Vishnu 335 meth kit on M3?

[creaminz]

Does anyone know if I can use Vishnu meth kit off 335i on my M3? I am putting ESS SC, want to run some meth...i love that stuff. Good friend of mine has Vishnu meth kit he bought for his 335...just wondering if i can just use that on my m3...

[TMR]

You will need to get a proceed rev3 with the M3 harness. You can use the WW or or do a trunk setup. It works great.

[creaminz]

Originally Posted by TMR

You will need to get a proceed rev3 with the M3 harness. You can use the WW or or do a trunk setup. It works great.

How about Aquamist setup that vendors are selling here? Those runs without proceed or other piggybacks? Isnt Vishnu kit uses same pump from Aquamist?

[pbonsalb]

The Aquamist is great. I run one on my turbo 99 M3, but for octane consistence and cooling. The car is not tuned to take advantage of it, like by raising the timing. The M3 needs to have its timing targets raised to take full advantage of the meth. I run the Procede with meth on my 08 M3. I think Vishnu will redo a 335i kit for an M3 -- someone did it not too long ago.

[Longboarder]

Originally Posted by creaminz

Does anyone know if I can use Vishnu meth kit off 335i on my M3? I am putting ESS SC, want to run some meth...i love that stuff. Good friend of mine has Vishnu meth kit he bought for his 335...just wondering if i can just use that on my m3...

No it will not. The M3 harness is totally different. You would need to send it in to Vishnu to change it out. Shiv confirmed this with me.

If you try to do a WW mount meth kit your are asking for a engine fire. This ain't no 335....a new S65 motor + S/C + install is close to $50,000.

Yes the pumps are all the same.

See my post #24 here. Bottom line is that nobody tunes for meth on ESS S/C M3's. AA will tell you they don't tune for it on their Level 3 kit which comes standard with meth:

http://www.m3post.com/forums/showthr...=868042&page=2

Only a couple ESS S/C M3's run meth...mine and Drew's VT3 are the only one's I'm aware of in SoCal. Install must be done custom and should be done by someone really experienced. MRF Engineering did mine.

Good luck.

[creaminz]

Originally Posted by Longboarder

No it will not. The M3 harness is totally different. You would need to send it in to Vishnu to change it out. Shiv confirmed this with me.

If you try to do a WW mount meth kit your are asking for a engine fire. This ain't no 335....a new S65 motor + S/C + install is close to $50,000.

Yes the pumps are all the same.

See my post #24 here. Bottom line is that nobody tunes for meth on ESS S/C M3's. AA will tell you they don't tune for it on their Level 3 kit which comes standard with meth:

http://www.m3post.com/forums/showthr...=868042&page=2

Only a couple ESS S/C M3's run meth...mine and Drew's VT3 are the only one's I'm aware of in SoCal. Install must be done custom and should be done by someone really experienced. MRF Engineering did mine.

Good luck.

Thanks alot! I saw your post on the other thread and it helped alot!