BMW E90/E92 Custom Coding Possiblities!! - Page 2

TTG · 01-07-2011, 01:05 AM

Quote:

Originally Posted by Mike@Powerchip

My M3 does not do it. Would love to get a readout of your modules in Europe for comparison.

I go to Munich once every couple of years, hopefully you are close to there!

I just went out to the garage to confirm as all of my BMW's have done this.

On the M3 you have to hold the lever down or up (depending on which side you want to turn on) for over a second and angels and rear parking lights turn on.

My car is 100% Us Spec (Euro Delivery though)

My wife's Mini also does the same thing.

Mike Benvo · 01-07-2011, 01:08 AM

Quote:

Originally Posted by TTG

I just went out to the garage to confirm as all of my BMW's have done this.

On the M3 you have to hold the lever down or up (depending on which side you want to turn on) for over a second and angels and rear parking lights turn on.

My car is 100% Us Spec (Euro Delivery though)

My wife's Mini also does the same thing.

That's, I'll try holding it and seeing what happens! On the 335, you didn't have to hold it at all, just up or down and they instantly went on. I can almost bet that that time lapse is one of the wert_## profiles in action....

TTG · 01-07-2011, 01:54 AM

Quote:

Originally Posted by Mike@Powerchip

That's, I'll try holding it and seeing what happens! On the 335, you didn't have to hold it at all, just up or down and they instantly went on. I can almost bet that that time lapse is one of the wert_## profiles in action....

That might be it..... I agree with you. On my 335 it was pretty instant as well.

Green-Eggs · 01-07-2011, 02:41 PM

Will keep it in mind

mazda3ndp · 01-08-2011, 07:57 AM

Mike, is it possible to have the cornering lights stay on fulltime with the headlights?

1MORELAP · 01-09-2011, 03:00 PM

FYI, just got Bavarian Tool. Its useless for 2011s in the area of coding.

kirvan599 · 01-09-2011, 03:09 PM

Mike just did the coding on my 2008 335....

I am so happy with the results! This is what he did:
1) make my xenons turn on when i unlock
2) euro corner delete, and i asked him if he could keep the little corner led's on while turning off the turn signal bulb, and he was able to do it!
3) folding mirrors with key, and rolling up windows with key
4) seat belt chimes and fasten belts warning gone
5) unlock doors when removing key
6) no more idrive accept message
7) digital speed in my display

I am very happy with the service, and I love the new coding! He really knows his stuff and the price was more than fair!

It's worth every penny.

TMR · 01-09-2011, 08:20 PM

wait... he was coding today? WTF ive been bored all day and i would have totally drove out there for coding!!

shamoo · 01-10-2011, 08:33 PM

So when are you coming out to the East Coast again?

classic6 · 01-10-2011, 10:58 PM

Mike, can you PM me the codes for...
-seatbelt chime
-small LED corner lights (I already have the corner lights off)
-Angel Eye fade on when unlocked/locked.

I live in MD and a friend of mine can do the coding, but we cant find these.
If you dont want to send them i understand, if so...THANK YOU!!

Eric

Mike Benvo · 01-11-2011, 04:09 AM

Kirvan - thank you for the kind words!

Sorry I havent posted in a bit, been absolutely buried with work..

I am currently in the process of dissembling and translating codes (for the E60 5 series as well).

Anyone who would like coding, please email me at mbenvo@gmail.com

I can pretty much do it anytime, it's a fairly quick and painless process for me.

shamoo: Feel free to start a group buy in the regional section. If we have enough interest I am more than happy to fly out there and take care of everyone.

I am also working on some other factory BMW programs for coding the ECU/Transmission to the latest software versions from BMW for those of you that want updates to fix lag problems, etc...

Eric: send me an email to mbenvo@gmail.com and I'll give you what you're looking for...

I am lagging on the video that is a compilation of all of this. It will be posted by the end of the week.

Thank you!

-Benvo

spera23 · 01-15-2011, 07:22 PM

Mike,

Im also looking for that Orange LED corner delete code?

Could you help out???

Thanks in advance!

UA · 01-16-2011, 01:49 PM

Mike, sent you an e-mail regarding the possibility of coding the curb monitor (mirror tilt) option on cars without power/memory seats. Let me know if it's possible, thank you.

novablackm3 · 01-19-2011, 03:26 PM

Quote:

Originally Posted by Mike@Powerchip

If there is a lot of interest in your area that merits a trip, I'm willing to fly out there to code everyone's car.

But it should be 10+ people to make it worthwhile..

http://www.m3post.com/forums/showthread.php?t=473488

mike come to dc/md/va please!! i'll get 10 people

Steveo · 01-19-2011, 03:46 PM

Quote:

Originally Posted by Mike@Powerchip

I am also working on some other factory BMW programs for coding the ECU/Transmission to the latest software versions from BMW for those of you that want updates to fix lag problems, etc...

I'm very interested in this, tell me more

Em Trey Drvr · 01-19-2011, 04:12 PM

By any chance, have you been able to code auto day/night mode for navi? I have a 2011 and a guy up here got the menu option to be available, but it didn't actually work.

montreal red · 01-23-2011, 09:43 PM

just the person i need... please pm when u come to the east coast again....hopefully it will be in the NY, VT, NH or MA area.

mkPOTO · 01-23-2011, 09:51 PM

very nice!

Vrrooom3 · 01-25-2011, 11:44 AM

Quote:

Originally Posted by novablackm3

http://www.m3post.com/forums/showthread.php?t=473488

mike come to dc/md/va please!! i'll get 10 people

I'm in as well- please come to this area!

Sedan_Clan · 01-29-2011, 03:03 PM

I'm so IN on this. Mike, check your P/M!

Steveo · 01-29-2011, 06:24 PM

Would love to code out the 'foot on brake before rev to fwd gear change' requirement, Panic mode and Fuel Stop Suggestion in Route Guidance.

Got the Cable and software but dont know how

elp_jc · 01-29-2011, 08:48 PM

Quote:

Originally Posted by Mike@Powerchip

10) Set whether the brake has to be held or not to start the car (particularly useful for automatic cars, can disable the clutch check for manual)

I always disable the clutch switch on all my manual cars, but didn't do it on the M3 because I wouldn't be able to turn 'accessory' and 'ignition' modes on, plus would lose the hill-assist feature. I'd LOVE to be able to start the car without the clutch pedal depressed, but if you code it out, then how do you turn 'accessory' and 'ignition' modes on? Please tell me exactly how coding that out would affect the stock functions.

I'd also like to code out the 'accept' screen, although it goes away after a few seconds. The seatbelt warning is annoying as hell too (and yes, I always wear it, but I have a long driveway). Hey, can you turn off the TPMS warnings??? In case a sensor goes out or the system malfunctions, you don't have the stupid lights and warnings all the time. Curious about that, although during warranty is not going to be an issue.

01-07-2011, 02:41 PM	#26
Green-Eggs Captain Drives: BMW Join Date: Jul 2007 Location: Los Angeles Posts: 806 iTrader: (3)	Will keep it in mind __________________

01-09-2011, 03:00 PM	#28
1MORELAP Captain Drives: '13 Audi S4 Join Date: May 2010 Location: Issaquah, WA Posts: 615 iTrader: (0)	FYI, just got Bavarian Tool. Its useless for 2011s in the area of coding. __________________ I apologize for spelling mistakes up front, they are a result of multitasking.

01-09-2011, 03:09 PM	#29
kirvan599 First Lieutenant Drives: '08 E92 335i Join Date: Nov 2008 Location: Los Angeles, CA Posts: 335 iTrader: (3) Garage List 2008 E92 335i [0.00]	Mike just did the coding on my 2008 335.... I am so happy with the results! This is what he did: 1) make my xenons turn on when i unlock 2) euro corner delete, and i asked him if he could keep the little corner led's on while turning off the turn signal bulb, and he was able to do it! 3) folding mirrors with key, and rolling up windows with key 4) seat belt chimes and fasten belts warning gone 5) unlock doors when removing key 6) no more idrive accept message 7) digital speed in my display I am very happy with the service, and I love the new coding! He really knows his stuff and the price was more than fair! It's worth every penny. __________________

01-09-2011, 08:20 PM	#30
TMR Colonel Drives: M3 Join Date: Jun 2008 Location: Torrance Posts: 2,546 iTrader: (11)	wait... he was coding today? WTF ive been bored all day and i would have totally drove out there for coding!! __________________ 2011 E92 M3 : Angel Eye Brights, Black Grills, VRS decklid, H&R Springs, Magnaflow Exhaust, Proceed V5 with Vishnu Meth www.tmrmzine.com/m3 SOLD E92 335i Stage 3+ with all the toys www.tmrmzine.com/335/ SOLD E39 M5 Modded, What a great car! www.tmrmzine.com/m5/

01-10-2011, 08:33 PM	#31
shamoo Captain Drives: 2008 E92 M3 Join Date: May 2010 Location: SoCal (Irvine & LA) Posts: 746 iTrader: (1)	So when are you coming out to the East Coast again? __________________ 2008 E92 M3 \| 2007 Honda S2000 \| 2001 Honda S2000 \| 1997 Turbo Integra

01-08-2011, 07:57 AM	#27
mazda3ndp Lieutenant Drives: E93 M3 Join Date: Apr 2009 Location: Bergen NJ Posts: 578 iTrader: (8)	Mike, is it possible to have the cornering lights stay on fulltime with the headlights?

01-10-2011, 10:58 PM	#32
classic6 Second Lieutenant Drives: JB/BB E90 M3 Join Date: Aug 2009 Location: Bel Air, MD Posts: 285 iTrader: (2)	Mike, can you PM me the codes for... -seatbelt chime -small LED corner lights (I already have the corner lights off) -Angel Eye fade on when unlocked/locked. I live in MD and a friend of mine can do the coding, but we cant find these. If you dont want to send them i understand, if so...THANK YOU!! Eric __________________ \| ADV.1 10.01SL \| MORR MF52 \| ESS VT1 SUPERCHARGER w/ upgraded pulley \|ROTORA 6/4 BBK \| KW S/O KIT \| RDSPORT SWAYS \| MEISTERSCHAFT GT EXHAUST \| GITANI XPIPE \| VORSTEINER TRUNK \| MODE CARBON FRONT LIP \| PLATTE FORME CARBON SIDE SKIRTS \| CIC CONVERSION \|ONEighty CUSTOM HEADLIGHTS \| JEHNERT DOOR PANELS \| RAINBOW AUDIO \| HELIX PSD \| BMW PSW w/led \| RECARO SPORTSTERS \|

01-11-2011, 04:09 AM	#33
Mike Benvo BimmerPost Supporting Vendor Drives: BPMSport M3 / 7 Series Join Date: Apr 2008 Location: SoCal Posts: 3,216 iTrader: (6)	Kirvan - thank you for the kind words! Sorry I havent posted in a bit, been absolutely buried with work.. I am currently in the process of dissembling and translating codes (for the E60 5 series as well). Anyone who would like coding, please email me at mbenvo@gmail.com I can pretty much do it anytime, it's a fairly quick and painless process for me. shamoo: Feel free to start a group buy in the regional section. If we have enough interest I am more than happy to fly out there and take care of everyone. I am also working on some other factory BMW programs for coding the ECU/Transmission to the latest software versions from BMW for those of you that want updates to fix lag problems, etc... Eric: send me an email to mbenvo@gmail.com and I'll give you what you're looking for... I am lagging on the video that is a compilation of all of this. It will be posted by the end of the week. Thank you! -Benvo __________________ -----\| Like us on Facebook \| Instagram \|\| Tuning Information \| Remote Coding \|----- ----Visit us at www.BPMSport.com - Emotion. Driven. \| Toll Free: (888) 557-5133----

01-15-2011, 07:22 PM	#34
spera23 Second Lieutenant Drives: 335i Join Date: Sep 2009 Location: Toronto Posts: 201 iTrader: (3)	Mike, Im also looking for that Orange LED corner delete code? Could you help out??? Thanks in advance!

01-16-2011, 01:49 PM	#35
UA ///M User Drives: 2011.5 M3 Join Date: Jan 2011 Location: Boston, MA Posts: 172 iTrader: (0)	Mike, sent you an e-mail regarding the possibility of coding the curb monitor (mirror tilt) option on cars without power/memory seats. Let me know if it's possible, thank you.

01-19-2011, 04:12 PM	#38
Em Trey Drvr Private Drives: 2011 E92 M3 Join Date: Mar 2010 Location: Santa Barbara, CA Posts: 98 iTrader: (0)	By any chance, have you been able to code auto day/night mode for navi? I have a 2011 and a guy up here got the menu option to be available, but it didn't actually work. __________________ 2011 M3 Coupe; Brilliant White/Amarone; Competition, Tech, Premium Packages; Everything Else...

01-23-2011, 09:43 PM	#39
montreal red chris Drives: Green Frog Join Date: Jun 2007 Location: Montreal Posts: 12,085 iTrader: (31)	just the person i need... please pm when u come to the east coast again....hopefully it will be in the NY, VT, NH or MA area. __________________ 997.1 GT3RS 2009 WRX STI e92 M3 (gone)

01-23-2011, 09:51 PM	#40
mkPOTO Mr. Nice Says Hello Drives: 1999 528I Join Date: Dec 2008 Location: Chicago Posts: 13,509 iTrader: (19) Garage List 2008 BMW E92 M3 [2.66] 1999 BMW E39 528i [2.20] 2007 BMW E92 335I [3.00]	very nice! __________________ BMW E92 M3 EVOLVE Stage II \| EVOLVE X-Pipe \| EVOLVE E-Tronic Exhaust Macht Schnell Stage II intake \| KW V3 \| Volk TE37SL \| BMW Performance Spoiler

01-29-2011, 03:03 PM	#42
Sedan_Clan Capoeirista Extraordinaire! Drives: AW E92 M3 (prev. an E90 IB M3) Join Date: Jun 2006 Location: The Twilight Zone! Or running your plates... Posts: 4,433 iTrader: (10)	I'm so IN on this. Mike, check your P/M!

01-29-2011, 06:24 PM	#43
Steveo First Lieutenant Drives: E60 M5 Interlagos Blue Join Date: May 2009 Location: Scotland Posts: 369 iTrader: (0)	Would love to code out the 'foot on brake before rev to fwd gear change' requirement, Panic mode and Fuel Stop Suggestion in Route Guidance. Got the Cable and software but dont know how

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search