BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > DIY Guides/ Discussions
 
Evolve Automotive
Post Reply
 
Thread Tools Search this Thread
      03-16-2014, 12:53 PM   #111
420hp
0
New Member
 
420hp's Avatar
 
Drives: 2009 E92 M3 Alpine Carbon Fox
Join Date: Aug 2010
Location: USA

Posts: 10
iTrader: (0)

Plug change

Quote:
Originally Posted by 420hp View Post
TxStig : Still have any left?
Took 1.5 hours. all that I needed for the coils were an X large screwdriver to carefully fulcrum out. and the coat hanger loop for a few of them. Just twist the coils first to loosen seal and get them out.

I also recommend a magnetic spark plug tool( found on this forum). Besides that, just need a few different size extensions and some common sense.

Stealership wanted $550, I did it for the cost of plugs( $80).

My plugs were pretty worn and arched ( 45k mile since last change) , the change really helped the idle ad throttle response.
420hp is offline  
Appreciate 0
Reply With Quote
      03-26-2014, 10:27 PM   #112
TxStig
1
Private First Class
 
Drives: 2008 E92 M3 Jerez Black
Join Date: Aug 2012
Location: Houston, TX

Posts: 111
iTrader: (2)

I heard a rumor these may be available on a site owned by Jeff Bezos pretty soon....
TxStig is offline   United_States
Appreciate 0
Reply With Quote
      07-11-2014, 11:37 PM   #113
da jemster
0
New Member
 
da jemster's Avatar
 
Drives: E46 M3, E93 M3
Join Date: Sep 2013
Location: United States

Posts: 20
iTrader: (0)

Just finished mine. Salamat for the write-up.
da jemster is offline  
Appreciate 0
Reply With Quote
      07-12-2014, 06:04 AM   #114
AlexTek
3
First Lieutenant
 
AlexTek's Avatar
 
Drives: BMW M3 E92 2011 ZCP
Join Date: Jan 2011
Location: Puerto Rico

Posts: 364
iTrader: (0)

Hey guys I have a brand new set of olugs and also a brand new tool for removing coils on M3. Send me a PM if you are interested.
AlexTek is offline  
Appreciate 0
Reply With Quote
      07-21-2014, 11:49 AM   #115
M3GarageKing
0
Private
 
Drives: E93#DTC Lexus IS350 Fsport DD
Join Date: Jul 2014
Location: LA

Posts: 54
iTrader: (1)

very nice write up, i think i going to give this a try!
M3GarageKing is offline   United_States
Appreciate 0
Reply With Quote
      07-27-2014, 07:40 PM   #116
dj_dub
4
NoFüknJoke
 
dj_dub's Avatar
 
Drives: 2010 BMW E90 M3 - SG/FR 6MT
Join Date: Jan 2013
Location: Bay Area, CA

Posts: 481
iTrader: (1)

Garage List
Thank you for this write up and all the contributors! I will perform this maintenance myself soon, in confidence, thanks to this DIY!
__________________
ESS Tune | aFe Stage 2 CF Intake | RPi X-Pipe & Scoops | Akrapovic w/CF Tips | MS Pulleys | WPC Bearings w/ARP Bolts | KW S/O | Dinan CF Strut Braces | Varrstoen ES1 | Hankook V12 | Verstraβe Spacers | Hardwired V1 | Perf Elec Steering Wheel V2 | F10 M5 Shift Knob | OEM CF Trim | BMWPedals.com | Arkym CF Front Lip & Rear Diffuser | Forcewerkz CF SS Extensions | OEM CF Spoiler & Mirror Covers | 3M Black Roof
dj_dub is offline   Philippines
Appreciate 0
Reply With Quote
      08-09-2014, 03:37 PM   #117
dreamspeed
10
Major
 
dreamspeed's Avatar
 
Drives: 6MT
Join Date: Jul 2012
Location: Los Angeles

Posts: 1,078
iTrader: (0)

Just finished changing my spark plugs and it was really easy. I just wanted to reiterate a couple of points for people looking to do this as I was way more worried about the difficulty than i needed to be.

1. You do not need any kind of special tools. All you need are a couple of flat head screwdrivers of varying lengths. Just poke around the coil packs and you will eventually find a spot to leverage/pry the thing loose. For the rear 2 coil packs you may need to stick something under the screwdriver for leverage (like a second screwdriver). All 8 coil packs popped off with minimal force

2. The front 3 plugs on each side can be removed and installed easily with an extension and spark plug socket. It will be easier if you have the socket with the rubber inside to hold the spark plug in place. Just assemble the socket, extension and spark plug and screw it into the head.

3. This is the MOST IMPORTANT part of the DIY and if you don't do this correctly you will waste a lot of time.

For the 2 plugs closest to the firewall on both sides you need to use a spark plug socket that DOES NOT have the rubber inside. You will not have enough space to put in your socket + extension + plug assembly. What you need to do is drop the spark plug in, then drop the socket in, then attach the extension to the socket.

If you use a socket with the rubber whats going to happen is after you screw in your spark plug you will not be able to get your socket back out. The connection between the rubber + spark plug is going to be stronger than the connection between your socket and extension. If you try to pull the socket out the extension will just keep popping off.

I would also NOT recommend using a locking extension because even though you would be able to pop the socket off the plug now the extension + socket assembly is too long to pull out of the tight spot and you will spend a lot of time trying to finangle the the locking extension off the socket in a really tight spot.

Use a socket with no rubber so that after you a screw the plug in you can pull out your assembly partially and use a screw driver to pop the socket off the extension and drop it back into the head. Then use one of those magnetic pickup tools to retrieve our socket.

Final note: IF you have one of those spark plug sockets with the built in flex extension you MAY be able to snake it into the 4th cylinder and avoid all the issues i indicated above :P

Sorry for the long post but i really wanted to clarify #3 as doing it incorrectly really wasted a lot of my time.
__________________
dreamspeed is offline   United_States
Appreciate 0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:47 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST