WTT: 19" Ray's G07EX w/ BRAND NEW Yokahama ADVAN A/S Tires

[DKX4///M]

BIMMERPOST / Classifieds

Asking Price:

USD 2,800.00

Location:

✓ Will Ship

Item Interest

Wheels:

Rays (57 Motorsport) GO7EX (Gramlight)
Front: 19x9.5" ET 25
Rear: 19 x 10.5 ET25
(Super Light Weight!, The rear wheels were 19lbs shipping weight!)

Tires: (BRAND-NEW)

Yokahama Advan Sport A/S

255/35/19
275/35/19


Wheel Condition 8/10 SLIGHT curb rash, Will repair on-demand.

Tire Condition: 10/10 Less than 200 miles

Willing to trade for another set of wheels /tires/TPMS. OPEN to OEM ZCP'S (Any finish)...Tires must be new/close to new

MSRP on these wheels in these specs off European Auto Source is over $4,000 for the wheels alone. Important to note, this Finish is no longer distributed by Ray's USA. Tires were about $900.


Thanks for looking

Pics of the wheels on my car w/ the Hankook Tires...At the end of the thread there are some pics of the new tires.

[DKX4///M]

Pics of the NEW tires.

[Aesonh77]

Did you get my email? I have the dpe sc10 and the alloy technics. Let me know if you're interested or not, thanks.

[DKX4///M]

Originally Posted by Aesonh77

Did you get my email? I have the dpe sc10 and the alloy technics. Let me know if you're interested or not, thanks.

Were you the one with the 3 different sets of wheels you were open to trading...The Gunmetal Advans are beautiful, But I am interested in swapping tires as well...Bottom line I dont want to have to buy new tires, and my rears especially are getting really low, so Im willing to take some cheaper wheels with nice new tires...

If Im mistaken on the wheels, how did you contact me?

[W12x]

Just curious....any fitment/rubbing issues with 265/35 and 285/35? Stock suspension?

[Aesonh77]

I had sent you an email Saturday I think. I had a set of DPE SP SC10, Alloy technics, and OEM 220Ms. Both 20"s with tires. I'll send the email again and try to attach pics to this post as well.

First pic is the DPEs and second is the Alloy Technics, which are pretty lite.

[DKX4///M]

Originally Posted by W12x

Just curious....any fitment/rubbing issues with 265/35 and 285/35? Stock suspension?

Im agressively lowered on RD Sport Springs... Believe it or not the Rears don't rub at all, Suprising bc PSS have very square shoulders...However, Im picky, they look VERY meaty, I may have gone with a 285/30/19 if I could do it again.

The fronts (265s) slightly rub on full lock, but I think its just the ice built up, I just got the car back 2 days ago and only drove it a few times with some snow still on side streets...

[DKX4///M]

Originally Posted by Aesonh77

I had sent you an email Saturday I think. I had a set of DPE SP SC10, Alloy technics, and OEM 220Ms. Both 20"s with tires. I'll send the email again and try to attach pics to this post as well.

First pic is the DPEs and second is the Alloy Technics, which are pretty lite.

Yes. I just responded. I like the Ray's much more, although they are all nice. Check your email. I left my number...

Thanks again

[W12x]

Originally Posted by DKM3Power

Im agressively lowered on RD Sport Springs... Believe it or not the Rears don't rub at all, Suprising bc PSS have very square shoulders...However, Im picky, they look VERY meaty, I may have gone with a 285/30/19 if I could do it again.

The fronts (265s) slightly rub on full lock, but I think its just the ice built up, I just got the car back 2 days ago and only drove it a few times with some snow still on side streets...

Good to know

I have been using my 18 inch TE37 with 255/40/18 and 275/40/18. Thinking about switching back to my G25 and put 255/35/18 and 275/35/19 on them, looks like 265/285 with 35 ratio wouldn't be an issue either, since my suspension is completely stock (ZCP tho).

Just love the look of those G25's too much

[SeanE92]

Trade for ZCP wheels?

[DKX4///M]

Originally Posted by W12x

Good to know

I have been using my 18 inch TE37 with 255/40/18 and 275/40/18. Thinking about switching back to my G25 and put 255/35/18 and 275/35/19 on them, looks like 265/285 with 35 ratio wouldn't be an issue either, since my suspension is completely stock (ZCP tho).

Just love the look of those G25's too much

You might have some minor issues but I would say the perfect tire tizes for ZCP wheels would be 255/275.

While the ZCPs offsets are a little higher and the only rubbing I have gotten at all has been on the outside lip of the wheel, you should be fine but a 285 tire is a little too wide for a 9.5" or 10" rear wheel. It will work but I try to match the inner width of the tire with the width of the wheel. From my experience it decreases the chance of the wheel losing its bead in an abusive situation. You know what I mean?

But 265/285 would add little benefit and just add a few negatives...10mm's wider is less than a 1/2 inch narrower and much more problem free setup IMHO.

[DKX4///M]

Originally Posted by SeanE92

Trade for ZCP wheels?

I wish you were in NY, I would be open to OEM ZCPs w/ better tires than What I have or just wheels for wheels and a little cash...

PM me your proposal? Just remember I cannot be without a car for even a day so it would have to be you sending the set to me first than me sending to you or something along those lines, which unless you have an extra set would not be good for you lol...

IDK, PM me and maybe we can do something....

What kind of tires?

[W12x]

I will put the tires on my 19" Volk G25 wheels, 9.5" front and 10.5" rear, ETs are similar to yours

Originally Posted by DKM3Power

You might have some minor issues but I would say the perfect tire tizes for ZCP wheels would be 255/275.

While the ZCPs offsets are a little higher and the only rubbing I have gotten at all has been on the outside lip of the wheel, you should be fine but a 285 tire is a little too wide for a 9.5" or 10" rear wheel. It will work but I try to match the inner width of the tire with the width of the wheel. From my experience it decreases the chance of the wheel losing its bead in an abusive situation. You know what I mean?

But 265/285 would add little benefit and just add a few negatives...10mm's wider is less than a 1/2 inch narrower and much more problem free setup IMHO.

[DKX4///M]

Delete please

[DKX4///M]

Sale Pending...

[fastguebo]

i will drive up there since i use to live there we could trade. let me know

[DKX4///M]

Originally Posted by fastguebo

i will drive up there since i use to live there we could trade. let me know

Check your PMS I think I texted you back w no answer

[DKX4///M]

[DKX4///M]

[DKX4///M]

Recent pic, after got them powder coated

[DKX4///M]

Questions or concerns call me 6316179991

[Car22]

I know you're looking for black wheels but let me know if you might be interested in these deep dish Forged 1's. Fairly new 245/295 tires. I'm torn to keep or not but really like your rims if you were interested. Understand if you're not.