BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Engine, Transmission, Exhaust, Drivetrain, ECU Software Modifications
 
Post Reply
 
Thread Tools Search this Thread
      11-14-2012, 12:11 PM   #683
BPMSport
BimmerPost Supporting Vendor
BPMSport's Avatar
United_States
3381
Rep
7,539
Posts


Drives: Harrop M3 / F10 M5 / F82 M4
Join Date: Apr 2008
Location: SoCal

iTrader: (9)

Garage List
2000 BMW M5  [0.00]
1990 BMW 735i Turbo  [0.00]
2008 BMW M3  [7.50]
2015 BMW M3  [0.00]
2015 BMW M5  [0.00]
Dealers say that 'modules crap out' during updates...

Is it true... Well, partially.

This is something that was much more rampant back in the day when Progman and SSS was used. Ever since ISTA/P was released, module failure is a rare occurrence.

The real truth of the matter is that they usually don't want to update it because in some cases it takes hours, and that causes them to lose a workable bay for another car that can be pushed in and out.

I have updated hundreds of cars without a single module failure. Most people wind up getting the BPMFlash cable which kills two birds with one stone - the 240E update, as well as a performance tune suited for the vehicles modifications. You can't go wrong there.

If flashed properly, there is absolutely no reason for any module failure, especially when updating only DCT/DME and not the entire car.

I probably updated 10 DCT's and DME's last week to the latest versions, as a newer DCT version was recently released. Zero issues using the factory ICOM and the factory software from Germany for updating modules.
__________________

-----| Like us on Facebook | Instagram || Tuning Information | Remote Coding |-----
----Visit us at www.BPMSport.com - Emotion. Driven. | Toll Free: (888) 557-5133----
Appreciate 0
      11-14-2012, 12:22 PM   #684
Wendall
***Major MammelToe
Wendall's Avatar
United_States
157
Rep
1,139
Posts

Drives: E92 M3 SG coupe
Join Date: Feb 2012
Location: Orange County, CA

iTrader: (3)

Quote:
Originally Posted by Mike Benvo View Post
Dealers say that 'modules crap out' during updates...

Is it true... Well, partially.

This is something that was much more rampant back in the day when Progman and SSS was used. Ever since ISTA/P was released, module failure is a rare occurrence.

The real truth of the matter is that they usually don't want to update it because in some cases it takes hours, and that causes them to lose a workable bay for another car that can be pushed in and out.

I have updated hundreds of cars without a single module failure. Most people wind up getting the BPMFlash cable which kills two birds with one stone - the 240E update, as well as a performance tune suited for the vehicles modifications. You can't go wrong there.

If flashed properly, there is absolutely no reason for any module failure, especially when updating only DCT/DME and not the entire car.

I probably updated 10 DCT's and DME's last week to the latest versions, as a newer DCT version was recently released. Zero issues using the factory ICOM and the factory software from Germany for updating modules.
Can you pm me pricing on the 240E update? Thanks!
__________________
E92 M3 SG DCT - AA Filter, Verstraβe Paddles, ECS SS, MH race stud, Stoptech BBK, MR Exhaust,RE Pulley, BPM Tune,Euro bumper and GTS lip, Euro MDM & DCT, KW CS, Recaro PP, TMS Soild Diff Mounts, MRF solid subframe mounts, GTS aero, RPM track built motor.

Appreciate 0
      11-14-2012, 02:30 PM   #685
MilehighM3
Brigadier General
MilehighM3's Avatar
United_States
910
Rep
3,452
Posts

Drives: Harrop E90 M3
Join Date: May 2011
Location: Colorado Springs

iTrader: (14)

Garage List
2009 E90 M3  [6.50]
Quote:
Originally Posted by ERinEC
I was just informed by the dealer that my 2011 E92 has E89X-10-09-511 and that unless the car is throwing a code, no need to upgrade.

Could I benefit from an upgrade? This appears to be a rather dated version.
Yours would be worth updating. You are on ISTA/P version 2.39. The main factory improvements start at 2.46 from what I have gathered. I'm sure Mike can correct me if I'm incorrect.
Appreciate 0
      11-15-2012, 09:08 AM   #686
Dynamico
Private
United_States
53
Rep
67
Posts

Drives: '22 M4 Kith Frozen Black
Join Date: Oct 2012
Location: Miami Florida

iTrader: (0)

So I went yesterday, since the SA told me the car was rdy, and when I get there I asked him about the software version to see if they had upgraded it or not. He called a tech I think and asked him what the latest software version was.... He didn't even check or asked what the version on the car is, but he is telling me that since the car was in there and they replaced the sensors for the break that the car gets updated automatically. Anyway ended up saying that the version was 427.xx, so ummm what is he giving me???

I had to leave the car there because the low air light stays on from the tire, and says Inactive, so they gotta check the sensor for that or something.

Any ideas into what I should talk to him about today??? Or does it seem like he's trying to avoid the software update, or maybe it was done and he just doesn't know how to explain it??? I still haven't gotten no work order, he had given me the papers yesterday but I gave them to the valet parking guy so he can bring the car, and then we just took it back because of the Inactive light thing. So couldn't really read the work order, but I will today when I pick it up.
__________________
Appreciate 0
      11-15-2012, 09:51 AM   #687
pbar
Captain
pbar's Avatar
1381
Rep
756
Posts

Drives: 992 GTS, Tesla M3P
Join Date: Oct 2012
Location: San Francisco

iTrader: (0)

Quote:
Originally Posted by Mike Benvo View Post
I probably updated 10 DCT's and DME's last week to the latest versions, as a newer DCT version was recently released.
Interesting ... do you have any more information on the DCT update?
Appreciate 0
      11-15-2012, 06:13 PM   #688
Wendall
***Major MammelToe
Wendall's Avatar
United_States
157
Rep
1,139
Posts

Drives: E92 M3 SG coupe
Join Date: Feb 2012
Location: Orange County, CA

iTrader: (3)

I just flashed my software to 240E and I gained 30HP!

I'm kidding!

But I really did have Tom at EAS flash my 08 to the new 240E update. I have to say Tom is awesome. He didn't try to sell stuff I didn't need, but instead he was a wealth of information.

He checked my current software version which was 220E which suprised me since I didn't think dealer had updated it in a while. Tom openly admitted that I probably won't feel any substantial gains in power.

All I can say is that I don't feel any more power but I did notice a smoother delivery of power across the band. Normally when im passing someone and step on the gas, my car violently jumps up. Like going from mild to crazy.

Now, its pulls strong all the way through. I like it seems more predictable. If i want the crazy? I just put the pedal to the floor until i hit the overdrive.

Worth it? I think so. Plus its cool to see all the other cars in the parking lot and in the garage bay.
__________________
E92 M3 SG DCT - AA Filter, Verstraβe Paddles, ECS SS, MH race stud, Stoptech BBK, MR Exhaust,RE Pulley, BPM Tune,Euro bumper and GTS lip, Euro MDM & DCT, KW CS, Recaro PP, TMS Soild Diff Mounts, MRF solid subframe mounts, GTS aero, RPM track built motor.

Appreciate 0
      11-15-2012, 07:02 PM   #689
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8056
Rep
18,786
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by biggynuts01 View Post
I just flashed my software to 240E and I gained 30HP!

I'm kidding!

But I really did have Tom at EAS flash my 08 to the new 240E update. I have to say Tom is awesome. He didn't try to sell stuff I didn't need, but instead he was a wealth of information.

He checked my current software version which was 220E which suprised me since I didn't think dealer had updated it in a while. Tom openly admitted that I probably won't feel any substantial gains in power.

All I can say is that I don't feel any more power but I did notice a smoother delivery of power across the band. Normally when im passing someone and step on the gas, my car violently jumps up. Like going from mild to crazy.

Now, its pulls strong all the way through. I like it seems more predictable. If i want the crazy? I just put the pedal to the floor until i hit the overdrive.

Worth it? I think so. Plus its cool to see all the other cars in the parking lot and in the garage bay.
Good talking shop with you this afternoon!

Let me know when we're ready for round 2.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      11-15-2012, 09:45 PM   #690
BPMSport
BimmerPost Supporting Vendor
BPMSport's Avatar
United_States
3381
Rep
7,539
Posts


Drives: Harrop M3 / F10 M5 / F82 M4
Join Date: Apr 2008
Location: SoCal

iTrader: (9)

Garage List
2000 BMW M5  [0.00]
1990 BMW 735i Turbo  [0.00]
2008 BMW M3  [7.50]
2015 BMW M3  [0.00]
2015 BMW M5  [0.00]
Quote:
Originally Posted by biggynuts01
I just flashed my software to 240E and I gained 30HP!

I'm kidding!

But I really did have Tom at EAS flash my 08 to the new 240E update. I have to say Tom is awesome. He didn't try to sell stuff I didn't need, but instead he was a wealth of information.

He checked my current software version which was 220E which suprised me since I didn't think dealer had updated it in a while. Tom openly admitted that I probably won't feel any substantial gains in power.

All I can say is that I don't feel any more power but I did notice a smoother delivery of power across the band. Normally when im passing someone and step on the gas, my car violently jumps up. Like going from mild to crazy.

Now, its pulls strong all the way through. I like it seems more predictable. If i want the crazy? I just put the pedal to the floor until i hit the overdrive.

Worth it? I think so. Plus its cool to see all the other cars in the parking lot and in the garage bay.
Pointless to go from 220E to 231E or 240E unless its part of a tune.

Waste of money. 220E is not even really that old. Today I updated two cars from 80E software, that's old and worth it in that case. Other than that all of you should not be fooled by sales gimmicks. If you're 190E or above I wouldn't even bother. If someone wants to offer me a dyno I will flash every version from the inception of e9x m3 to prove it - over 10 versions. Then you will see the truth. If you don't believe me ask Sal at eVolve also. We've had long discussions about this 'smoke and mirrors'.
__________________

-----| Like us on Facebook | Instagram || Tuning Information | Remote Coding |-----
----Visit us at www.BPMSport.com - Emotion. Driven. | Toll Free: (888) 557-5133----
Appreciate 0
      11-16-2012, 07:26 AM   #691
Lerxst M4
Command Sergeant Major of the Army
Lerxst M4's Avatar
United_States
141
Rep
639
Posts

Drives: F82 M4
Join Date: Mar 2012
Location: Tejas

iTrader: (4)

Just emailed my SA at Momentum BMW in Houston asking him what my current version was. He looked up my inf0o and told me that I was running: E89X-08-03-520.

Does this sound like the most updated version (231E)?
__________________
2018 F82 M4 ZCP
2015 F13 M6 ZCP (gone)
2013 F10 M5 (gone)
2008 E90 M3 (gone)
Appreciate 0
      11-16-2012, 08:33 AM   #692
Wendall
***Major MammelToe
Wendall's Avatar
United_States
157
Rep
1,139
Posts

Drives: E92 M3 SG coupe
Join Date: Feb 2012
Location: Orange County, CA

iTrader: (3)

Quote:
Originally Posted by Mike Benvo View Post
Pointless to go from 220E to 231E or 240E unless its part of a tune.

Waste of money. 220E is not even really that old. Today I updated two cars from 80E software, that's old and worth it in that case. Other than that all of you should not be fooled by sales gimmicks. If you're 190E or above I wouldn't even bother. If someone wants to offer me a dyno I will flash every version from the inception of e9x m3 to prove it - over 10 versions. Then you will see the truth. If you don't believe me ask Sal at eVolve also. We've had long discussions about this 'smoke and mirrors'.
I agree and Tom at EAS told me the same thing. At the end of the day, I just wanted the latest software.
__________________
E92 M3 SG DCT - AA Filter, Verstraβe Paddles, ECS SS, MH race stud, Stoptech BBK, MR Exhaust,RE Pulley, BPM Tune,Euro bumper and GTS lip, Euro MDM & DCT, KW CS, Recaro PP, TMS Soild Diff Mounts, MRF solid subframe mounts, GTS aero, RPM track built motor.

Appreciate 0
      11-16-2012, 09:11 AM   #693
Sales@Evolve
BimmerPost Supporting Vendor
92
Rep
1,064
Posts


Drives: Slow
Join Date: Feb 2008
Location: Luton, Bedfordshire

iTrader: (0)

Quote:
Originally Posted by Mike Benvo View Post
Pointless to go from 220E to 231E or 240E unless its part of a tune.

Waste of money. 220E is not even really that old. Today I updated two cars from 80E software, that's old and worth it in that case. Other than that all of you should not be fooled by sales gimmicks. If you're 190E or above I wouldn't even bother. If someone wants to offer me a dyno I will flash every version from the inception of e9x m3 to prove it - over 10 versions. Then you will see the truth. If you don't believe me ask Sal at eVolve also. We've had long discussions about this 'smoke and mirrors'.
Myself and Mike have been communicating on this matter for quite some time now as he knows we dyno test E9x M3's regularly.

Quite frankly, we just don't understand where these huge gains come from.

We only saw a handful of cars with something as old as 80E (even had one 60E). The gains were minimal.

Going from anything like 140E-220E > 231E made absolutely no difference at all.

Well.. it could if you don't log the variables ...

The testing procedure includes us making sure the older software is given a chance to perform with as low as possible IAT's and allowing using the dyno test with the stabilised ignition advance.
Then load in the update and we see now higher ignition advance being achieved.

So this is with respect to properly controlled dyno testing for power.

We are also gaining the same power once tuning and exhausts are done on earlier versions as late versions.

At one point we thought it might be the USA software being different but this proved to be incorrect.

Many many evolve-R customers have had this update and every time I am asked if the power will be increased my response is the same. Apparently it does but we have not seen enough evidence to say it's definite.

However, nothing wrong with having the latest SW... especially if its free of charge.
Appreciate 0
      12-05-2012, 06:44 PM   #694
Skooterbrah
First Lieutenant
Skooterbrah's Avatar
57
Rep
344
Posts

Drives: 08 alpine white dct
Join Date: Oct 2012
Location: Colorado

iTrader: (0)

Not sure what i had or what i have now. I was reading that the factory update is one of the better upgrades as far as reliable power.

This is what the paper from the dealership reads

ISTA/P Version: 48.1.002

Integration level (plant): E89X-08-03-520
Integration level (old) E89x-11-03-511
Integration level (new) E89X-12-07-508


Any able to shed some light on all this? Thanks!
__________________
-08 E92 Brushed Steel DCT-
KW V3's - AR Design - Volk TE37 - Vorsteiner - ESS/AR 700
-2012 GTR Premium-
Jacks 3.8 - Jacks Drag 800 w/ billet gears - AAM GT-900R - Swift - DPE ST7's - Ecutek via Visconti - 9.4 @150mph 7200ft DA - 185.5mph 1/2 mile 9240ft DA
Appreciate 0
      12-05-2012, 07:24 PM   #695
MilehighM3
Brigadier General
MilehighM3's Avatar
United_States
910
Rep
3,452
Posts

Drives: Harrop E90 M3
Join Date: May 2011
Location: Colorado Springs

iTrader: (14)

Garage List
2009 E90 M3  [6.50]
Dealers and BMW will not just update mostly due to the risks associated with programming. Failed control units add up in price quickly. Sometimes if you're lucky, you can get updated for another reason. Re: nav, telephone or audio system software updates needed. The entire car gets updated at the same time, so in that case you're good to go!

Edit: ISTA/P 2.46 is referred to as 231E around here. 2.47 is referred to as 240E. I'm not sure what 2.48 is referred to as, since it is only a couple of weeks old. I've yet to see any data on available tunes or tuner experience with the latest version, if there is indeed a relevant update to the previous version. Perhaps some one with experience in the tuning aspect of this platform will stumble in here and offer their input.
Appreciate 0
      12-05-2012, 08:50 PM   #696
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8056
Rep
18,786
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by Skooterbrah View Post
Not sure what i had or what i have now. I was reading that the factory update is one of the better upgrades as far as reliable power.

This is what the paper from the dealership reads

ISTA/P Version: 48.1.002

Integration level (plant): E89X-08-03-520
Integration level (old) E89x-11-03-511
Integration level (new) E89X-12-07-508


Any able to shed some light on all this? Thanks!
Likely you are on 240E.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      12-08-2012, 01:19 AM   #697
BPMSport
BimmerPost Supporting Vendor
BPMSport's Avatar
United_States
3381
Rep
7,539
Posts


Drives: Harrop M3 / F10 M5 / F82 M4
Join Date: Apr 2008
Location: SoCal

iTrader: (9)

Garage List
2000 BMW M5  [0.00]
1990 BMW 735i Turbo  [0.00]
2008 BMW M3  [7.50]
2015 BMW M3  [0.00]
2015 BMW M5  [0.00]
Quote:
Originally Posted by Skooterbrah View Post
Not sure what i had or what i have now. I was reading that the factory update is one of the better upgrades as far as reliable power.

This is what the paper from the dealership reads

ISTA/P Version: 48.1.002

Integration level (plant): E89X-08-03-520
Integration level (old) E89x-11-03-511
Integration level (new) E89X-12-07-508


Any able to shed some light on all this? Thanks!
48.1 Just came out.

I'll take a look at the factory files tomorrow and tell you what it is. 240E would be the minimum for sure. 240E was released with 47.1 I believe.
__________________

-----| Like us on Facebook | Instagram || Tuning Information | Remote Coding |-----
----Visit us at www.BPMSport.com - Emotion. Driven. | Toll Free: (888) 557-5133----
Appreciate 0
      12-08-2012, 10:19 AM   #698
Skooterbrah
First Lieutenant
Skooterbrah's Avatar
57
Rep
344
Posts

Drives: 08 alpine white dct
Join Date: Oct 2012
Location: Colorado

iTrader: (0)

Quote:
Originally Posted by Mike Benvo View Post
48.1 Just came out.

I'll take a look at the factory files tomorrow and tell you what it is. 240E would be the minimum for sure. 240E was released with 47.1 I believe.
Thanks!
__________________
-08 E92 Brushed Steel DCT-
KW V3's - AR Design - Volk TE37 - Vorsteiner - ESS/AR 700
-2012 GTR Premium-
Jacks 3.8 - Jacks Drag 800 w/ billet gears - AAM GT-900R - Swift - DPE ST7's - Ecutek via Visconti - 9.4 @150mph 7200ft DA - 185.5mph 1/2 mile 9240ft DA
Appreciate 0
      12-19-2012, 12:16 AM   #699
Jch99
Private First Class
11
Rep
172
Posts

Drives: e92 m3
Join Date: Jul 2011
Location: Seattle

iTrader: (0)

Can someone please tell me what software I have or how I can find out?

E89x-11-09-505

I'm a little confuse also - are there two different types of software...One for the car and one for DCT?

Thanks!!
Appreciate 0
      12-19-2012, 12:21 AM   #700
BPMSport
BimmerPost Supporting Vendor
BPMSport's Avatar
United_States
3381
Rep
7,539
Posts


Drives: Harrop M3 / F10 M5 / F82 M4
Join Date: Apr 2008
Location: SoCal

iTrader: (9)

Garage List
2000 BMW M5  [0.00]
1990 BMW 735i Turbo  [0.00]
2008 BMW M3  [7.50]
2015 BMW M3  [0.00]
2015 BMW M5  [0.00]
Quote:
Originally Posted by Jchan99 View Post
Can someone please tell me what software I have or how I can find out?

E89x-11-09-505

I'm a little confuse also - are there two different types of software...One for the car and one for DCT?

Thanks!!
Software for engine, and software for transmission.

Software for 25 other modules in the car too. This thread just talks about the engine part.

At E89x-011-09-505, you'll be on ISTA/P 2.44.0. Probably 220E. No reason to update unless you're getting a tune anyway.
__________________

-----| Like us on Facebook | Instagram || Tuning Information | Remote Coding |-----
----Visit us at www.BPMSport.com - Emotion. Driven. | Toll Free: (888) 557-5133----
Appreciate 0
      12-19-2012, 12:27 AM   #701
BPMSport
BimmerPost Supporting Vendor
BPMSport's Avatar
United_States
3381
Rep
7,539
Posts


Drives: Harrop M3 / F10 M5 / F82 M4
Join Date: Apr 2008
Location: SoCal

iTrader: (9)

Garage List
2000 BMW M5  [0.00]
1990 BMW 735i Turbo  [0.00]
2008 BMW M3  [7.50]
2015 BMW M3  [0.00]
2015 BMW M5  [0.00]
To make it easier for everyone (had to find it deep in the factory programming system):

ISTA/P Version;Integration Level

220E:
ISTA/P;2.43.2;E89X-11-09-503
ISTA/P;2.44.0;E89X-11-09-505
ISTA/P;2.45.0;E89X-11-09-506
ISTA/P;2.45.1;E89X-11-09-506
ISTA/P;2.45.2;E89X-11-09-506

231E:
ISTA/P;2.46.0;E89X-12-03-500
ISTA/P;2.46.1;E89X-12-03-502
ISTA/P;2.46.2;E89X-12-03-502
ISTA/P;2.46.3;E89X-12-03-502
ISTA/P;2.46.4;E89X-12-03-502
ISTA/P;2.47.0;E89X-12-07-502

240E:
ISTA/P;2.47.1;E89X-12-07-503
ISTA/P;2.47.2;E89X-12-07-504
ISTA/P;2.47.3;E89X-12-07-504
ISTA/P;2.47.4;E89X-12-07-506
ISTA/P;2.47.5;E89X-12-07-507
ISTA/P;2.47.6;E89X-12-07-507
ISTA/P;2.47.7;E89X-12-11-507
ISTA/P;2.48.0;E89X-12-11-507

These are to give you a general idea. There could be slight overlap.
__________________

-----| Like us on Facebook | Instagram || Tuning Information | Remote Coding |-----
----Visit us at www.BPMSport.com - Emotion. Driven. | Toll Free: (888) 557-5133----
Appreciate 0
      12-19-2012, 05:20 AM   #702
aussiem3
Colonel
aussiem3's Avatar
Australia
270
Rep
2,663
Posts

Drives: Goggomobil
Join Date: Jul 2007
Location: Kangaroo land

iTrader: (1)

Garage List
Information overload Thank you for sharing.
__________________
F86 X6///
Appreciate 0
      12-19-2012, 01:39 PM   #703
Jch99
Private First Class
11
Rep
172
Posts

Drives: e92 m3
Join Date: Jul 2011
Location: Seattle

iTrader: (0)

Quote:
Originally Posted by Mike Benvo View Post
Software for engine, and software for transmission.

Software for 25 other modules in the car too. This thread just talks about the engine part.

At E89x-011-09-505, you'll be on ISTA/P 2.44.0. Probably 220E. No reason to update unless you're getting a tune anyway.
Thanks for the response!! So no point to upgrade? How do i know what DCT software I have. Thanks

I need some remote coding done....can you PM me pricing info?

Thanks!
Appreciate 0
      12-19-2012, 05:40 PM   #704
M3PO
Colonel
M3PO's Avatar
83
Rep
2,792
Posts

Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

iTrader: (7)

Quote:
Originally Posted by Jchan99 View Post
Thanks for the response!! So no point to upgrade? How do i know what DCT software I have. Thanks

I need some remote coding done....can you PM me pricing info?

Thanks!
There won't be a big difference for you, so I say no. If you have only had your car updated by BMW, it has DCT software that corresponds to the DME software (220E in your case) because BMW updates the WHOLE car at once.
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:40 AM.




m3post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST