Michelin PS2 255/35 and 275/35 on ZCP with spacers

DopeM3 · 04-18-2013, 09:55 AM

I'm running Michelin PS2s 255/35 and 275/35 on ZCP wheels with 15mm spacers front and back. No rubbing at all even turning the wheels all the way in.

The reason why I post this is because I've seen a bunch of post saying they rub on 255/35 and 275/35 which they shouldn't be.

Just wanted to put this info out there if you guys need it. I could get pics if needed.

chris s · 04-18-2013, 10:00 AM

post pics. my friend runs the same tire sizes with 12/10, no rubbing.

DopeM3 · 04-18-2013, 10:03 AM

Quote:

Originally Posted by chris s

post pics. my friend runs the same tire sizes with 12/10, no rubbing.

I'll get some pics. Suspension is stock now but will be installing my H&R springs when I get the chance, however, I don't see a problem rubbing after springs are installed.

ssabripo · 04-18-2013, 10:20 AM

I'm running the same with 15/10mm spacers and no rubbing.

the reason for this is the tire... PSS/PS2's tend to less wide than say an equivalent AD08 or Potenza's, etc.

The same setup with the AD08's would rub like no tomorrow; they are wider/fatter than the PSS.

DopeM3 · 04-18-2013, 10:27 AM

Quote:

Originally Posted by ssabripo

I'm running the same with 15/10mm spacers and no rubbing.

the reason for this is the tire... PSS/PS2's tend to less wide than say an equivalent AD08 or Potenza's, etc.

The same setup with the AD08's would rub like no tomorrow; they are wider/fatter than the PSS.

Michelins

I'm running PS2s

Transfer · 04-18-2013, 08:55 PM

Well good for you. I tried 15mm front and I rub front and back of the tire while turning. Rears I did 12mm and rubbed on big dips. So apparently not all ZCP are created equal.

04-18-2013, 09:55 AM	#1
DopeM3 M Power 81 Rep 1,293 Posts Drives: M3 Join Date: Jun 2012 Location: NH iTrader: (8)	Michelin PS2 255/35 and 275/35 on ZCP with spacers I'm running Michelin PS2s 255/35 and 275/35 on ZCP wheels with 15mm spacers front and back. No rubbing at all even turning the wheels all the way in. The reason why I post this is because I've seen a bunch of post saying they rub on 255/35 and 275/35 which they shouldn't be. Just wanted to put this info out there if you guys need it. I could get pics if needed. Last edited by DopeM3; 04-18-2013 at 10:26 AM..
	Appreciate 0 Tweet Quote

04-18-2013, 10:00 AM	#2
chris s Major General 1250 Rep 6,912 Posts Drives: 2022 Dravit G80 M3 Join Date: Oct 2008 Location: New York iTrader: (12)	post pics. my friend runs the same tire sizes with 12/10, no rubbing. __________________ 2022 Dravit/Fiona M3cx - Dinan midpipe w/VC, NW Carbonhaus CF, AST Springs, FC Spacers...more to come! 2016 Indi F80 M3 - SMB\|Amaro \| Mode Carbon \| ESS \| Akra EVO \| KW HAS...SOLD 2012 MR e92 M3 DCT, ESS SC, Brembo BBK, BBS FI... GONE but not forgotten! 2008 AW e92 M3 6MT, ESS SC, BBS LM's...SOLD!
	Appreciate 0 Quote

04-18-2013, 10:20 AM	#4
ssabripo HALA MADRID! 939 Rep 2,879 Posts Drives: camels & donkeys Join Date: Jul 2005 Location: Plantation, Fl iTrader: (7)	I'm running the same with 15/10mm spacers and no rubbing. the reason for this is the tire... PSS/PS2's tend to less wide than say an equivalent AD08 or Potenza's, etc. The same setup with the AD08's would rub like no tomorrow; they are wider/fatter than the PSS. __________________ F87 M2 Competition, Sunset Orange, Exc, DCT. SOLD F80 M3 Mineral Grey/Sakir Orange, Exc, DCT... ED 6/2015 SOLDE90 M3, Interlagos Blue / M individual two-tone, ZCP, ZP2, ZCV, DCT, ED.
	Appreciate 0 Quote

04-18-2013, 08:55 PM	#6
Transfer Major General 5254 Rep 5,874 Posts Drives: Bronco Wildtrak, Tesla MYP Join Date: Mar 2010 Location: Issaquah, WA iTrader: (1)	Well good for you. I tried 15mm front and I rub front and back of the tire while turning. Rears I did 12mm and rubbed on big dips. So apparently not all ZCP are created equal.
	Appreciate 0 Quote