Aggressive Fitment Thread - Page 3

Raptor251 · 01-22-2011, 02:24 PM

I actually read a bunch of different posts off of this forum that said "the M6 wheels would never fit" when searching google. Just wanted to let anyone know who didnt already because the only way I was able to find out was by trying it!

Dustin@AEperformance · 01-22-2011, 03:53 PM

Quote:

Originally Posted by Bart@AUTOcouture

The pics have a 265/35/19. I'm going 265/30/19 to achieve the same stance/setup as this car - http://www.m3post.com/forums/showthread.php?t=439800

Nice, I love that car's setup. You doing CH's too? I test fitted my rear 10 ET20 with the 275/35 on my front, but it was a little too tall. I'm going to try a 275/30 and see what happens. Should fit like a glove!

11' AW M3 · 01-23-2011, 03:58 PM

to all the aggressive fitment guru's (and Dustin who has been very helpful), what do you think about a 20*10.5 +18.6ish rear? Am I pushing it too much? What size tire would you recommend for this setup?

wheeladdicts · 01-23-2011, 04:01 PM

Quote:

Originally Posted by 11' AW M3

to all the aggressive fitment guru's (and Dustin who has been very helpful), what do you think about a 20*10.5 +18.6ish rear? Am I pushing it too much? What size tire would you recommend for this setup?

I know a 295/25/20 Nitto Invo works on an E90 M3 with a couple mm to spare. Using stock alignment settings...meaning car was lowered and never got an alignment afterwards.

Dustin@AEperformance · 01-23-2011, 04:05 PM

Yea, a 285 or 295 should fit no problem!

2005STi · 01-28-2011, 01:40 AM

Some words of advice to you arrogant, uniformed, self-absorbed BMW owners who think you know a thing or two about your cars but really just bullshit through life:

1. If you look at any other forum's "aggressive fitment thread" you will see something gravely different than what's in here.

So,

1. If you're not on coilovers - you're not aggressive.

2. If you fenders are not at least rolled - you're not aggressive

3. If you have wheel gap- you're not aggressive

4. If you do not have wheel gap as a result of your meaty ass tire - you have meaty tires; you're not aggressive.

5. If you're above the minimum tire size requirement for your given wheel size - you're not aggressive. This is preventing you from being aggressive.

6. If your offset is not at least 10mm lower than your stock wheels - you're not aggressive.

With all of this said, all of you have very nice wheels. So all this is is a wheel thread. So most of you need to try again. Learn a few lessons from Pre- E46s

- An STi that dynos more torque on a stock turbo than any of you will N/A

duk · 01-28-2011, 01:42 AM

^ will last long around here lol

chris s · 01-28-2011, 04:10 AM

Quote:

Originally Posted by 2005STi

Some words of advice to you arrogant, uniformed, self-absorbed BMW owners who think you know a thing or two about your cars but really just bullshit through life:....................

- An STi that dynos more torque on a stock turbo than any of you will N/A

It's STILL a Subaru!

Bob MG · 01-28-2011, 05:42 AM

20x9 ET 20 (255/30/20)
20x11 ET 25 (305/25/20)

wheeladdicts · 01-28-2011, 09:06 AM

Quote:

Originally Posted by 2005STi

2. If you fenders are not at least rolled - you're not aggressive

I guess there will never be an "aggressive" M3 then considering they dont have any fender lip to roll...

Eugene-TAIWAN · 01-28-2011, 10:09 AM

sick thread!

my set up is
19x9J ET15
19x11J ET15
F: 265/30/19
R: 295/30/19

Hedges · 01-28-2011, 10:41 AM

Quote:

Originally Posted by M3This

Specs:

Front: 10x19 ET20 265/30 R19
Rear: 10x19 ET20 -10mm Spacer= Et10 265/30 R19

Thread: http://www.m3post.com/forums/showthread.php?t=439800

Very sexy stance!

mkPOTO · 01-28-2011, 11:15 AM

love this thread!

SIN3 · 01-28-2011, 04:01 PM

is white the only color available? all i see is a sea of white M3's....

11' AW M3 · 01-28-2011, 05:40 PM

Quote:

Originally Posted by wheeladdicts

I know a 295/25/20 Nitto Invo works on an E90 M3 with a couple mm to spare. Using stock alignment settings...meaning car was lowered and never got an alignment afterwards.

Quote:

Originally Posted by Dustin@AEperformance

Yea, a 285 or 295 should fit no problem!

Thank you both

My new setup will be:
20 * 8.5 +15 255/30/20 PS2
20*10.5 +18 295/25/20 PS2

Hope it works with no problems

chiefinsd · 02-01-2011, 01:39 PM

Hey Guys, I have have an e92 non M and i have a set of Rial Daytona's i want to put on but they have e39 fitment. The fronts have an et14 and the rears have an et19 can someone help me out and suggest what i need to make this work i know i have to get hub centrics rings due to the bore. Also the tire sizes are 275/30/19 rears and 245/35/19 fronts. Thanks in advance.

Jay

Ilia@IND · 02-01-2011, 01:47 PM

I can't believe that STI guy took the time to register just to tell us about wheel fitment

M3E92's car with CHs is one of my favorite cars on M3Post. The stance is amazing!

M GmbH · 02-01-2011, 02:31 PM

Winner! This one is F-ing perfect.

Quote:

Originally Posted by Bob MG

20x9 ET 20 (255/30/20)
20x11 ET 25 (305/25/20)

TW0929 · 02-07-2011, 07:41 PM

sick thread!!

InTheNightKitchen · 03-18-2011, 03:30 PM

Quote:

Originally Posted by wheeladdicts

These are the most aggressive we have done on an E9x M3.

ZERO RUBBING!

Quote:

Originally Posted by M3This

Specs or ban! :P

Reanimation...

How are you gonna post this with no specs, and then ignore a fellow poster with no specs?

wheeladdicts · 03-18-2011, 03:37 PM

Sorry guys didnt even see the previous question. This setup took alot of time and money to get right so I can't release the exact offsets :/

The sizes were 20x9 (245/30/20 Nitto Invo) and 20x11 (285/25/20 Nitto Invo).

Its a tricky setup to make look good because if the car is not extremely lowered it doesnt look right. The rear tire is stretched so the wheel well looks empty if it isn't lowered aggressively.

andrew270681 · 03-18-2011, 04:34 PM

Quote:

Originally Posted by M3This

Specs:

20x9 et8 fronts with 255/30/20 tires.
20x10 et18 with 285/30/20 rears.

NOTES: according to the thread camber was need to fit

Thread: http://www.m3post.com/forums/showthread.php?t=244881

I have exactly the same rims with 245 30 20 tyres lowered on eibachs and didnt nedd to do any camber adjustment

01-23-2011, 03:58 PM	#47
11' AW M3 Major Drives: 11' ZCP E92 M3 Join Date: May 2009 Location: california Posts: 1,229 iTrader: (2)	to all the aggressive fitment guru's (and Dustin who has been very helpful), what do you think about a 20*10.5 +18.6ish rear? Am I pushing it too much? What size tire would you recommend for this setup? __________________ 2011 AW/FR Extended E92 M3... fully loaded

01-28-2011, 01:42 AM	#51
duk ///M Drives: 2011 AW/FR 6MT E92 Join Date: Jun 2007 Location: San Jose, CA Posts: 2,700 iTrader: (0)	^ will last long around here lol __________________ 2011 AW/FR 6MT E92 \| Powered by Premier \| Alekshop \| ESS \| Rok n Peace Clothing: www.roknpeace.com

01-28-2011, 05:42 AM	#53
Bob MG Moderating Drives: like a muppet Join Date: Oct 2009 Location: Vienna Posts: 1,738 iTrader: (0)	20x9 ET 20 (255/30/20) 20x11 ET 25 (305/25/20) Attached Images

01-28-2011, 10:09 AM	#55
Eugene-TAIWAN Brigadier General Drives: E92 M3 Coupe Join Date: Jun 2009 Location: Taiwan Posts: 3,104 iTrader: (4)	sick thread! my set up is 19x9J ET15 19x11J ET15 F: 265/30/19 R: 295/30/19 __________________ Past: Gintani stage3 M3 present: Porsche 993, 964,997.1 GT3, Panamera Turbo waiting to be delivered 2015: Porsche 991 GT3RS

01-28-2011, 11:15 AM	#57
mkPOTO Mr. Nice Says Hello Drives: 1999 528I Join Date: Dec 2008 Location: Chicago Posts: 13,504 iTrader: (19) Garage List 2008 BMW E92 M3 [2.66] 1999 BMW E39 528i [2.20] 2007 BMW E92 335I [3.00]	love this thread! __________________ BMW E92 M3 EVOLVE Stage II \| EVOLVE X-Pipe \| EVOLVE E-Tronic Exhaust Macht Schnell Stage II intake \| KW V3 \| Volk TE37SL \| BMW Performance Spoiler

01-22-2011, 02:24 PM	#45
Raptor251 ESS Dreaming Drives: 2011.5 e92 m3/Ford Raptor 6.2 Join Date: Jan 2011 Location: San Diego Posts: 871 iTrader: (1)	I actually read a bunch of different posts off of this forum that said "the M6 wheels would never fit" when searching google. Just wanted to let anyone know who didnt already because the only way I was able to find out was by trying it!

01-23-2011, 04:05 PM	#49
Dustin@AEperformance Captain Drives: BMW E92 M3 Join Date: Mar 2010 Location: Southern California Posts: 625 iTrader: (2)	Yea, a 285 or 295 should fit no problem!

01-28-2011, 01:40 AM	#50
2005STi Registered Drives: Grey STi Join Date: Jan 2011 Location: hell Posts: 1 iTrader: (0)	Some words of advice to you arrogant, uniformed, self-absorbed BMW owners who think you know a thing or two about your cars but really just bullshit through life: 1. If you look at any other forum's "aggressive fitment thread" you will see something gravely different than what's in here. So, 1. If you're not on coilovers - you're not aggressive. 2. If you fenders are not at least rolled - you're not aggressive 3. If you have wheel gap- you're not aggressive 4. If you do not have wheel gap as a result of your meaty ass tire - you have meaty tires; you're not aggressive. 5. If you're above the minimum tire size requirement for your given wheel size - you're not aggressive. This is preventing you from being aggressive. 6. If your offset is not at least 10mm lower than your stock wheels - you're not aggressive. With all of this said, all of you have very nice wheels. So all this is is a wheel thread. So most of you need to try again. Learn a few lessons from Pre- E46s - An STi that dynos more torque on a stock turbo than any of you will N/A

01-28-2011, 04:01 PM	#58
SIN3 Wheel Fitment Connoisseur Drives: slow and low top down Join Date: Jul 2009 Location: SoCali:Wii Wii Land Posts: 11 iTrader: (0)	is white the only color available? all i see is a sea of white M3's.... __________________ 2006 M3 Cabrio 2004 ZHP Cabrio /stanceworks\ "keep it clean, keep it OEM+"

02-01-2011, 01:39 PM	#60
chiefinsd New Member Drives: like whoa Join Date: Jun 2008 Location: san diego Posts: 8 iTrader: (0)	Hey Guys, I have have an e92 non M and i have a set of Rial Daytona's i want to put on but they have e39 fitment. The fronts have an et14 and the rears have an et19 can someone help me out and suggest what i need to make this work i know i have to get hub centrics rings due to the bore. Also the tire sizes are 275/30/19 rears and 245/35/19 fronts. Thanks in advance. Jay Last edited by chiefinsd; 02-01-2011 at 01:57 PM.

02-01-2011, 01:47 PM	#61
Ilia@IND BimmerPost Supporting Vendor Drives: 08 Alpine M3 Join Date: Oct 2006 Location: Chicago Posts: 1,930 iTrader: (3)	I can't believe that STI guy took the time to register just to tell us about wheel fitment M3E92's car with CHs is one of my favorite cars on M3Post. The stance is amazing! __________________

02-07-2011, 07:41 PM	#63
TW0929 Lieutenant Drives: E90 M3 Join Date: Feb 2010 Location: NJ Posts: 518 iTrader: (0)	sick thread!!

03-18-2011, 03:37 PM	#65
wheeladdicts Brigadier General Drives: E90 M3 Join Date: Oct 2009 Location: South Florida Posts: 3,131 iTrader: (3)	Sorry guys didnt even see the previous question. This setup took alot of time and money to get right so I can't release the exact offsets :/ The sizes were 20x9 (245/30/20 Nitto Invo) and 20x11 (285/25/20 Nitto Invo). Its a tricky setup to make look good because if the car is not extremely lowered it doesnt look right. The rear tire is stretched so the wheel well looks empty if it isn't lowered aggressively.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search