Genuine Eisenmann E90/92 M3 Sport/Race Performance levels

[DJ9]

Originally Posted by GregW / Oregon

Perhaps the term "whimpy" is not appropriate. I did not actually unwrap and look at the clamps, nor did I get them back when I picked up the car--they seemed quite heavy. I think what the installer meant is they thought the installation would be more secure with the pipes welded.

To explain, the stock rear tailpipe section on each side is reused with the new muffler. Since they are welded to the original muffler, they must be cut off, and then attached to the Eisenmann with clamps or by welding. I have some pics of this at home the IND supplied I will post.

Greg, thanks buddy...great explanation.

[moog55]

WOW! thanks a lot for taking the time to do this. it was the extremely well-done video. i'm sold.

Originally Posted by savage.ulm1

I made my best...I was not able to register exactly the deep sound of the Sport version.My microphone is not enought good.. Anyway here you will have an idea of the differences. Only an idea, since the reality is really much more satisfying...

For example the accelleration with the microphone near the exaust created a lot of distorsion when I registered it with the Eisenmann installed..and I didn't put it into the clip.

Also the distorsion starting at minute 3:21 is not real....

Anyway, very deep sound. enought for me.

[Krueger///M3]

Originally Posted by GregW / Oregon

Exhaust is on. Had it installed by Pacific Motorsports in Portland. They thought the supplied clamps were a little whimpy, so they welded on the removed stock tailpipes.

I've only driven 1/2 hour so far, but I must say the sound is absolutely PERFECT to my ears, just as Nate at IND described. Much throatier, but not obnoxiously loud. The scale and appearance of the tips is very good, as well.

I'll post pics and weight comparisons tomorrow. I don't have video capability currently, but will see what I can do.

Nice, Pacific Motorsports is a great shop. Do you know if they have representation on this board? I also heard that one of the main guys there just started his own business...

[CatchM3]

I had mine installed today and I'm very happy with the exhaust

Perfect looks and excellent sound!

[Nate@IND]

Originally Posted by GregW / Oregon

Exhaust is on. Had it installed by Pacific Motorsports in Portland. They thought the supplied clamps were a little whimpy, so they welded on the removed stock tailpipes.

I've only driven 1/2 hour so far, but I must say the sound is absolutely PERFECT to my ears, just as Nate at IND described. Much throatier, but not obnoxiously loud. The scale and appearance of the tips is very good, as well.

I'll post pics and weight comparisons tomorrow. I don't have video capability currently, but will see what I can do.

Congrats on the new Eisenmann Sport system Greg I can't wait to see installed photos.

Originally Posted by CatchM3

I had mind installed today and I'm very happy with the exhaust

Perfect looks and excellent sound!

Seeing post like this makes my job worth it Selling quality products that you can stand behind is what it’s all about. Enjoy the new Eisenmann system and post some photos when you get a chance.

[CatchM3]

Some pictures and a video of latest install. Enjoy

Sorry if the images are too big.

PICTURES











VIDEO

http://www.x-reality.com/m3e90/exhaust.mov

[GregW / Oregon]

I must admit I was getting a little jaded after 4 months and 3,500 miles with my M3. The newness was wearing off. I must say, this Eisenmann exhaust has changed that--it's what should have come from the factory! The sound level and tone is PERFECT, IMO. It's deeper and throatier, but not at all obnoxious or droning. Unfortunately it may impact my fuel mileage, since I now like to hear the car rev more; but, even at lower revs it sounds great!

List price is $2,839. Nate at IND (distributor for Midwest & West) can direct you to retailers. Construction & fit seem first rate. Tip size: 76mm stock, 83 mm Eisenmann (20 % larger in area). Weight: 43.7# stock; 46.3# Eisenmann.

Pacific Motorsports in Portland did the installation. They welded the pipes to the unit reather than using the supplied clamps because they thought the clamps resulted in a little leakage.

I'm in love with my new again car!

(White balance on these first couple shots is screwed up):

[DJ9]

Nice Greg! I was waiting for your feedback on this, lol Glad to hear you approve.

One thing though, did you notice the difference in install from yours and CatchM3's above?

There is about 3 to 4 inch difference in the length of the pipe tips.

I wonder if this is due to the welding that you had done; or if this is a Race vs. Sport difference?(I ordered Sport too)

[Nate@IND]

Nice photos guys

Originally Posted by DJ9

Nice Greg! I was waiting for your feedback on this, lol Glad to hear you approve.

One thing though, did you notice the difference in install from yours and CatchM3's above?

There is about 3 to 4 inch difference in the length of the pipe tips.

I wonder if this is due to the welding that you had done; or if this is a Race vs. Sport difference?(I ordered Sport too)

The tips will stick out around 1.5cm on the E90 sedan. Also we the car is at full running temp on all models E90/92/93 the tips will expand about 1 inch. Eisenmann designed the tips with a 20 degree angle cut to accommodate all models.

[GregW / Oregon]

Originally Posted by DJ9

Nice Greg! I was waiting for your feedback on this, lol Glad to hear you approve.

One thing though, did you notice the difference in install from yours and CatchM3's above?

There is about 3 to 4 inch difference in the length of the pipe tips.

I wonder if this is due to the welding that you had done; or if this is a Race vs. Sport difference?(I ordered Sport too)

I noticed that, although I think the difference is no more than 2". Personally, I like the "tucked in" fit, which is more like stock.

[CatchM3]

I honestly love how the tips stick out on the E90. Very aggressive look. The video I posted does no justice on how incrediable my car sounds in person. Im looking into the supersprint x-pipe for my next mod. I don't know what else to say that has already been said about this exhaust system. Absolutely no regrets.

[hakaida442]

If the tips stick out that far out can you get burned unloading stuff from the trunk?

[CatchM3]

maybe but personally I don't see myself getting burnt and I have been unloading stuff out of my trunk all day today.

Active Autowerkes E90 exhaust system tips also stick out:


But IMHO, there is absolutely no comparison when it comes to sound quality between the two mufflers and I've heard the AA E90 personally. I'm not knocking down AA in anyway, it's just a matter of preference. Eisenmann is definitely much throatier sound and just sounds MEAN! It really brought my car alive.

On a side note. I called AA and left messages inquiring about pricing and availability on their system but i never got a reply nor a call back. I was somewhat disappointed about that, especially from someone who have spent more than 9K in the past. They dropped the ball. Anyway, I don't mean to steer off topic.

I am very pleased with the outcome

[DJ9]

Originally Posted by GregW / Oregon

I noticed that, although I think the difference is no more than 2". Personally, I like the "tucked in" fit, which is more like stock.

Either looks great!

If it was somewhere right in the middle(ie. right behind the logo) that would be perfect.

Cant wait for mine to get here, thanks IND!

[CatchM3]

Originally Posted by DJ9

Either looks great!

If it was somewhere right in the middle(ie. right behind the logo) that would be perfect.

I agree. Enjoy your new exhaust DJ9.

[mdrobc13]

I like Greg W's tucked and neat OEM type look. I hope that mine fit the same when they arrive. Catch M3's look okay to but not my preference! I had a similar experience with my other car and it just bothered me that the tips stuck out far too much. Anybody else have this experience with their 08 M3 exhaust fitment?

[IWC Doppel]

I also like the tucked in look, any views on mounting would be appreciated.

Protruding tips look a little wrong IMO

[CatchM3]

LOL What a mix of reactions. i guess its a personal choice. i like it and that's all that matters.

[Nate@IND]

Here is a photo of the tip length on ShadeM3's E92 M3 before we installed his rear diffuser. It seems there is a little difference in the length depending on the installer.


Greg's

[DJ9]

That's what I'm talking about Shade's is exactly how i'm going to request mine to be set up(right behind the logo).

All personal pref, but either look really does look clean....one is just a bit more aggressive.

Thanks for the feedback Nate & IND!

[Nate@IND]

Originally Posted by DJ9

That's what I'm talking about Shade's is exactly how i'm going to request mine to be set up(right behind the logo).

All personal pref, but either look really does look clean....one is just a bit more aggressive.

Thanks for the feedback Nate & IND!

True. It's all about personal preference

Guys make sure you let the installer know where you want the tips to be positioned. When we install the system at IND our installer always has us come out and take a look before completing the install.

Just for comparison. Here is a photo of our E92 M3 before we installed the Vorsteiner rear diffuser.

[DJ9]

Originally Posted by Nate@IND

Just for comparison. Here is a photo of our E92 M3 before we installed the Vorsteiner rear diffuser.

That is perfect