20" Wheels with Springs?

tomvcarter · 08-03-2010, 10:18 AM

Im on Eibachs (Pro Kit) and was about to install HRE p40s with:
FRONT TYRES 255/30R20 92Y
REAR TYRES 285/25R20 93Y

Am I going to get rubbing?....

nmack8 · 08-04-2010, 08:00 AM

Quote:

Originally Posted by tomvcarter

Im on Eibachs (Pro Kit) and was about to install HRE p40s with:
FRONT TYRES 255/30R20 92Y
REAR TYRES 285/25R20 93Y

Am I going to get rubbing?....

I would guess that really depends on what Offset the Wheels are – there are plenty of guys in the US running these tyre sizes and they tend to run their cars pretty much slammed.

bej · 08-05-2010, 02:40 PM

Tom - yep i'd agree it depends on the offset too and width too..

From a previous thread i think Taz said his ones rub - from the photo it looked like on full lock. you saw mine - they are the same size on the back as yours and i have 245/30/20 on the front.

offsets at rear is et25 and front is et32 - both are well inside the arches so if your's are the same i doubt your's will rub enough if lowered.

did you sell the exhaust?

tomvcarter · 08-06-2010, 09:56 AM

Quote:

Originally Posted by bej

Tom - yep i'd agree it depends on the offset too and width too..

From a previous thread i think Taz said his ones rub - from the photo it looked like on full lock. you saw mine - they are the same size on the back as yours and i have 245/30/20 on the front.

offsets at rear is et25 and front is et32 - both are well inside the arches so if your's are the same i doubt your's will rub enough if lowered.

did you sell the exhaust?

I have a good offer, but then i decided not to sell at the last min, as i could not afford the Akra, and i bought these wheels instead!
Did you buy anything?

08-03-2010, 10:18 AM	#1
tomvcarter First Lieutenant Drives: bmw E92 M3 Join Date: Jan 2009 Location: LONDON, UK Posts: 343 iTrader: (0)	20" Wheels with Springs? Im on Eibachs (Pro Kit) and was about to install HRE p40s with: FRONT TYRES 255/30R20 92Y REAR TYRES 285/25R20 93Y Am I going to get rubbing?.... __________________ HRE P40 Wheels (20" Charcoal), BMW Performance ZCP Spoiler & Splitters, Eisenmann Race, BMW Performance Steering Wheel, Carbon Fibre Exterior Trim (Front & Side Grills), Eibach Pro Springs (Not yet fitted).
	Tweet

08-05-2010, 02:40 PM	#3
bej Private Drives: M3 Conv DCT Join Date: May 2010 Location: London Posts: 83 iTrader: (0)	Tom - yep i'd agree it depends on the offset too and width too.. From a previous thread i think Taz said his ones rub - from the photo it looked like on full lock. you saw mine - they are the same size on the back as yours and i have 245/30/20 on the front. offsets at rear is et25 and front is et32 - both are well inside the arches so if your's are the same i doubt your's will rub enough if lowered. did you sell the exhaust? __________________ M3 Convertible 2008, Jerez Black with individual orange peel effect (factory standard), Fox Red, DCT, EDC, High gloss, carbon leather, comfort access, Logic 7, adaptive headlights, Tubi Rumore, 20" BBS CX-R, 19" OEM and 18" OEM with Winter Tyres....investments in BP/Shell

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search