Who Has The Cheapest ZCP Reps?

GreasyGinzo · 07-11-2011, 11:29 AM

What vendor sells the cheapest ZCP reps?

akh23456 · 07-11-2011, 11:55 AM

i think VMR wheels are the cheapest but i could be wrong.

isugoo · 07-11-2011, 12:01 PM

If you're talking about E46 ZCP wheels, VMR or aluFlugen or whatever guy have them for about 900-1000 price tag. Based on 19x8.5 x 19.9.5 setup, Alu has better (close to oem) concave.

If you're talking about E9X ZCP wheels, eBay has them (19x8.5 et. 20, 19x9.5 et. 20) for about 700 bucks.

calintexas · 07-11-2011, 01:01 PM

Quote:

Originally Posted by GreasyGinzo

What vendor sells the cheapest ZCP reps?

If you plan to do more than park your car and look at it, do yourself and anyone that might ride in your car a favor by reading the following 2 sticky threads:

Wheel Manufacturing Methods: http://www.m3post.com/forums/showthread.php?t=357430

Wheel Performance Standards: http://www.m3post.com/forums/showthread.php?t=353224. Be sure to watch the video in post #9.

It's difficult to beat the combination of durability and quality of the BMW OEM wheels without spending quite a bit more money than you can buy the BMW wheels for. Whatever you buy, you want the wheels to be certified to meet either the JWL/VIA or TUV performance standards.

GreasyGinzo · 07-11-2011, 01:14 PM

Quote:

Originally Posted by calintexas

If you plan to do more than park your car and look at it, do yourself and anyone that might ride in your car a favor by reading the following 2 sticky threads:

Wheel Manufacturing Methods: http://www.m3post.com/forums/showthread.php?t=357430

Wheel Performance Standards: http://www.m3post.com/forums/showthread.php?t=353224. Be sure to watch the video in post #9.

It's difficult to beat the combination of durability and quality of the BMW OEM wheels without spending quite a bit more money than you can buy the BMW wheels for. Whatever you buy, you want the wheels to be certified to meet either the JWL/VIA or TUV performance standards.

When I said cheapest I didn't really mean I want some cheap China ebay shit wheels made of tinfoil or cast iron. I was really asking what forum vendor has the cheapest prices for ZCP reps...like VMR or Avant Garde

Omerta · 07-11-2011, 01:46 PM

the Breyton wheel is $1200 a set.

BMRLVR · 07-11-2011, 03:12 PM

Quote:

Originally Posted by GreasyGinzo

When I said cheapest I didn't really mean I want some cheap China ebay shit wheels made of tinfoil or cast iron. I was really asking what forum vendor has the cheapest prices for ZCP reps...like VMR or Avant Garde

All you are going to get is china crap if you are looking for cheaper than OEM ZCP's..... A set of OEM ZCP wheels can be had from Turner for ~$2200 this month, they are on sale for under $600 each for both the fronts and rears.

isugoo · 07-11-2011, 03:44 PM

Quote:

Originally Posted by GreasyGinzo

When I said cheapest I didn't really mean I want some cheap China ebay shit wheels made of tinfoil or cast iron. I was really asking what forum vendor has the cheapest prices for ZCP reps...like VMR or Avant Garde

If you want good balance between high quality and the reasonable price + NOT made in China wheels, you may want to look for a used set of OEM ZCPs in marketplace.

dank1212 · 07-12-2011, 01:35 AM

i say get the alufelfgen sf-71 i got them no regrets

Quattro98 · 07-12-2011, 10:26 PM

Quote:

Originally Posted by isugoo

If you want good balance between high quality and the reasonable price NOT made in China wheels, you may want to look for a used set of OEM ZCPs in marketplace.

+1

kitw · 07-13-2011, 12:11 AM

Seriously. I picked up both of the sets of factory pressure cast ZCP wheels for $1600-$1800. Man up and don't run cheap crap, get factory wheels.

isugoo · 07-13-2011, 12:56 AM

Quote:

Originally Posted by kitw

Seriously. I picked up both of the sets of factory pressure cast ZCP wheels for $1600-$1800. Man up and don't run cheap crap, get factory wheels.

07-11-2011, 11:29 AM	#1
GreasyGinzo Captain 41 Rep 635 Posts Drives: '08 E92 AW 6MT M3(Totaled) Join Date: Dec 2010 Location: North Jersey iTrader: (1)	Who Has The Cheapest ZCP Reps? What vendor sells the cheapest ZCP reps? __________________
	Appreciate 0 Tweet Quote

07-11-2011, 11:55 AM	#2
akh23456 All I do is Win... Eat Race Sleep 152 Rep 2,184 Posts Drives: 2018 Range 2011 M3 2019 600lt Join Date: Mar 2009 Location: South Jersey iTrader: (2) Garage List 2019 McLaren 600 LT [0.00] 2011 e90 M3 [0.00] 2018 Range Rover Au ... [0.00]	i think VMR wheels are the cheapest but i could be wrong. __________________ Rs7 : 10.4 133.50 with a 1.7 60ft Toyo R888 F10 M5: 11.308 131.96 with a 1.9 60ft Street Tires E90 M3: 11.2 126.7 with a 1.8 60ft Street Tires
	Appreciate 0 Quote

07-11-2011, 12:01 PM	#3
isugoo Major General 247 Rep 6,125 Posts Drives: 991.2 GTS Join Date: Feb 2008 Location: Irvine, CA iTrader: (73)	If you're talking about E46 ZCP wheels, VMR or aluFlugen or whatever guy have them for about 900-1000 price tag. Based on 19x8.5 x 19.9.5 setup, Alu has better (close to oem) concave. If you're talking about E9X ZCP wheels, eBay has them (19x8.5 et. 20, 19x9.5 et. 20) for about 700 bucks. __________________ PAST: F80 M3 ZCP \| 911.1 C2S \| F10 M5 ZCP \| E70 X5M \| E90 M3 \| E46 M3 \| E36 M3
	Appreciate 0 Quote

07-11-2011, 01:46 PM	#6
Omerta rev limiter abuser 7 Rep 274 Posts Drives: '11 E90 M3 Join Date: Nov 2010 Location: Chicago iTrader: (1)	the Breyton wheel is $1200 a set. __________________ Showing or promising no abatement of severity, intensity, strength, or pace.
	Appreciate 0 Quote

07-13-2011, 12:11 AM	#11
kitw Colonel 471 Rep 2,991 Posts Drives: F91 M8, 991.2 GT3 Join Date: Jun 2007 Location: Bay Area, CA iTrader: (20)	Seriously. I picked up both of the sets of factory pressure cast ZCP wheels for $1600-$1800. Man up and don't run cheap crap, get factory wheels. __________________ DSC_3369 by Kit W, on Flickr
	Appreciate 0 Quote

07-12-2011, 01:35 AM	#9
dank1212 Private 7 Rep 54 Posts Drives: e92 2010 melbourne red m3 Join Date: Apr 2011 Location: upper saddle river, nj iTrader: (0)	i say get the alufelfgen sf-71 i got them no regrets
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search