Cayuga Drag Strip Tonight!!

Ado · 06-23-2009, 12:53 PM

Quote:

Originally Posted by kmac1980

I could easily see those times, JB3 is a powerful tune.... I think there is a guy that gets "test tunes" for JB out there that runs 11.9s in his 135i with a similar setup to you.

It's very hard to get a 12.3 at Cayuga. You can have as much power as you want but launching that power especially with the torque in the N54 engine and the fact that it doesn't have LSD is a bitch. Having some really good rubber and getting them wormed up before the run will increase your chances of not spinning too much in first. It's easy to say easily but in all reality it's very hard

Maybe I've been out of the 335 and 135 scene too long but where is this guy that ran a 11.9 with the same setup with his 135? The 135 doesn't weight much less then the 335.

Links to BMW:

135i - Weight 1560 kg
http://www.bmw.com/com/en/newvehicle...datasheet.html

335 - Weight 1600 kg
http://www.bmw.com/com/en/newvehicle...gine_data.html

All this talk about the Turbo's makes me miss my torque. Can't wait for the blower in the M.

Ado · 06-23-2009, 12:55 PM

Quote:

Originally Posted by 2000gsr

Wednesday is a little tough for me too. Lets go this friday, Ado just come on friday!! I wanna see that AA short shifter.

I would go but I've got some family coming in from out of town. Come down with us tomorrow man. It's going to be a pretty good night, Wed are usually pretty empty so we'll be able to get in a tone of runs.

Ado · 06-23-2009, 12:56 PM

Quote:

Originally Posted by slammedm3

Welcome!!

Of all people I would love to see you on Wed. I've been wanting to hear and see your ride for a while

kmac1980 · 06-23-2009, 02:15 PM

Yes the launches are crap, but I'm sure some of these guys are running slicks for the track. As well, I've seen trap times as high as 120mph, so even with a crap launch they are pulling very hard once they hook up...

http://www.n54tech.com/forums/showthread.php?p=65923

Quote:

Originally Posted by Ado

It's very hard to get a 12.3 at Cayuga. You can have as much power as you want but launching that power especially with the torque in the N54 engine and the fact that it doesn't have LSD is a bitch. Having some really good rubber and getting them wormed up before the run will increase your chances of not spinning too much in first. It's easy to say easily but in all reality it's very hard

Maybe I've been out of the 335 and 135 scene too long but where is this guy that ran a 11.9 with the same setup with his 135? The 135 doesn't weight much less then the 335.

Links to BMW:

135i - Weight 1560 kg
http://www.bmw.com/com/en/newvehicle...datasheet.html

335 - Weight 1600 kg
http://www.bmw.com/com/en/newvehicle...gine_data.html

All this talk about the Turbo's makes me miss my torque. Can't wait for the blower in the M.

SlammedR8 · 06-23-2009, 02:23 PM

Quote:

Originally Posted by Ado

Of all people I would love to see you on Wed. I've been wanting to hear and see your ride for a while

haha thanks man! I dont think I'll be able to make it out on Wednesday...where in Toronto are you? I dont mind meeting somewhere closer to home, or perhaps we should do one of our next meets soon?

Ado · 06-24-2009, 03:09 PM

Alright we ended up having a nice group:

Here are the cars we have:

e92 M3, e31 M5, C63 MB, Nissan GTR

If any of you end up wanting to go call my cell 647 271 3484, we are all meeting up at 5 in Mississauga to go down...

Alessandro · 06-24-2009, 09:27 PM

have fun guys, post the times please

be safe

broken_arrow · 06-25-2009, 12:24 AM

Here are the times as promised!

They were a lot better then we thought! The DA (air density) was high today, and made our runs look a bit off.... I used dragtimes.com calculator to correct out times.

E92 M3 - Best 13.025@109 - Corrected - 12.654@112.271 MPH

E36 M5 - Best 13.510@104.6 - Corrected - 13.125@107.739 MPH

CLS63 - Best 12.775@111.57 - Corrected - 12.411@114.918 MPH

R35 GTR - Best 11.69@124.2 - Corrected - 11.566@125.533 MPH

The R35 never used LC...

Ado · 06-25-2009, 02:01 PM

Thanks for posting up the times I wish I did 12.6 hehe that would have made my day.

I could have done a little better, the improvements I need to make is changing from 1st to 2nd and to get as little spin as possible in 2nd. Ever since I got my AA short shifter I haven't been able to get use to it.

Had lots of fun, enjoyed watching the GTR rip me a new one with his best run 11.6 when he ran with me. I'll grab the slips from my car soon and post them up.

broken_arrow · 06-25-2009, 03:04 PM

Quote:

Originally Posted by Ado

Thanks for posting up the times I wish I did 12.6 hehe that would have made my day.

I could have done a little better, the improvements I need to make is changing from 1st to 2nd and to get as little spin as possible in 2nd. Ever since I got my AA short shifter I haven't been able to get use to it.

Had lots of fun, enjoyed watching the GTR rip me a new one with his best run 11.6 when he ran with me. I'll grab the slips from my car soon and post them up.

Its kinda depressing to see the GTR just pulling away so effortlessly, lol... It was a lot of fun nevertheless!

EDIT: It was especially fun to beat those SRT8s, hahaha.

Alessandro · 06-25-2009, 03:17 PM

Quote:

Originally Posted by broken_arrow

Its kinda depressing to see the GTR just pulling away so effortlessly, lol... It was a lot of fun nevertheless!

EDIT: It was especially fun to beat those SRT8s, hahaha.

GTR,s are crazy fast.

btw i beat SRT8s all day long on the track and i like there faces when they driving by afterwards priceless.

FBTO · 06-29-2009, 01:14 AM

Are they open this Wednesday? Canada day? If not, let's do it next Wednesday?

FBTO · 07-06-2009, 09:24 PM

This Wednesday? Anyone?

Ado · 07-07-2009, 03:11 PM

Actually I may be interested for this Wed. A friend of mine with a 335 wants to go so I'll go as well. Anyone else for this Wed?

Gearhead999s · 07-07-2009, 03:17 PM

Cannot this Wednesday as I have an early evening meeting.

FBTO · 07-07-2009, 09:29 PM

Quote:

Originally Posted by Gearhead999s

Cannot this Wednesday as I have an early evening meeting.

If you can't make, then we will have to leave it for another day. Let me know what works for you. Next Wednesday I can't. But I can on next Friday.

FBTO · 07-09-2009, 10:32 AM

Ok, July 24th. Can everyone make it??

Ado · 07-09-2009, 12:04 PM

Sucks you couldn't make it down. Would have loved to run against you. Then again since we can't get the right times you could always go down on your own and tell us the time you did

I went down with Dzeno from the board, he's got an all done up 335. He did 12.61 at 109.80mph and I did a 12.92 at 107 mph.

kmac1980 · 07-09-2009, 01:15 PM

Quote:

Originally Posted by Ado

Sucks you couldn't make it down. Would have loved to run against you. Then again since we can't get the right times you could always go down on your own and tell us the time you did

I went down with Dzeno from the board, he's got an all done up 335. He did 12.61 at 109.80mph and I did a 12.92 at 107 mph.

12.92 with a tune??? what was your 60 ft time like, although your trap is low too, you should be trapping 110 i'd think...

Ado · 07-09-2009, 01:17 PM

You been out to the track yet kmac1980?

2000gsr · 07-10-2009, 07:39 AM

Aight who is down for tonight???

FBTO · 07-10-2009, 09:24 AM

Quote:

Originally Posted by 2000gsr

Aight who is down for tonight???

Can't. going there on my bike tomorrow.

06-24-2009, 03:09 PM	#94
Ado King Kong 59 Rep 771 Posts Drives: E92 M3 Join Date: Nov 2006 Location: Toronto iTrader: (0)	Alright we ended up having a nice group: Here are the cars we have: e92 M3, e31 M5, C63 MB, Nissan GTR If any of you end up wanting to go call my cell 647 271 3484, we are all meeting up at 5 in Mississauga to go down... __________________ 08 E92 M3 - AA ECU, AA Pulleys, AA Air Filter, AA Short Shifter - CURRENT E92 335i - Vishnu V3, Exhaust, Intake, BOV, CDV Delete - SOLD 1991 850i Dinan Twin Turbo - SOLD
	Appreciate 0 Quote

06-24-2009, 09:27 PM	#95
Alessandro Major 109 Rep 1,043 Posts Drives: Audi RS5 Join Date: Mar 2008 Location: Canada iTrader: (8) Garage List 2011 335is [9.50]	have fun guys, post the times please be safe
	Appreciate 0 Quote

06-25-2009, 12:24 AM	#96
broken_arrow Private 11 Rep 98 Posts Drives: 2015 BMW 535d xDrive Join Date: Jun 2009 Location: Toronto iTrader: (0)	Here are the times as promised! They were a lot better then we thought! The DA (air density) was high today, and made our runs look a bit off.... I used dragtimes.com calculator to correct out times. E92 M3 - Best 13.025@109 - Corrected - 12.654@112.271 MPH E36 M5 - Best 13.510@104.6 - Corrected - 13.125@107.739 MPH CLS63 - Best 12.775@111.57 - Corrected - 12.411@114.918 MPH R35 GTR - Best 11.69@124.2 - Corrected - 11.566@125.533 MPH The R35 never used LC...
	Appreciate 0 Quote

06-25-2009, 02:01 PM	#97
Ado King Kong 59 Rep 771 Posts Drives: E92 M3 Join Date: Nov 2006 Location: Toronto iTrader: (0)	Thanks for posting up the times I wish I did 12.6 hehe that would have made my day. I could have done a little better, the improvements I need to make is changing from 1st to 2nd and to get as little spin as possible in 2nd. Ever since I got my AA short shifter I haven't been able to get use to it. Had lots of fun, enjoyed watching the GTR rip me a new one with his best run 11.6 when he ran with me. I'll grab the slips from my car soon and post them up. __________________ 08 E92 M3 - AA ECU, AA Pulleys, AA Air Filter, AA Short Shifter - CURRENT E92 335i - Vishnu V3, Exhaust, Intake, BOV, CDV Delete - SOLD 1991 850i Dinan Twin Turbo - SOLD
	Appreciate 0 Quote

06-29-2009, 01:14 AM	#100
FBTO M3 Destroyer!! 16 Rep 437 Posts Drives: 10 MB C63, 02 CBR954, 05 CR125 Join Date: Apr 2009 Location: Toronto, Canada iTrader: (0)	Are they open this Wednesday? Canada day? If not, let's do it next Wednesday?
	Appreciate 0 Quote

07-06-2009, 09:24 PM	#101
FBTO M3 Destroyer!! 16 Rep 437 Posts Drives: 10 MB C63, 02 CBR954, 05 CR125 Join Date: Apr 2009 Location: Toronto, Canada iTrader: (0)	This Wednesday? Anyone?
	Appreciate 0 Quote

07-07-2009, 03:11 PM	#102
Ado King Kong 59 Rep 771 Posts Drives: E92 M3 Join Date: Nov 2006 Location: Toronto iTrader: (0)	Actually I may be interested for this Wed. A friend of mine with a 335 wants to go so I'll go as well. Anyone else for this Wed? __________________ 08 E92 M3 - AA ECU, AA Pulleys, AA Air Filter, AA Short Shifter - CURRENT E92 335i - Vishnu V3, Exhaust, Intake, BOV, CDV Delete - SOLD 1991 850i Dinan Twin Turbo - SOLD
	Appreciate 0 Quote

07-07-2009, 03:17 PM	#103
Gearhead999s Major General 817 Rep 7,887 Posts Drives: RR Velar R=Dynamic M2C R1200GS Join Date: Apr 2007 Location: Toronto iTrader: (0)	Cannot this Wednesday as I have an early evening meeting.
	Appreciate 0 Quote

07-09-2009, 10:32 AM	#105
FBTO M3 Destroyer!! 16 Rep 437 Posts Drives: 10 MB C63, 02 CBR954, 05 CR125 Join Date: Apr 2009 Location: Toronto, Canada iTrader: (0)	Ok, July 24th. Can everyone make it??
	Appreciate 0 Quote

07-09-2009, 12:04 PM	#106
Ado King Kong 59 Rep 771 Posts Drives: E92 M3 Join Date: Nov 2006 Location: Toronto iTrader: (0)	Sucks you couldn't make it down. Would have loved to run against you. Then again since we can't get the right times you could always go down on your own and tell us the time you did I went down with Dzeno from the board, he's got an all done up 335. He did 12.61 at 109.80mph and I did a 12.92 at 107 mph. __________________ 08 E92 M3 - AA ECU, AA Pulleys, AA Air Filter, AA Short Shifter - CURRENT E92 335i - Vishnu V3, Exhaust, Intake, BOV, CDV Delete - SOLD 1991 850i Dinan Twin Turbo - SOLD
	Appreciate 0 Quote

07-09-2009, 01:17 PM	#108
Ado King Kong 59 Rep 771 Posts Drives: E92 M3 Join Date: Nov 2006 Location: Toronto iTrader: (0)	You been out to the track yet kmac1980? __________________ 08 E92 M3 - AA ECU, AA Pulleys, AA Air Filter, AA Short Shifter - CURRENT E92 335i - Vishnu V3, Exhaust, Intake, BOV, CDV Delete - SOLD 1991 850i Dinan Twin Turbo - SOLD
	Appreciate 0 Quote

07-10-2009, 07:39 AM	#109
2000gsr First Lieutenant 18 Rep 396 Posts Drives: 2018 M4 Join Date: Aug 2008 Location: Toronto, ON iTrader: (0)	Aight who is down for tonight???
	Appreciate 0 Quote