Pagid RS-19 Yellows

Bubbles · 07-20-2010, 05:55 AM

What are people paying for a front/rear set of Pagid RS-19 pads?

Bubbles · 07-20-2010, 11:41 AM

Quote:

Originally Posted by TrackRat

Lots of $$$$$$$

That's no help!

I've been quote ~$735 for front and rears. I should just pull the trigger for a front BBK.

drivendriver · 07-20-2010, 12:44 PM

Where did you get that quote?

Thanks.

Bubbles · 07-20-2010, 02:37 PM

Quote:

Originally Posted by drivendriver

Where did you get that quote?

Thanks.

Rennstore.com

Quote:

Originally Posted by TrackRat

The BBK price of course doesn't normally include RS-19 pads so if you want the performance and rotor durability that the RS-19's provide, then you'll need to add that cost on.

Agreed, I went with Carbotech XP-12 for the fronts and XP-10 for the rears. If I get fade, on to the BBK.

I went for the "pre-bed option" Mikey Jr. at Carbotech made a hard sell.

STALKER · 07-20-2010, 03:06 PM

Quote:

Originally Posted by TrackRat

The BBK price of course doesn't normally include RS-19 pads so if you want the performance and rotor durability that the RS-19's provide, then you'll need to add that cost on.

Add on about $800 to the cost of a BBK.
I just priced out some RS29s for my AP BBK.

Bubbles · 07-20-2010, 03:42 PM

Quote:

Originally Posted by TrackRat

The XP-12's will provide good bite but they are tougher on rotors than the RS-19's.

Now you tell me, the cost differential equates to the price of new rotors.

drivendriver · 07-20-2010, 07:36 PM

Quote:

Originally Posted by Bubbles

Rennstore.com

Thanks again. I just talked to Craig.

Jason@Renn-Spec · 07-20-2010, 07:46 PM

Quote:

Originally Posted by Bubbles

Now you tell me, the cost differential equates to the price of new rotors.

No because Pagid usually last a little longer than Carbotech. Carbotechs are really nice but they just don't last long!

TUNEDM3 · 07-20-2010, 08:28 PM

Pm me if interested...i have a set of RS19 for the OEM Rear Caliper that has 2 track days on them. They look as good as new.

Bubbles · 07-20-2010, 09:07 PM

Quote:

Originally Posted by drivendriver

Thanks again. I just talked to Craig.

Welcome, I got dinged for extra $$ because you got the last set he had

Quote:

Originally Posted by Jason@Renn-Spec

No because Pagid usually last a little longer than Carbotech. Carbotechs are really nice but they just don't last long!

Good info, thank you. I changed my order to the Pagids.

Bubbles · 07-20-2010, 09:07 PM

Quote:

Originally Posted by TUNEDM3

Pm me if interested...i have a set of RS19 for the OEM Rear Caliper that has 2 track days on them. They look as good as new.

I appreciate it but just got a new set.

drivendriver · 07-21-2010, 08:48 AM

Quote:

Originally Posted by Bubbles

Welcome, I got dinged for extra $$ because you got the last set he had

.

Actually, he told me he had to talk to a Pagid engineer in Florida to get more. So it must have been someone else

. I guess Craig is becoming popular.

Bubbles · 07-21-2010, 09:04 PM

Quote:

Originally Posted by drivendriver

Actually, he told me he had to talk to a Pagid engineer in Florida to get more. So it must have been someone else

. I guess Craig is becoming popular.

No worries...Pads shipped yesterday

adc · 07-28-2010, 01:21 PM

Do these have the metal spring clips on the back? And are they sintered (meaning, no bedding in required)?

I've used XP12 once and based on the wear I'd say they only last for about 4-5 days. Plus I'm just not sure they're as good (or maybe my braking technique needs lots of improvement).

I'm trying to decide for my next set of track pads, currently considering Pagids, Endless (on the $$$ side) and Cobalt Friction XR1/XR3 (under $500).

03SG///M3 · 07-28-2010, 01:30 PM

Yes they have the metal clips and the pad sensors - fit perfectly. You do need to bed them. They are phenominal brake pads.

adc · 07-28-2010, 02:18 PM

Quote:

Originally Posted by 03SG///M3

Yes they have the metal clips and the pad sensors - fit perfectly. You do need to bed them. They are phenominal brake pads.

Thanks!

07-20-2010, 05:55 AM	#1
Bubbles Green Bastard Drives: ZCP-Powered Join Date: Jun 2007 Location: Bishop Bend Posts: 3,523 iTrader: (3)	Pagid RS-19 Yellows What are people paying for a front/rear set of Pagid RS-19 pads? __________________
	Tweet

07-20-2010, 12:44 PM	#3
drivendriver Second Lieutenant Drives: 2010 E83 X3 Join Date: Apr 2009 Location: Alexandria, VA Posts: 269 iTrader: (0)	Where did you get that quote? Thanks. __________________ Track videos: http://www.youtube.com/user/drivendriver

07-20-2010, 08:28 PM	#9
TUNEDM3 Stay Ripping Drives: 1M Join Date: Sep 2008 Location: New York Posts: 406 iTrader: (3)	Pm me if interested...i have a set of RS19 for the OEM Rear Caliper that has 2 track days on them. They look as good as new. __________________ THE GOBBLER- S.O.H

07-28-2010, 01:21 PM	#14
adc Brigadier General Drives: 2009 E90 M3 ED Join Date: Sep 2006 Location: MD/DC Posts: 3,945 iTrader: (6)	Do these have the metal spring clips on the back? And are they sintered (meaning, no bedding in required)? I've used XP12 once and based on the wear I'd say they only last for about 4-5 days. Plus I'm just not sure they're as good (or maybe my braking technique needs lots of improvement). I'm trying to decide for my next set of track pads, currently considering Pagids, Endless (on the $$$ side) and Cobalt Friction XR1/XR3 (under $500). __________________ 2009 E90 M3 ED 2012 MINI Countryman S 2000 Boxster

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-28-2010, 01:30 PM	#15
03SG///M3 Lieutenant Drives: 328 Join Date: Jan 2006 Location: CT Posts: 579 iTrader: (0)	Yes they have the metal clips and the pad sensors - fit perfectly. You do need to bed them. They are phenominal brake pads.