Proformance Industries: If you can visualize it, we can materialize it!

[Proformance Industries]

Chris, its me! How you been brother? Swing by the shop one of these days, we are just up the block!

[Proformance Industries]

This 95' Porsche 993 Carerra C2 is one of my favorite 911's of all time. The design is timeless.

The car was brought in for some TLC. The wheels were straightened and refinished. We also replaced the valve cover gaskets, alternator pulley, and the engine belt. We changed the oil and filter as well.

This car is equipped with the Fabspeed exhaust and cold air intake package. The sound is intoxicating. This car is actually for sale by the owner, if anyone is interested just shoot me a message!

[Proformance Industries]

We originally made these wheels for NY Rangers' Dan Girardi's Bently GT coupe a few months ago. Dan loved the original finish which was a brushed aluminum face with a gloss black lip. Some time has passed and Dan wanted a new look. So we sort of reversed his setup. The centers are now body color matched, and the lips are chrome. The new look is amazing and may actually work better on this car considering all the chrome accents throughout. We also swapped out the lower black grills for an OEM aluminum set. Here are some before and after shots. Official shoot coming soon, so stay tuned!

[Proformance Industries]

We built these Pro Forged PF-M8 wheels in 20" for this 997 CS. The customer wanted to retain some what of an original look for his car, so we stuck with an OEM Porsche color for the centers and gave the aluminum lips a high polished finish. We also made these wheels to accept the OEM Porsche center cap, as per customer's request. The end result speaks for itself, these wheels took the car to the next level!


Official shoot coming soon

[CarbonFiberKreations]

Nice Photo's! Nice project's!!

[Proformance Industries]

We just got our hands on a brand new X5M. We will be building a custom set of 21" wheels for this beast. While its here we will also be powder coating some misc parts like the grills and reflectors. Updated photos to follow...

[chris s]

Niiiiiiiice!

[Proformance Industries]

Mike Murphy stopped in with his E46 M3 yesterday for an exhaust swap. We installed a full Supersprint exhaust on his M3. This system consisted of the headers, midpipes and race muffler. The car picked up a few horses and sounds so much better. The OEM system was a lot heavier then the SS.

Excuse the grainy shots, accidently had the ISO @ 800, yikes.

[Proformance Industries]

This X5M came in to have its lips powder coated gloss black to accent the matte centers. They were originally a raw polished aluminum finished.

Full photo shoot coming soon!

[Proformance Industries]

WIKIPEDIA: A sleeper is a car that has high performance and an unassuming exterior. Sleeper cars are termed such because their exterior looks little or no different from a standard or economy-class car. While appearing to be a standard or neglected car, internally they are modified to perform at higher performance levels


This E46 from Last Minute Racing looks like any other non-M 3 series on the road. Take a closer look!

E46 M3 engine, 6speed transmission, brakes, suspension, rear end, interior etc etc etc. The only thing left bone stock was the exterior, and that is why this car is the ULTIMATE sleeper!

[disruptv]

Franky

hit me up brotha! I think I want to come in Friday 4 a NYS inspection, wheel straightening and installation of mid-section exhaust...

[Proformance Industries]

Hey I just spoke to Mario, he said he has you all set up for Friday? Did he tell you we dont do inspections here? Robs Auto down the block can get you squared away as far as thats concerned.

See you Friday bro!

[Proformance Industries]

This Porsche Panamara came in a few weeks ago with a set of severely bent Hamann wheels in the wrong size, wrong offset, and worst of all running a very stretched and low profile tire not meant for the whee,l or car for that matter. After going through some options with the owner, he decided he needed a break from all these wheel problems and wanted to go back to the stock wheels. We powder coated them matte black and smoked out the tail lights to give the car a semi-murdered look. We will be building a custom set of ProForged wheels for this car in a few weeks, so stay tuned

[Proformance Industries]

We started with a set of 22" 360 forged wheels in gunmetal grey with exterior color matched gloss black lips. To match the gunmetal centers, we installed carbon fiber front and side vent grills, which also obviously accented the OEM carbon fiber roof.

As far as performance is concerned, we installed a set of Dinan dual cold air intakes and a Meisterchaft exhaust system.

[Proformance Industries]

Thought I'd share some shots of a current project car. We finished the matte black paint and custom built ProForged wheels this week. We also just popped in some H&R springs. We are waiting on the carbon fiber mirrors, front and side grills as well as some other exterior mods. This car will be recieving some Akrapovic and ESS lovin' within the next few weeks, so check back soon!

[Proformance Industries]

We just finished installing a Borla cat back exhaust system on a new Corvette Z06. The new exhaust added a few ponies and a deep throaty tone...an overall improvement.

[Proformance Industries]

Forum member MaverickNemesis stopped in on Friday to have his new Akrapovic exhaust installed on his E92 M3. The quality and craftsmanship Akra has to offer is very impressive. Its really light too being its made of titanium. Here are a few shots of the ride with the new muffler. It bolted right onto the stock midpipes without any problems. Fitment was spot on and the adjustable tips are perfect for those who will be going with a rear diffuser.

[Proformance Industries]

This Challenger came in for a simple powder coat job. The wheels were originally a silver finish, we coated them matte black.

[Proformance Industries]

Here are a few shots from around the shop... We have a few projects going on.

Mariano Rivera's Challenger is back in the shop to have our PF/S5 wheels re-polished. Unfortunately, Mariano took his ride into a car wash and they used an acidic wheel cleaner, dulling the finish on the lips. We will be cleaning these wheels and bringing them back to life..


This BMW M6 stopped in this week. We powder coated the original M6 wheels, giving them a new matte black finish.


We also have a Ferrari 360 here today that we just wrapped up. All four wheels received a full repair job, ridding them of the bends and curb rash they came in with...


We are also working on a new Porsche 997.2 Carrera. This car will be receiving a 3M clear bra wrap for the front end as well as the OEM model designation strip across the sides of the car. We will also be installing a Valentine One radar detector in the rear view mirror. Updated photos to follow....

Our matte black E90 M3 build is coming along nicely.... As you can see in the photo we are waiting for some last minute misc. parts like the front & side grills, bumper reflectors, etc... More parts should be in this week, so stay tuned for photos...

[Nate@IND]

Nice update guys

[Proformance Industries]

Thanks Nate!

We are working on the Carerra today.... just finished installing the model designation strip across both sides of the car. We also took apart the rearview mirror.. getting it ready for the Valentine One.