed shortly.

We just got back from SEMA, website will be updated soon.

i have a 2010 with no prewire for alarm and works other than the alarm clown noise blinking.

[tom @ eas]

Originally Posted by novablackm3

i have a 2010 with no prewire for alarm and works other than the alarm clown noise blinking.

It'll work with no problem, but the wiring harness will also activate the blinking LED on the mirror.

[leJUNd]

Originally Posted by tom @ eas

Ready on models that are prewired for an alarm, non-prewired harnesses should be completed shortly.

We just got back from SEMA, website will be updated soon.

I have 09 so I don't have it pre wired right?

[tom @ eas]

Originally Posted by accordingi2ime

I have 09 so I don't have it pre wired right?

It depends on production date, 03/09+ builds are not prewired if an alarm is not specified at time of ordering.

[Tio///M]

That blows! I wish I would have ordered it then, but I don't remember it being an option when I ordered back in April 09. Mine was built in June 09 but I'm sure I didn't get it. Great!!

[doba_s]

Tom, thanks a lot for re-flashing mine so fast ! I already got it back, but can't find the programing instructions anywhere ...

Can you guys send me a link with the instructions ?

[tom @ eas]

Originally Posted by doba_s

Tom, thanks a lot for re-flashing mine so fast ! I already got it back, but can't find the programing instructions anywhere ...

Can you guys send me a link with the instructions ?

Sure, PM me your email and I'll send them on over.

[novablackm3]

Originally Posted by tom @ eas

It'll work with no problem, but the wiring harness will also activate the blinking LED on the mirror.

is this something extra i have to buy? since i JUST bought assuming it would work.

[tom @ eas]

Originally Posted by novablackm3

is this something extra i have to buy? since i JUST bought assuming it would work.

Give me a PM with your full name and I can notify you as soon as the new harness is ready. I'll make sure you're taken care of.

[novablackm3]

eagerly waiting on how to route the alarm from the fuse box into the engine bay. I even took the ECU out today to look around and no luck..

[KKSigs]

Tom sent you a pm regarding reflashing my module. Thanks in advance.

[rwchrist]

How do I know if my 09 E92 M3 was pre-wired? It has a build date of June 09, but it has the "clown nose" mirror.
Thanks

[claykin]

Originally Posted by rwchrist

How do I know if my 09 E92 M3 was pre-wired? It has a build date of June 09, but it has the "clown nose" mirror.
Thanks

If your June 09 car was not ordered with the OEM alarm, then you have no prewiring.

[claykin]

It sure would be nice if alarm type functionality could be added to the RemoteKey+ product. A real siren, shock sensor, glass break, detect open doors....

[tom @ eas]

Originally Posted by claykin

It sure would be nice if alarm type functionality could be added to the RemoteKey+ product. A real siren, shock sensor, glass break, detect open doors....

To be perfectly honest - alarms are a complete waste of money since most people simply ignore an alarm siren - dismissing it as an annoyance. If an experienced thief wants into your car - he will get in.

Most people in the past purchase alarms for (2) features - confirmation chirps when the door is locked and and the blinking mirror LED as a deterrent.

Let's give a possible scenario of 5 M3s parked out front of a nightclub side by side, only 1 out of those 5 have the blinking mirror LED. Most times, the thief will go for the easier target (excluding valuables in plain view inside the vehicle).

You rarely hear of BMWs being stolen, they have a very efficient disable system that works with EWS equipped from factory.

Alarms are simply noisemakers in today's society and will only sound off after the damage has already been done. A suitable deterrent is what's needed and exactly what remoteKEY will provide.