ESSTuning's 3rd VT3 by M33

[m33]

Originally Posted by tightie

Sorry to hear man. I hope you get that fixed asap.

Thanks man!

[m33]

Originally Posted by leigh

What's the fuel system you are using? Is it good for e85?

Its good for E85 and so will the final version

[m33]

Thanks for The support fella's

[///M Power-Belgium]

Originally Posted by img

BOOM

Congrats man with the VT3
Now about the video...the start up of the motor,i can hear at 0.06 run time in the video the famous clack...bang sound,my engine is stock,and i have it too,when i don't drive the car for 3-4 days, and it's realy scary sometimes,and when i drive here every day...no clack...bang sound
BTW...there is a tread about this problem,but no solution !
So...my question is...is there someone with a solution for this problem ?
Thanks in advance.........

[VCP]

Sound may be coming from vanos units or a hydraulic timing component that oil has drain out from days of not having oil pressure. S65 runs of oil pump for timing hydraulics older M motors had dedicated pumps and gas charged cylinders to help hold oil in timing hydraulics.

Originally Posted by ///M Power-Belgium

Congrats man with the VT3
Now about the video...the start up of the motor,i can hear at 0.06 run time in the video the famous clack...bang sound,my engine is stock,and i have it too,when i don't drive the car for 3-4 days, and it's realy scary sometimes,and when i drive here every day...no clack...bang sound
BTW...there is a tread about this problem,but no solution !
So...my question is...is there someone with a solution for this problem ?
Thanks in advance.........

[m33]

Originally Posted by ///M Power-Belgium

Congrats man with the VT3
Now about the video...the start up of the motor,i can hear at 0.06 run time in the video the famous clack...bang sound,my engine is stock,and i have it too,when i don't drive the car for 3-4 days, and it's realy scary sometimes,and when i drive here every day...no clack...bang sound
BTW...there is a tread about this problem,but no solution !
So...my question is...is there someone with a solution for this problem ?
Thanks in advance.........

That was a video taken of the first initial start up of the built motor , a lot is going on considering its the first initial start up as the oil needs to be pumped so on so forth...

[m33]

Originally Posted by VCP

Sound may be coming from vanos units or a hydraulic timing component that oil has drain out from days of not having oil pressure. S65 runs of oil pump for timing hydraulics older M motors had dedicated pumps and gas charged cylinders to help hold oil in timing hydraulics.

+1

[///M Power-Belgium]

VCP , m33 and Mike...THX guys, so we can do nothing about this problem

[regular guy]

There are a few oil check valves in the S65 engine...like this one that prevents oil from draining from the heads down to the block when the engine is off.

http://www.realoem.com/bmw/showparts...10&hg=11&fg=10

See item #9.

[m33]

I also picked the AWRON gauge from Eas and let me tell you
This gauge is "Sick" and a must have if your supercharged !
Makes monitoring and trouble shooting a breeze.
Installation was a slight challenge but Tom @ Eas made it a breeze as he was on standby to answer questions that I had.

I also opted for the intake runner for boost which is a pretty sleek piece.

Here's a video of the display installed.
[u2b]

[/u2b]

[Mrbig]

That gauge looks cool !!! Are u up and running now in vt3 trim ???